Instrukcja obsługi Korg Electribe ESX-1

Korg Konsola miksująca Electribe ESX-1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Korg Electribe ESX-1 (108 stron) w kategorii Konsola miksująca. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/108

Owner’s Manual

Precautions

Location

Using the unit in the following locations can result in a

malfunction.

• In direct sunlight

• Locations of extreme temperature or humidity

• Excessively dusty or dirty locations

• Locations of excessive vibration

• Close to magnetic fields

Power supply

Please connect the designated AC/AC power supply

to an AC outlet of the correct voltage. Do not connect

it to an AC outlet of voltage other than that for which

your unit is intended.

Interference with other electrical devices

Radios and televisions placed nearby may experience

reception interference. Operate this unit at a suitable

distance from radios and televisions.

Handling

To avoid breakage, do not apply excessive force to

the switches or controls.

Care

If the exterior becomes dirty, wipe it with a clean, dry

cloth. Do not use liquid cleaners such as benzene or

thinner, or cleaning compounds or flammable

polishes.

Keep this manual

After reading this manual, please keep it for later

reference.

Keeping foreign matter out of your equipment

Never set any container with liquid in it near this

equipment. If liquid gets into the equipment, it could

cause a breakdown, fire, or electrical shock.

Be careful not to let metal objects get into the

equipment. If something does slip into the equipment,

unplug the AC/AC power supply from the wall outlet.

Then contact your nearest Korg dealer or the store

where the equipment was purchased.

THE FCC REGULATION WARNING (for U.S.A.)

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

Unauthorized changes or modification to this system can void

the user’s authority to operate this equipment.

CE mark for European Harmonized Standards

CE mark which is attached to our company’s products of AC

mains operated apparatus until December 31, 1996 means it

conforms to EMC Directive (89/336/EEC) and CE mark

Directive (93/68/EEC). And, CE mark which is attached after

January 1, 1997 means it conforms to EMC Directive (89/

336/EEC), CE mark Directive (93/68/EEC) and Low Voltage

Directive (73/23/EEC).

Also, CE mark which is attached to our company’s products

of Battery operated apparatus means it conforms to EMC

Directive (89/336/EEC) and CE mark Directive (93/68/EEC).

Table of Contents

1. Introduction ...................... 7

Main features ................................. 7

Saving your data on the ESX-1 ................................. 8

About the vacuum tubes ........................................... 8

2. Parts and their functions ...... 9

Top panel........................................ 9

Common section ........................................10

Edit section ................................................11

Part select section .......................................12

Step key section .........................................12

Arpeggiator section....................................13

Rear panel .................................... 14

Front panel ................................... 14

Card section ..............................................14

Items and functions in the display .. 15

3. Basic operation ............... 17

Preparations ................................. 17

Connections...............................................17

Turning the power on/off ............................17

To turn the power on .............................................. 17

To turn the power off .............................................. 17

Playing a Demo song .................... 18

To pause playback ................................................. 18

To resume playback ................................................ 18

To stop playback .................................................... 18

Demo Song List ..........................................18

4. Sample mode .................... 19

Sampling procedure on the ESX-1 ...............19

1. Audition the existing samples (

☞

p.20) ................. 19

2. Record a new sample (

☞

p.21) ............................ 19

3. Edit a sample (

☞

p.23) ....................................... 19

4. Save a sample (

☞

p.32) ...................................... 19

5. Assign the sample to a part ................................ 19

Auditioning samples...................... 20

What is a sample? ................................................. 20

Recording a new sample ............... 21

Sampling...................................................21

Preparations for sampling ....................................... 21

Sampling mode settings .......................................... 21

Recording the sample ............................................. 21

Using the external input sound to trigger sampling.... 22

If sampling does not start when you begin playback . 22

Editing a sample ........................... 23

Setting the start point ..................................23

Setting the end point ..................................23

Setting the loop location .............................23

Adjusting the pitch of the sample .................24

Directly sampling the sound of the

ESX-1 (Resampling) ................. 25

Resampling from the beginning of a pattern or song . 25

Resampling from the middle of a pattern or song ...... 25

Resampling just one note of a part .......................... 26

Slice ............................................. 27

What is “Slice”? ..................................................... 27

Creating a slice sample (TIME SLICE) ...........27

If you were not successful in creating a slice sample .. 28

Try changing the slice step setting (step 3, above) ..... 28

Manually turning slices on/off while you adjust the

sensitivity (paragraph 6, above) ...................... 29

Using individual sample slices ................................. 29

Using a slice sample in a pattern that has a different

beat .............................................................. 30

If a Last Step is specified for the pattern ................... 30

Stretch .......................................... 31

What is “Stretch”?.................................................. 31

Creating a stretch sample ...........................31

Convenient sample-editing functions32

Normalize .................................................32

Truncate ....................................................32

Saving a sample ........................... 33

Saving a sample under a different name ......33

Deleting a sample ...................................... 34

Checking the remaining amount of sampling

area..........................................................34

Specyfikacje produktu

Marka:	Korg
Kategoria:	Konsola miksująca
Model:	Electribe ESX-1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Korg Electribe ESX-1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Konsola miksująca Korg

Korg D1200mkII Instrukcja

31 Sierpnia 2024

Korg PXR4 Instrukcja

29 Sierpnia 2024

Korg D4 Instrukcja

28 Sierpnia 2024

Korg MR-1000 Instrukcja

28 Sierpnia 2024

Korg Electribe ESX-1 Instrukcja

25 Sierpnia 2024

Korg D12 Instrukcja

22 Sierpnia 2024

Korg D16 Instrukcja

17 Sierpnia 2024

Korg nanoKONTROL2 Instrukcja

14 Sierpnia 2024

Korg MR-2000S Instrukcja

13 Sierpnia 2024

Korg TPB-2 Instrukcja

8 Sierpnia 2024

Instrukcje Konsola miksująca

Najnowsze instrukcje dla Konsola miksująca

American Audio Q-D6 Instrukcja

15 Stycznia 2025

ADB ME1163 Instrukcja

15 Stycznia 2025

Samson L1200 Instrukcja

14 Stycznia 2025

Samson MDR624 Instrukcja

14 Stycznia 2025

Konig KN-DIGICON20 Instrukcja

11 Stycznia 2025

Vonyx STM500BT Instrukcja

11 Stycznia 2025

Rane Sixty-Four Instrukcja

11 Stycznia 2025

Wharfedale SL 1224 USB Instrukcja

11 Stycznia 2025

Glemm MXD 08 Instrukcja

10 Stycznia 2025

Alfatron ALF-VMix41 Instrukcja

8 Stycznia 2025