Instrukcja obsługi Kodak Ektar H35N

Kodak kamera Ektar H35N

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kodak Ektar H35N (2 stron) w kategorii kamera. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
G E T T I N G S TA RT ED
1. Camera Back
2. Back Lock
3. Film Cassette Chamber
4. Film Rewind Shaft
5. Flash
6. Film Advance Wheel
7. Film Sprocket Wheel
8. Film Take-up Spool
9. Shutter Release Button
10. Film Counter
11. Viewfinder Eyepiece
12. Flash On/O Wheel
13. Flash Ready Light
14. Film Rewind Button
15. Film Rewind Crank
16. Battery Compartment Cover
17. Lens
18. Camera Starp Holder
19. Star Filter Switch
20. Bulb Shutter
21. Tripod Hole
Quick Start
Guide
KODAK EKTAR H35N
Half Frame Film Camera
Please read this Guide carefully before using and
keep it with you for future reference.
1. Open the Camera Back (1) by releasing the Back Lock (2).
2. Place the film cassette into the Film Cassette Chamber (3),
ensuring that the hollow end of the film is inserted into the
Film Rewind Shaft (4).
3. When the cassette seats properly in place, draw out and
insert the leader of the film into the Film Take-up Spool (8).
4. Press the Shutter Release Button (9) once and roll the
Film Advance Wheel (6).
5. Make sure the film perforations are engaged with the teeth
of the Film Sprocket Wheel (7).
6. Close the Camera Back (1) after the film is loaded correctly.
7. Press the Shutter Release Button (9) once.
Repeat the steps until the Film Counter (10) displays 1.
The Film Counter (10) indicates the number of exposures
of the film roll at the moment.
Loading Film
Using Flash
1. When shooting indoor or in a dim/cloudy environment, turn
on the flash by adjusting the Flash On/O Wheel (12).
2. Wait until the Flash Ready Light (13) is on.
3. Turn the flash o while not in use.
IMPORTANT:
When the Flash is switched on and the Flash Ready Light turns red, flash will
be charged once. Flash will be released for the next photo.
If you dont wish to have flash for the next photo, please switch the Flash
Wheel to the O position.
1. Push open the Battery Compartment Cover (16).
2. Insert one AAA alkaline battery into the Battery Compartment
Cover (16) according to the + indication.
3. Close the Battery Compartment Cover (16).
Loading Battery
S
1
www.retopro.co/kodak
© 2023 RETO Production Ltd. All rights reserved.
The Kodak and Ektar trademarks, Kodak logo and trade dress
are used under license from Kodak.
BATTERY WARNING:
Improper replacement of battery may present a risk of leakage or explosion,
and may cause personal injuries. Mistreated rechargeable battery may
present a risk of fire or chemical burn. Do not disassemble or expose the
battery to conducting materials, moisture or extreme heat. Do not use or
charge the battery if it appears to be leaking, discoloured, deformed, or in
any abnormalities. Do not leave the battery discharged or unused for an
extended period of time. Avoid extremely high or low temperatures during
use, storage or transportation of batteries. Battery life varies with usage.
Non-operational battery should be disposed according to local laws, or
dispose it in a waste bin for electronics if not governed by applicable laws or
regulations. Keep batteries away from children.
Using Star Filter
Using Bulb Shutter
1. Pushing the Star Filter Switch (19) up to apply the Star Filter.
2. Point the camera towards soft light sources such as light bulbs,
and light reflection on water, mirrors, glass surfaces, etc.
3. Press the Shutter Release Button (9) lightly to take a photograph.
4. After taking a photograph, roll the Film Advance Wheel (6) until it
stops rolling.
5. The Star Filter creates 4-beam flares on light spots when applied.
6. Push the Star Filter Switch (19) down while not in use.
1. Insert a tripod into the Tripod Hole (21) in order to stabilise
the camera during bulb photography.
2. Insert a cable release into the Bulb Shutter (20).
3. Press and hold the button of the cable release for the
duration of the shooting. As long as the button of the cable
release is pressed, the shutter remains open.
4. Roll the Film Advance Wheel (6) until it stops rolling to take
the next photo.
Recommendation: When applying the Star Filter, avoid facing strong light which
will result in big flares on the light spots.
Note: Please note that if the film is not advanced before/after using the
Bulb Shutter (20), double exposure will occur. Tripod and cable release
are excluded in the package.
1. Compose your picture by looking through the Viewfinder
Eyepiece (11).
2. Place the key object of your photo at least 1.5 metres
away from you.
3. Determine whether to turn the flash on.
4. Press the Shutter Release Button (9) lightly to take a
photograph.
5. After taking a photograph, roll the Film Advance Wheel
(6) until it stops rolling.
6. Repeat Step 1 to 5 to take the next photo.
Taking Photo Unloading Film
1. After taking the last photo, the Film Advance Wheel (6) will stop
to roll.
2. Press the Film Rewind Button (14) to release the film for rewinding.
3. Lift the Film Rewind Crank (15) and rotate it clockwise to rewind
the film.
4. Open the Camera Back (1) and take out the film for processing.
Note: 1 shot of KODAK EKTAR H35N yields 2 half frame photos. A 36-exp film
gives 72 half frame photos while a 24-exp film gives 48 half frame photos
S
1


Specyfikacje produktu

Marka: Kodak
Kategoria: kamera
Model: Ektar H35N

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kodak Ektar H35N, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje kamera Kodak

Kodak

Kodak Step Touch Instrukcja

15 Grudnia 2024
Kodak

Kodak Ektar H35N Instrukcja

15 Grudnia 2024
Kodak

Kodak Motorised S88 Instrukcja

7 Października 2024
Kodak

Kodak Step Instrukcja

3 Października 2024
Kodak

Kodak 3600ix Instrukcja

23 Września 2024
Kodak

Kodak 4700ix Instrukcja

21 Września 2024
Kodak

Kodak No 10 Cirkut Instrukcja

16 Września 2024

Instrukcje kamera

Najnowsze instrukcje dla kamera