Instrukcja obsługi Kidde KN-COU-B

Kidde detektor gazu KN-COU-B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kidde KN-COU-B (17 stron) w kategorii detektor gazu. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/17
Manual P/N 2541-7201-01 Rev.B 06/12 EN
ATTENTION: Please take a few minutes to thoroughly read this
user guide which should be saved for future reference and passed
on to any subsequent owner.
Carbon Monoxide Monitor
User Guide
Model: KN-COU-B
Peak Level Memory
Digital Display
Detects Low Levels of Carbon Monoxide
3-AA Battery Operation
Carbon Monoxide Monitor Procedure
1) Operate the Test/Reset button;
2) Call your emergency services (Fire Department or 911);
3) Immediately move to fresh air - outdoors or by an open
door/window. Do a head count to check that all persons are
accounted for. Do not reenter the premises nor move away
from the open door/window until the emergency services
responders have arrived, the premises have been aired out, and
your monitor remains in its normal condition.
4) After following steps 1-3, if the monitor reactivates within a 24
hour period, repeat steps 1-3 and call a qualified appliance
technician to investigate sources of CO from fuel burning
equipment and appliances, and to inspect for proper operation
of equipment.
If problems are identified during this inspection, have the equip-
ment serviced immediately. Note any combustion equipment not
inspected by the technician and consult the manufacturer’s instruc-
tions, or contact the manufacturer’s directly for more information
about CO safety and the equipment. Make sure that motor vehicles
are not, or have not been, operating in a garage attached or adja-
cent to the residence.
Never restart the source of a CO problem until it has been
corrected. Never ignore the sound of the monitor!
If the unit is sounding, pressing the test/reset button will ter-
minate the monitor. If the CO condition that caused the alert
in the first place continues, the unit will reactivate in alert or
full alarm mode. If the unit goes into full alarm again within
six minutes, it is sensing high levels of CO which can quickly
become a dangerous situation.
WARNING:
Full monitor activation
indicates the presence of Carbon Monoxide (CO)
at high concentrations, which can kill you.
PHONE NUMBER:
PHONE NUMBER:
What to do When the Monitor Sounds!
Carbon Monoxide Alert Procedure
Low Level Alert
WARNING: Alerts to the presence of constant low level CO
concentrations (less than 30 ppm). These constant low levels may
pose potential health risks for individuals with certain pre-exist-
ing health or medical conditions. You must consult your health
care provider as to any potential low level CO exposure risk due
to any specific pre-existing heath or medical conditions.
1) Operate the Test/Reset button;
2) If a constant low level of Carbon Monoxide (below 30 ppm) is meas-
ured and persists in your home you should consult your healthcare giver
about the long term impact on your health.
3) Move all occupants to fresh air to avoid any immediate health repercussions.
4) After following steps 1-3, if the unit goes into full alarm follow the
Carbon Monoxide Monitor Procedure for response and evacuation.
If the unit is sounding, pressing the test/reset button will termi-
nate the notification. If the CO condition that caused the alert in
the first place continues, the unit will reactivate in alert or full
alarm mode. If the unit goes into full alarm again within six min-
utes, it is sensing high levels of CO which can quickly become a
dangerous situation.
This CO monitor operates differently than CO and smoke alarms. Like
smoke and CO alarms, this CO monitor samples the air in your home
and sounds a loud alarm to warn you of life threatening conditions. In
addition, this monitor will alert you to lingering low levels of CO (below
30 ppm) which may have heath implications if you suffer from certain
pre-existing health or medical conditions. You should discuss your specif-
ic needs for a low level CO monitor with your healthcare provider to
determine if a low level CO monitor is warranted given a particular pre-
existing medical or health condition.
The way you respond to a CO alarm is quite different than a smoke
alarm. That’s because a house fire and a CO problem are two distinctly
different situations. If your smoke alarm were to alarm, you would
quickly be able to judge the level of danger you were in with your sens-
es. You can see and smell the smoke, feel the heat, see, and possibly
hear the fire burning. You can also readily see if your smoke alarm is
alarming in a non-emergency situation. Because your sense of sight,
smell, hearing and touch give you information, you can almost instantly
judge what action to take if you hear your smoke alarm.


Specyfikacje produktu

Marka: Kidde
Kategoria: detektor gazu
Model: KN-COU-B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kidde KN-COU-B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje detektor gazu Kidde

Kidde

Kidde C3010D-CA Instrukcja

10 Stycznia 2025
Kidde

Kidde 900-0280CA Instrukcja

9 Października 2024
Kidde

Kidde 900-0263CO-CA Instrukcja

9 Października 2024
Kidde

Kidde KN-COPP-3 Instrukcja

17 Września 2024
Kidde

Kidde KN-COEG-3 Instrukcja

5 Września 2024
Kidde

Kidde C3010 Instrukcja

1 Września 2024
Kidde

Kidde KN-COB-IC Instrukcja

30 Sierpnia 2024

Instrukcje detektor gazu

Najnowsze instrukcje dla detektor gazu

Joy-It

Joy-It SEN-MQ7 Instrukcja

27 Grudnia 2024
Pentatech

Pentatech GA60 Instrukcja

20 Grudnia 2024
Vimar

Vimar 16592 Instrukcja

15 Grudnia 2024
Protector

Protector C11-L Instrukcja

12 Grudnia 2024
AngelEye

AngelEye SCB10-AE-BNLR Instrukcja

7 Października 2024
AngelEye

AngelEye SC05-AE-CE Instrukcja

7 Października 2024
GEV

GEV FMG 3637 Instrukcja

2 Października 2024
GEV

GEV FMG 3255 Instrukcja

2 Października 2024