Instrukcja obsługi Kramer VS-211X

Kramer router VS-211X

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kramer VS-211X (2 stron) w kategorii router. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

VS VS-211X / -411X Quick Start

P/N:

2900- 301247QS

Rev:

Scan for full manual

VS VS-211X and -411X Quick Start Guide

This guide helps you install and use your VS-211X / VS-411X for the first time.

Go to www.kramerav.com/downloads/VS-411X to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check in the bwhat’s ox

VS VS-211X / - 4K Auto Switcher411X

4 Rubber feet

1 Power adapter and cord

1 Quick start guide

Step 2: Get to know your - -411X VS 211X / VS

The terms HDMI, HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Feature

Function

PROG Micro USB Connector

Connect to upgrade the rmware.

SETUP 4-way DIP-Switches

Set the operation DIP-switches (see ). Setting the DIP-Switches

IN Buttons

Press to select an I input (button lights orange HDM ).

OUT LED

Lights green when an HDMI output is connected.

ON LED

Lights green when the device receives power.

HDMI Connectors ™IN

Connect to an HDMI source (2 for , 4 for ). VS-211X VS-411X

HDMI™ OUT Connector

Connect to an HDMI acceptor.

AUDIO OUT3.5mm Mini Jack

Connector

Connect to an balanced stereo audio acceptor. un

REMOTE IN Terminal block Connector

Connect to contact closure switches by momentary contact between the desired

pin and common GND pin to select an input.

5V DC Power Connector

Connect to the power supply and to the mains electricity.

Step 3: Install - VS 211X / VS- 411X

Install using one of the following methods: VS-211X / VS-411X

• Attach the rubber feet and place the unit on a at surface.

• Fasten a bracket (included) on each side of the unit and attach it to a at surface

(see

www.kramerav.com/downloads/VS-411X).

• Mount the unit in a rack using the recommended rack adapter

(see

www.kramerav.com/product/VS-411X).

• Ensure that the environment (e.g., maximum ambient temperature &

air ow) is compatible for the device.

• Avoid uneven mechanical loading.

• Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

• Reliable earthing of rack-mounted equipment should be maintained.

• Maximum mounting height for the device is 2 meters.

Step 4: Connect the inputs and outputs

Always switch OFF the power on each device before connecting it to your . For best results, we recommend that you VS-211X

always use Kramer high-performance cables to connect AV equipment to the . and are identical VS-211X VS-211X VS-411X

except for the number of inputs.

Setting the DIP-Switches

DIP-switches 1, 2 and 3 are set to (down) by default and DIP-switch 4 is always set to OFF (up). ON

DIP-switch changes take eect immediately.

Feature

Dip-Switch Settings

Switching Mode

OFF (up) Manual mode. –

ON (down) Auto-switching mode. –

Auto-switching Mode

OFF (up) Priority switching mode: the device switches the source with the –

highest priority to the output.

ON (down) Last connected switching mode: the last detected active source is –

auto-switched to the output.

EDID lock

O (up) EDID Locked. –

On (down) EDID parameters are pass -through. –ed

Reserved for Factory Use

It is mandatory to keep set to OFF (up).

For optimum range and performance use the recommended Kramer cables available at www.kramerav.com/product/VS-411X

Step 5: Connect the power

Connect the power cord t / and plug it into the mains electricity. o VS-211X VS-411X

Safety Instructions (See www.kramerav.com for updated safety information).

Caution:

• For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the

terminal or in the User Manual.

• There are no operator serviceable parts inside the unit.

Warning:

• Use only the power cord that is supplied with the unit.

• Disconnect the power and unplug the unit from the wall before installing.

Specyfikacje produktu

Marka:	Kramer
Kategoria:	router
Model:	VS-211X
Kolor produktu:	Czarny
Wysokość produktu:	24.4 mm
Szerokość produktu:	120 mm
Głębokość produktu:	71.5 mm
Waga produktu:	200 g
Szerokość opakowania:	157 mm
Wysokość opakowania:	87 mm
Głębokość opakowania:	120 mm
Certyfikat środowiskowy (zrównoważonego rozwoju):	CE, RoHS, WEEE
Ilość na paczkę:	1 szt.
Gniazdko wyjścia DC:	Tak
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	10 - 90 %
Kod zharmonizowanego systemu (HS):	85176990
Waga wraz z opakowaniem:	700 g
Zakres temperatur (przechowywanie):	-40 - 70 °C
Dopuszczalna wilgotność względna:	10 - 90 %
Ilość portów HDMI:	3
Wersja HDMI:	2.0
HDCP:	Tak
Szerokość pasma:	17.82 Gbit/s
Zużycie energii:	500 mA
Prąd wyjściowy adaptera AC:	2 A
Materiały:	Aluminium
Napięcie wyjściowe adaptera AC:	5 V
HDMI in:	2
Obsługiwane tryby wideo:	2160p
Wersja HDCP:	2.2
Zgodność z zasadami zrównoważonego rozwoju:	Tak
Rodzaj portu wideo:	HDMI
Wyjście 3,5mm:	Tak
Rozszerzone dane identyfikacyjne wyświetlacza (EDID):	Tak