Instrukcja obsługi Korg MR-2000S

Korg Konsola miksująca MR-2000S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Korg MR-2000S (42 stron) w kategorii Konsola miksująca. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/42

Owner’s Manual

Page 2

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Mains powered apparatus shall not be exposed to dripping or

splashing and that no objects filled with liquids, such as vases,

shall be placed on the apparatus.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with

the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

• Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than

the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided

for your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet. (for

USA and Canada)

• Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

• Only use attachments/accessories specified by the

manufacturer.

• Unplug this apparatus during lightning storms or when unused

for long periods of time.

• Turning off the power switch does not completely isolate this

product from the power line so remove the plug from the socket

if not using it for extended periods of time.

• Install this product near the wall socket and keep the power plug

easily accessible.

• WARNING—This apparatus shall be connected to a mains

socket outlet with a protective earthing connection.

• Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate

normally, or has been dropped.

• Do not install this equipment on the far position from wall outlet

and/or convenience receptacle.

• Do not install this equipment in a confined space such as a box

for the conveyance or similar unit.

• Battery shall not be exposed to excessive heat such as

sunshine, fire or the like.

• Excessive sound pressure from earphones and headphones can

cause hearing loss.

• Use only with the cart, stand, tripod, bracket, or table specified

by the manufacturer, or sold with the apparatus. When a cart is

used, use caution when moving the cart/apparatus combination

to avoid injury from tip-over.

The lightning flash with arrowhead symbol

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the product.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

*All product names and company names are the trademarks or registered

trademarks of their respective owners.

THE FCC REGULATION WARNING (for USA)

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

Unauthorized changes or modiﬁcation to this system can void the

user’s authority to operate this equipment.

Notice regarding disposal (EU only)

When this “crossed-out wheeled bin” symbol is displayed on

the product, owner’s manual, battery, or battery package, it

signiﬁes that when you wish to dispose of this product,

manual, package or battery you must do so in an approved

manner. Do not discard this product, manual, package or

battery along with ordinary household waste. Disposing in

the correct manner will prevent harm to human health and

potential damage to the environment. Since the correct method of

disposal will depend on the applicable laws and regulations in your

locality, please contact your local administrative body for details. If

the battery contains heavy metals in excess of the regulated

amount, a chemical symbol is displayed below the “crossed-out

wheeled bin” symbol on the battery or battery package.

This professional device is intended only for use with works for

which you yourself own the copyright, for which you have received

permission from the copyright holder to publicly perform, record,

broadcast, sell, and duplicate, or in connection with activities which

constitute "fair use" under copyright law. If you are not the copyright

holder, have not received permission from the copyright holder, or

have not engaged in fair use of the works, you may be violating

are unsure about your rights to a work, please consult a copyright

attorney. KORG TAKES NO RESPONSIBILITY FOR ANY

INFRINGEMENT COMMITTED THROUGH USE OF KORG

PRODUCTS.

Contents

Introduction ................................. 4

Features .............................................4

Connection example .........................4

Parts of the MR-2000S ......................5

Front panel .................................................5

Rear panel ..................................................7

Screens and operations ...................8

Home screen and

menu list (MENU) screen .................8

Selecting parameters

and setting values ....................8

Basic operation ........................... 9

1. Power and usage ..........................9

2. Connecting

your monitor equipment ..........9

3. Turning the power on/off ..............9

Turning the power on ..................................9

Turning the power off ..................................9

4. Playing back the demo project ..10

Playing back .............................................10

Pausing .....................................................10

Stopping playback ....................................10

Searching for a desired

location during playback .................10

5. The home screen ........................11

6. Recording ....................................12

Selecting the input source ........................13

Selecting the recording format ..................13

Adjusting the input level ............................14

Starting and stopping recording ................15

Record operation lock (REC Lock) ...........15

7. Other

playback/editing operations ..16

Selecting the project/file to play ................16

Selecting a project/file to edit ....................17

8. Other general operations ...........17

Changing the counter mode

in the home screen .........................17

Changing the meter peak hold ..................17

Setting the date and time ..........................18

Editing the project/file name .....................19

Protecting a project ...................................20

Deleting a project/file ................................20

Viewing details about the project/file ........21

9. Using marks within a project .... 21

Adding a mark .......................................... 21

Viewing the mark list ................................ 22

Using marks to move ............................... 22

Editing marks ........................................... 22

Other functions ..........................25

Play mode ....................................... 25

Play list (PLAY LIST) ...................... 25

Creating a play list ................................... 25

Viewing a play list .................................... 26

Editing a play list ...................................... 26

Record mode .................................. 28

Project recording format

(New Project Type) ........................ 28

Settings when WAV (BWF) is selected .... 28

Settings when

DFF, DSF, or WSD are selected ... 28

Recording time for

each format (per 1 Gbyte) .............. 28

System setting (SYSTEM) .............. 29

LCD Contrast ........................................... 29

Synchronization

clock setting (Clock Source) .......... 29

Analog reference

level setting (Reference Level) ...... 29

Mark mode setting (Mark Mode) .............. 30

Device information (Device Info) .............. 30

DSD output fillter settings (DSD Filter) .... 30

Project name setting (Project Name) ....... 31

Resetting the

system setting (Factory Reset) ...... 31

Formatting the hard disk (HDD Format) ... 31

Updating the software (SoftwareUpdate) . 32

Using the MR-2000S

with your computer ............... 33

USB mode ................................................ 33

Hard disk structure and files .................... 33

Using the AudioGate software ................. 35

Appendix ....................................36

Troubleshooting ............................. 36

USB .......................................................... 36

Various messages .......................... 37

Specifications ................................. 38

Main sections ........................................... 38

Main specifications ................................... 38

Included items: ......................................... 39

Demo Project ........................................... 39

Index ...........................................40

Specyfikacje produktu

Marka:	Korg
Kategoria:	Konsola miksująca
Model:	MR-2000S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Korg MR-2000S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Konsola miksująca Korg

Korg D1200mkII Instrukcja

31 Sierpnia 2024

Korg PXR4 Instrukcja

29 Sierpnia 2024

Korg D4 Instrukcja

28 Sierpnia 2024

Korg MR-1000 Instrukcja

28 Sierpnia 2024

Korg Electribe ESX-1 Instrukcja

25 Sierpnia 2024

Korg D12 Instrukcja

22 Sierpnia 2024

Korg D16 Instrukcja

17 Sierpnia 2024

Korg nanoKONTROL2 Instrukcja

14 Sierpnia 2024

Korg MR-2000S Instrukcja

13 Sierpnia 2024

Korg TPB-2 Instrukcja

8 Sierpnia 2024

Instrukcje Konsola miksująca

Najnowsze instrukcje dla Konsola miksująca

American Audio Q-D6 Instrukcja

15 Stycznia 2025

ADB ME1163 Instrukcja

15 Stycznia 2025

Samson L1200 Instrukcja

14 Stycznia 2025

Samson MDR624 Instrukcja

14 Stycznia 2025

Konig KN-DIGICON20 Instrukcja

11 Stycznia 2025

Vonyx STM500BT Instrukcja

11 Stycznia 2025

Rane Sixty-Four Instrukcja

11 Stycznia 2025

Wharfedale SL 1224 USB Instrukcja

11 Stycznia 2025

Glemm MXD 08 Instrukcja

10 Stycznia 2025

Alfatron ALF-VMix41 Instrukcja

8 Stycznia 2025