Instrukcja obsługi Kioxia Exceria


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kioxia Exceria (30 stron) w kategorii Dyski półprzewodnikowe (SSD). Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/30
1/30
Please be sure to check personal.kioxia.com/support/ for the latest rmware
updates.
SAFETY INSTRUCTIONS
Please refer to “Instruction Manual for Safety and Comfort”:
personal.kioxia.com/support/
Note: The following instructions are a general guideline for the SSD installation
and should act as a complement to your system’s owner manual.
LAPTOP INSTALLATION
1. Power o the system, disconnect all power cables, and remove the battery.
2. Locate the hard drive access panel; unscrew and remove the access panel.
3. Disconnect and remove the current storage drive from the drive bay
(refer to your system’s user manual)
4. Remove all brackets and connectors from your current storage drive and
install it on the SSD (if necessary).
Note: If a proprietary connector and/or bracket are present on the current
storage drive, carefully remove it and connect it to the SSD. Systems will
vary and these items may or may not be present.
5. Insert the SSD into the drive bay carefully aligning the SSD with the SATA*
connectors.
6. Secure the SSD in the drive bay. Reinstall the access panel and insert the
battery back into the system.
7. Power on your system to verify a successful installation. For a boot drive,
this is signied by the BIOS prompting OS installation. For a secondary
drive, follow the format instructions below.
Note: If the SSD will be your primary boot drive, please refer to your
operating system’s user manual for further OS installation instructions. If
this SSD will be used as a secondary drive, formatting the drive is required
before use.
*SATA 6Gbit/s is backwards compatible with SATA 3Gbit/s. However,
connecting a SATA 6Gbit/s device into a SATA 3Gbit/s connection will
result in reduced performance.
SATA SSD
Quick Start Guide
TC000G0
2/30 Company names, product names, and service names may be tr ademarks of their respective
companie s © 2020 KIOXIA Corporat ion All rights res er ved
DESKTOP INSTALLATION
1. Power o the system and disconnect all power cables.
2. Remove the system’s outer panel (refer to your system’s user manual).
3. If your system provides a 2.5-inch drive bay(s), there is no need for a 3.5-
inch adapter bracket.
4. If your system does not provide a 2.5-inch drive bay(s), you will need
to mount the SSD in a 2.5-inch to 3.5-inch adapter bracket (3.5-inch adapter
bracket included with select models).
5. Install the SSD into an available drive bay.
6. Connect one end of both the SATA* data cable and power cable to the SATA
connectors on your motherboard and the remaining ends to your SSD.
7. Reinstall the outer panel and reconnect the power cable to your PC.
8. Power on your system to verify a successful installation.
Note: If the SSD will be your primary boot drive, please refer to your
operating system’s user manual for furt her OS installation instructions. If
this SSD will be used as a secondary drive, formatting the drive is required
before use.
*SATA 6Gbit /s is backwards compatible with SATA 3Gbit/s. However,
connecting a SATA 6Gbit/s device into a SATA 3Gbit/s connection will
result in reduced performance.
Following information is only valid for EU-member States:
DISPOSAL OF PRODUCTS:
This symbol indicates that this product must not be treated
as household waste. By ensuring this product is disposed
of correctly, you will help prevent potential negative
consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling
of this product. For more detailed information about recycling
of this product, please contact your local city oce, your
household waste disposal service or the shop where you
purchased the product.
TECHNICAL SUPPORT
Need help?
Please contact us at our regional support page: personal.kioxi a.com/support/
3/30
FCC Information
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution
Changes or modications made to this equipment, not expressly approved by
KIOXIA Corporation or parties authorized by KIOXIA Corporation could void the
user’s authority to operate the equipment.
FCC conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
US Cont act
Name: KIOXIA America, Inc.
Address: 2610 Orchard Parkway,
San Jose, CA 95134, USA
Phone: +1 408-526-2700


Specyfikacje produktu

Marka: Kioxia
Kategoria: Dyski półprzewodnikowe (SSD)
Model: Exceria

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kioxia Exceria, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Dyski półprzewodnikowe (SSD) Kioxia

Instrukcje Dyski półprzewodnikowe (SSD)

Najnowsze instrukcje dla Dyski półprzewodnikowe (SSD)