Instrukcja obsługi La Crosse WS6118
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla La Crosse WS6118 (13 stron) w kategorii Klok. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/13
15
LCD2
display
LCD1
display
Battery cover
Hanging holes
Foldable stand
MOONPHASE WALL CLOCK
Instruction Manual
FEATURES:
MOONPHASE WALL CLOCK:
• DCF-77 Radio controlled time with manual setting option
• 12/24 hour time display
• Time display: hour, minute, second
• Alarm setting with snooze function
• Calendar display
Function keys
« Instant Transmission+» is the up and coming state-of-the-art new wireless
transmission technology, exclusively designed and developed by LA CROSSE
TECHNOLOGY.
“IT +” offers you an immediate update of all your outdoor data measured from the
transmitters: follow your climatic variations in real-time!
16
• Weekday display (4 languages to choose from: German, English, French, and Spanish)
• Display 12 Moon phases throughout the year
• Time zone setting
• ºC or ºF temperature display selectable
• Indoor temperature display
• Outdoor temperature display
• Wireless transmission at 868MHz
•
Signal reception intervals at 4 seconds
• Low battery indicator
• Wall mount or freestanding
OUTDOOR TEMPERATURE TRANSMITTER:
• Remote transmission of outdoor temperature to Weather Station
by 868 MHz
• Wall mounting case
• Mounting at a sheltered place. Avoid direct rain and sunshine
TO INSTALL AND REPLACE BATTERIES IN THE MOONPHASE WALL CLOCK
The Moonphase wall clock uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the
batteries, please follow the steps below:
1. Insert finger or other solid object in the space at the bottom center of the battery
compartment and lift up to remove the cover.
2. Insert batteries observing the correct polarity (see marking inside battery compartment).
3. Replace compartment cover.
DO NOT SET THE CLOCK.
TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE
TRANSMITTER
The transmitter uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the batteries, please
follow the steps below:
1. Remove the cover.
17
2. Insert the batteries, observing the correct polarity (see battery compartment marking).
3. Replace the battery cover on the unit.
Alkaline batteries are recommended for use in both units. Avoid using rechargable
batteries.
SETTING UP:
1. Insert the 2 x AA, IEC LR6, 1.5V batteries into the transmitter (See “To install and
replace batteries in the Temperature Transmitter” above).
2. Within 3 minutes, insert 2 x AA, IEC LR6, 1.5V batteries into the Moonphase wall clock as
indicated above (see "To install and replace batteries in the Moonphase wall clock“
above).
3. Once the batteries are in place, all segments of the LCD will light up briefly. Then the
indoor and outdoor temperature - -.-°C, the time as 0:00, the date as 1/1, and weekday will
be displayed.
4. Do not press any buttons for 10 minutes
5. The Moonphase wall clock will start receiving data from the transmitter. The remote
temperature will then be displayed on the Moonphase wall clock. If the outdoor
temperature is not displayed 90 seconds after inserting the batteries into the receiver, all
batteries are needed to be removed and wait for at least 1 minute for reset from step 1.
6. The DCF time code reception will automatically start. This takes typically between 3 - 5
minutes in good conditions. This time period is an excellent opportunity to locate the
transmitter in suitable location outdoors. In order to ensure sufficient 868MHz transmission
however, this should under good conditions be no more than 100 meters from where the
Moonphase wall clock will be finally positioned (see notes on “Positioning” and “868MHz
Reception”).
7. If after 10 minutes the DCF time has not been received, use the SET key to manually enter
the set mode and change either the time or date in order to activate the DCF reception.
When this is successful, the received time will override the manually set time. The date is
also updated with the received time (Please refers to notes on “DCF Radio controlled
time” and “Manual time setting”).
Note:
In the event of changing batteries of the unit ensure that the batteries do not spring free from the
contacts. Always wait at least 1 minute after removing the batteries before reinserting, otherwise
start up and transmission problems may occur.
Specyfikacje produktu
Marka: | La Crosse |
Kategoria: | Klok |
Model: | WS6118 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z La Crosse WS6118, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Klok La Crosse
23 Września 2024
Instrukcje Klok
- Klok Braun
- Klok Lenovo
- Klok Livoo
- Klok Geemarc
- Klok Nedis
- Klok Marquant
- Klok Casio
- Klok Citizen
- Klok ECG
- Klok Krontaler
- Klok TFA
- Klok Auriol
- Klok Techno Line
- Klok La Crosse Technology
- Klok Velleman
- Klok ART
- Klok Oregon Scientific
- Klok Elro
- Klok Hama
- Klok Hager
- Klok Trevi
- Klok Alecto
- Klok Fysic
- Klok Ascot
- Klok Ecom
- Klok Karlsson
- Klok Cresta
- Klok GlobalTronics
- Klok AcuRite
- Klok Fisher Price
- Klok Technoline
- Klok Balance Time
- Klok Chacon
- Klok Irox
- Klok Konig
- Klok Glunz
- Klok Ranex
- Klok BBrain
- Klok Sempre
- Klok ASA
- Klok TFA Dostmann
- Klok Kogan
- Klok Equity
- Klok Focus Electrics
- Klok Gingko
- Klok CyberData Systems
- Klok Electronics International
Najnowsze instrukcje dla Klok
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
28 Września 2024
26 Września 2024
26 Września 2024