Instrukcja obsługi KLH Audio Kendall 2B

KLH Audio głośnik Kendall 2B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla KLH Audio Kendall 2B (4 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

Kendall mk2 Collection

Kendall 2B Bookshelf Loudspeaker

WELCOME!

Thank you for purchasing one of the best sounding loud-

speakers ever produced. At KLH, we have been making

high-quality components since 1957, and we take pride in

making your music and movies the best experience possi-

ble.

FOR YOUR SAFETY

Important Safety Instructions!

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accor-

dance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other heat producing appliances

9. ONLY USE attachments/accessories speciﬁed by

the manufacturer.

10. DO NOT expose to excess moisture or liquids, and do not

place containers with liquids on top of speakers.

The exclamation point, within an equilateral trian-

gle, is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

product.

The lightning ﬂash with arrowhead symbol within

anequilateral triangle, is intended to alert the user

to the presence of uninsulated “dangerous volt-

age” within the product’s enclosure that may be of

sufﬁcient magnitude to constitute a risk of electrical

shock to persons.

EU COMP LIANCE INFORMAT ION:

Eligible to bear the CE mark, Conforms to European Union

EMC Directive 2004/108/EC; European Union Restriction of

Hazardous Substances Recast (RoHS2) Directive 2011/65/

EC; European Union WEEE Directive 2002/96/EC.

KLH and the KLH logo are registered trademarks of Kelley

Global Brands Inc., registered in the U.S. and other coun-

tries.

WEEE NOTICE

Note: This mark applies only to countries within the European

Union (EU) and Norway.

This appliance is labeled in accordance with Europe-

an Directive 2002/96/EC concerning waste electrical

and electronic equipment (WEEE). This label indi-

cates that this product should not be disposed of with

household waste. It should be deposited at an appro-

priate facility to enable recovery and recycling.

UNPACKING

Place package on the ﬂoor or table top with the box ﬂaps up.

Cut the tape with a utility knife to open the package. Fold the

carton ﬂaps back and carefully slide the speaker and pack-

aging from the box, or turn the box over with ﬂaps open and

remove the box. Stand the speaker and packing upright,

making sure the speaker is right side up, and remove the

packing material.

C A NU T I O

R K OF ELECTRIC SHOCK. IS

DO NOT OPEN.

WARNING: Do Not Open! Risk of Elec ical Shock. Voltages in this tr

equi ent are hazardous to life. No user-servi ble parts in de. pm cea si

Refer all servicing to aliﬁed service personnel. qu

AMPLIFICATION

Conventional ampliﬁcation involves a single stereo ampli-

ﬁer wired to a single set of binding posts with straps con-

necting the second set of posts as seen in diagram above.

Simply attach the positive wire + to the red post, and the

negative wire – to the black post.

BI-AMPLIFICATION

This connection method (see diagram below) uses two sepa-

rate two channel ampliﬁers to power one set of speakers. One

ampliﬁer is attached to one set of binding posts, and another

identical ampliﬁer is attached to the other set of binding posts.

This is referred to as bi-ampliﬁcation.

CONNECTING YOUR

BOOKSHELF LOUDSPEAKERS

This bookshelf loudspeaker has the same quality nickel-plat-

ed binding posts that will accommodate stripped wire,

spade connectors or banana plugs. Be sure to use quality

speaker cables, up to 12 gauge (AWG). The lowest gauge

possible is recommended. Before using banana plugs, be

sure to remove the black and red inserts on the binding

posts. The straps connecting the binding posts should re-

main in place for conventional wiring, but may be removed

where bi-wiring is preferred. See the following diagrams in

the AMPLIFICATION section for further instruction.

ROOM POSITION

Placement of your bookshelf loudspeakers is a personal

preference, but it is recommended that speakers be placed

at least 6 feet apart whether they are being used for a

stereo application, or as the main left and right channels for

a home theater. For best imaging and separation, listening

distance from the speakers should be about 1.5 times the

distance the speakers are apart from each other.

Example: If the distance between each speaker and the

listening position is 9 feet, then the speakers should be 6 feet

apart from one another. Be sure that loudspeakers are placed

at least 12 inches away from any wall. Further adjustments

can be made to optimize your listening experience.

LEFT

SUB

RIGHT

CENTER

SURROUND

LEFT

SURROUND

RIGHT

WARRANTY

Our 10 year warranty begins from purchase date of the item.

(Receipt Date) Warranty registration must be completed at

KLHAUDIO.com/warranty. Registration of the product must

be completed within 120 days of purchase for warranty

validation. Original receipt of purchase must be retained for

proof of purchase. For warranty or service issues, please con-

tact authorized KLH dealer. The warranty covers any produc-

tion and/or material defects of the product. This warranty is

non-transferable.

The following is NOT COVERED by the warranty:

1. Accidents, misuse, poor maintenance, electrical over-

loads such as lightning or voltage.

2. Incorrect use of product.

3. Altered serial number.

4. Transportation costs for service call.

5. Purchase of KLH products from unauthorized reseller.

Replacement item cannot exceed the cost of the item under

warranty. The supplier is responsible for only repair or re-

placement. KLH toll free number is 1-833-554-8326

NOTE:

Binding post wrench is included

/4”-20 Threaded insert

provided for optional

mounting.

Adhesive rubber feet

provided to protect

surfaces.

Specyfikacje produktu

Marka:	KLH Audio
Kategoria:	głośnik
Model:	Kendall 2B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z KLH Audio Kendall 2B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje głośnik KLH Audio

KLH Audio Albany II Instrukcja

30 Września 2024

KLH Audio Quincy Instrukcja

30 Września 2024

KLH Audio Kendall 2C Instrukcja

30 Września 2024

KLH Audio Concord Instrukcja

30 Września 2024

KLH Audio Cambridge Instrukcja

30 Września 2024

KLH Audio Kendall Instrukcja

30 Września 2024

KLH Audio Kendall 2S Instrukcja

30 Września 2024

KLH Audio Kendall 2F Instrukcja

30 Września 2024

KLH Audio Beacon Instrukcja

30 Września 2024

KLH Audio Model Three Instrukcja

30 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel Rockster Air Instrukcja

15 Października 2024

Alpine PSS-22WRA Instrukcja

15 Października 2024

Bauhn APPS-0724 Instrukcja

15 Października 2024

Aiwa SP-A100 Instrukcja

15 Października 2024

Harman Kardon Citation One Instrukcja

14 Października 2024

Alpine 30MC Instrukcja

14 Października 2024

Magnat Needle 9000 ALU Instrukcja

14 Października 2024

Pioneer SP-T22A-LR Instrukcja

14 Października 2024

Sharp PS-932 Instrukcja

14 Października 2024

Pyle PDWR64BTW Instrukcja

13 Października 2024