Instrukcja obsługi Konig PA-AMP15000-KN

Konig Sprzęt DJ-ski PA-AMP15000-KN

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Konig PA-AMP15000-KN (82 stron) w kategorii Sprzęt DJ-ski. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/82

PA-AMP2400-KN / 4800-KN

PA-AMP6000-KN / 10000-KN

PA-AMP15000-KN / 20000-KN

POWER AMPLIFIERS

PA VERSTÄRKER

AMPLIFICATEURS DE PUISSANCE

VERSTERKERS

AMPLIFICATORI DI POTENZA

AMPLIFICADORES DE POTENCIA

ERŐSÍTŐK

TEHOVAHVISTIMET

EFFEKT FÖRSTÄRKARE

VÝKONOVÉ ZESILOVAČE

AMPLIFICATOARE DE PUTERE

ENGLISH

Introduction:

A semi-professional ampliﬁ er series which ﬁ ts standard 19” rack cabinets. This ampliﬁ er is

ideal for starting DJs, who desire excellent product reliability. A built-in cooler takes care of

good ventilation and a peak level indicator gives control over the output level. For maximum

ﬂ exibility there is a choice of various speaker connections like a lockable SPK connector,

binding posts or XLR.

Important information before use:

• Keep sufﬁ cient space around the ampliﬁ er to allow adequate air circulation. Also when

mounted in a ﬂ ight case, make sure the airﬂ ow is not obstructed.

• Always switch on the ampliﬁ er after switching on the other equipment and always switch

it off before the other equipment is switched off. If possible with the volume controls set at

minimum, this will avoid annoying and sometimes dangerous signal peaks.

• Make sure the ampliﬁ er is switched off when connecting or disconnecting any cables of the

system equipment.

• Make sure the ampliﬁ er is also off before disconnecting the power cord from the mains

socket.

• The electric system and mains socket have an adequate grounding, compatible with the

safety norms.

• Be sure the required voltage for the ampliﬁ er complies with the local voltage of the mains

circuit.

• Never connect loudspeakers with a lower resistance (Ohm) as required by the ampliﬁ er (see

speciﬁ cations).

Description front panel:

543

1. Ventilation opening

2. Volume control LEFT

3. LED indicators

- CLIP:LED lights up when the ampliﬁ er is reaching it‘s peak power (Note: reduce the volume

to avoid damage to ampliﬁ er and/or loudspeakers)

- SIGNAL: LED lights up with incoming signal from connected equipment

- POWER: LED lights up when the ampliﬁ er is switched on.

4. Volume control RIGHT

5. Power on/off switch

Specyfikacje produktu

Marka:	Konig
Kategoria:	Sprzęt DJ-ski
Model:	PA-AMP15000-KN
Kolor produktu:	Stal nierdzewna
Położenie urządzenia:	Wbudowany
Roczne zużycie energii:	182.5 kWh
Zużycie energii:	0.5 kWh/24h
Pojemność butelek:	6 butel.