Instrukcja obsługi LawnMaster CLPS4008K

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LawnMaster CLPS4008K (37 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/37
CLPS4008
Operators Manual
Read all safety rules and instructions carefully before operating this tool.
Distributed By Cleva North America 601 Regent Park Court Greenville, SC 29607 (866)-384-8432
40V Cordless Pole Saw CLPS4008
EN p. 2
Type Cordless, Battery-Powered
Rated No Load Speed 2500 r/ min
Cutting dia. 6''
Maximum Length Without Extension 6.4 feet (76.8 inch
Maximum Length With Extension 9.5 feet (108.5 inch)
Guide Bar Length 8''
Net Weight 9.9 lbs
Cutting Head Pivot Angle(s) 45
o /30o /15o /0o /-15o /-30o
Bar Length 8'' (20.3 cm)
Chain Pitch 3/8'' (9.5 mm)
Chain Type 8'' Chain 91PX033X (Oregon)
Guide Bar Type 8'' Bar 547980 (Oregon)
2
CONTENTS
PRODUCT SPECIFICATIONS
GENERAL SAFETY RULES
SYMBOLS
KNOW YOUR CORDLESS POLE SAW
ASSEMBLY
BATTERY PACK AND CHARGER (MAY NOT BE INCLUDED)
OPERATION
CARE AND MAINTENANCE
TROUBLESHOOTING
ENVIRONMENTAL SAFE BATTERY DISPOSAL
WARRANTY POLICY
EXPLODED VIEW
PARTS LIST
NOTES
2
2
3-9
10-11
12-13
14-20
21
22-26
27-31
32
33
34
35
36
37
CONTENTS
PRODUCT SPECIFICATIONS
40V LITHIUM-ION CORDLESS POLE SAW
3
GENERAL SAFETY RULES
WARNING
Read and understand all instructions before using this product. Failure to follow all instructions
listed below may result in electric shock fire and/or serious personal injury., ,
Work Area Safety
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create sparks which may ignite
the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
Electrical Safety
• Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your
body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
• If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of
electric shock.
Personal Safety
• Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention while operating power
tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective

Specyfikacje produktu

Marka: LawnMaster
Kategoria: Niesklasyfikowane
Model: CLPS4008K

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z LawnMaster CLPS4008K, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane LawnMaster

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024