Instrukcja obsługi Konig HC-PS100

Konig Libra HC-PS100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Konig HC-PS100 (44 stron) w kategorii Libra. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/44
HC-PS100
Personal scale
1
Advice for use and care:
Ensure the scale is on a at, even and rm surface. Avoid carpet or soft surfaces.
Always weigh yourself with the same scale placed on the same surface. Uneven
oors may affect the reading.
The surface of the scale will be slippery if wet. Keep it dry!
Weigh yourself without clothing and footwear, before meals and always at the same
time of day. Keep the scale in a dry place to protect the electronic components.
Clean after use with a lightly damp cloth, do not use solvents or immerse the product
in water. Avoid overloading the scale, otherwise, permanent damage may occur. A
user who has any metal material inserted into his/her body may get differences in
measurement of body fat reading. Pacemaker users are advised against using this
device.
The scale is designed for household use only, not to be used for commercial
purposes.
Operating instructions
1. Put the scale on a hard at surface (avoiding carpets or any soft surfaces)
2. Switch on the scale by with a slight tap on the glass platform near the LCD
display. Then wait a few seconds, the following will appear: 0.0 kg
Note: The scale will not work properly if you step on the scale before it shows
0.0. If this happens please start from the beginning of step 2.
3. Gently step on the scale. Put your feet parallel on the scale without moving and
wait whilst the scale computer weighs.
When you step off the scale, it will automatically switch off. (If no weighing is carried
out while the zero is being displayed, the scale will automatically switch themselves
off after approximately 6 seconds).
When the scale is overloaded (over 180Kg/396lb), the following will appear on the
screen: Err
When the battery needs replacement, the following will appear on the screen: LO
2
Specications:
Equipped with a high precision „strain-gauge“ sensor.
Capacity 180Kg/396lb
Division 100g/0.2lb/ 1/4lb
LCD display
Foot-tap switch
Automatic zero resetting
Automatic switch off
Over load indicator
Low battery indicator
Lithium battery is included (CR2032). Please remove the insulation sheet from the
battery contacts before using.
Declaration of conformity
We,
Nedis B.V.
De Tweeling 28
5215MC ’s-Hertogenbosch
The Netherlands
Tel.: 0031 73 599 1055
Email: info@nedis.com
Declare that product:
Name: KONIG
Model: HC-PS100
Description: Electronic personal scales
Is in conformity with the following standards
EMC: EN 61000-6-3 : 2001 + A11 : 2004
EN 61000-6-1 : 2001
Following the provisions of the 2004/108/EC directive.
‘s-Hertogenbosch, 2007, November 16
Mrs. J. Gilad
Purchase Director


Specyfikacje produktu

Marka: Konig
Kategoria: Libra
Model: HC-PS100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Konig HC-PS100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Libra Konig

Konig

Konig HC-PS100 Instrukcja

6 Września 2024
Konig

Konig HC-PS300 Instrukcja

4 Września 2024
Konig

Konig KN-PS900B Instrukcja

3 Września 2024
Konig

Konig HC-PS100N Instrukcja

28 Sierpnia 2024
Konig

Konig HC-PS101 Instrukcja

24 Sierpnia 2024
Konig

Konig KN-TS10 Instrukcja

20 Sierpnia 2024
Konig

Konig KN-BS10 Instrukcja

18 Sierpnia 2024
Konig

Konig KN-PS800B Instrukcja

17 Sierpnia 2024
Konig

Konig HC-PS310N Instrukcja

14 Sierpnia 2024
Konig

Konig HC-PS310 Instrukcja

6 Sierpnia 2024

Instrukcje Libra

Najnowsze instrukcje dla Libra