Instrukcja obsługi Kidde KN-COPP-3

Kidde detektor gazu KN-COPP-3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kidde KN-COPP-3 (19 stron) w kategorii detektor gazu. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/19
Manual P/N 820-1388 Rev. C 04-21 2507-7229-03
ATTENTION: Please take a few minutes to thoroughly read this
user’s guide which should be saved for future reference and
passed on to any subsequent owner.
Carbon Monoxide Alarm
User’s Guide
Model: KN-COPP-3 (900-0076)
120V AC 9V Battery Backup Peak Level Memory
KN-COPP-3
with Digital Display
Carbon Monoxide Alarm Procedure
1) Operate the Test/Reset button;
2) Call your emergency services (Fire Department or 911);
3) Immediately move to fresh air - outdoors or by an open
door/window. Do a head count to check that all persons are
accounted for. Do not reenter the premises nor move away
from the open door/window until the emergency services
responders have arrived, the premises have been aired out, and
your alarm remains in its normal condition.
4) After following steps 1-3, if the alarm reactivates within a 24
hour period, repeat steps 1-3 and call a qualified appliance
technician to investigate sources of CO from fuel burning
equipment and appliances, and to inspect for proper operation
of equipment.
If problems are identified during this inspection, have the equip-
ment serviced immediately. Note any combustion equipment not
inspected by the technician and consult the manufacturer’s instruc-
tions, or contact the manufacturer’s directly for more information
about CO safety and the equipment. Make sure that motor vehicles
are not, or have not been, operating in a garage attached or adja-
cent to the residence.
Never restart the source of a CO problem until it has been
corrected. Never ignore the sound of the alarm!
If the alarm is sounding, pressing the test/reset button will
terminate the alarm. If the CO condition that caused the alert
in the first place continues, the alarm will reactivate. If the
unit alarms again within six minutes, it is sensing high levels
of CO which can quickly become a dangerous situation.
WARNING:
Activation of the CO
Alarm indicates the presence of Carbon
Monoxide (CO) which can kill you.
PHONE NUMBER:
PHONE NUMBER:
What to do When the Alarm Sounds!
Welcome
Note: Many times throughout this Users Guide, we will refer to
Carbon Monoxide as “CO”.
This Kidde carbon monoxide (CO) alarm is an important part of your
family’s home safety plan. This alarm has been designed and tested to
detect CO buildup in a residential environment. Your alarm is for use
specifically in the home. As an owner of a CO alarm, there are some
basic facts you should know about for your protection.
Many people think that CO alarms operate like smoke alarms. Like
smoke alarms, CO alarms monitor the air in your home and sound a
loud alarm to warn you of trouble. The way you respond to a CO alarm
is quite different than a smoke alarm. That’s because a house fire and a
CO problem are two distinctly different situations. If your smoke alarm
were to alarm, you would quickly be able to judge the level of danger
you were in with your senses. You can see and smell the smoke, feel the
heat, see, and possibly hear the fire burning. You can also readily see if
your smoke alarm is alarming in a non-emergency situation. Because
your sense of sight, smell, hearing and touch give you information, you
can almost instantly judge what action to take if you hear your smoke
alarm.
CO is an invisible, odorless, tasteless and non-irritating gas – completely
undetectable to your senses. That’s why it is important to your safety
that you have a CO alarm.
Important Warning Statements
IMPORTANT: This carbon monoxide alarm is designed to detect
carbon monoxide from ANY source of combustion. It is NOT
designed to detect smoke, fire, or any other gas.
WARNING: Carbon monoxide alarms are not smoke alarms.
This carbon monoxide alarm is not a substitute for installing and
maintaining an appropriate number of smoke alarms in your
home.
This carbon monoxide alarm will not sense smoke, fire, or any
poisonous gas other than carbon monoxide even though carbon
monoxide can be generated by fire. For this reason you must
install smoke alarms to provide early warning of fire and to pro-
tect you and your family from fire and its related hazards.
CAUTION: This alarm will only indicate the presence of carbon
monoxide at the sensor. Carbon monoxide may be present in
other areas.
!


Specyfikacje produktu

Marka: Kidde
Kategoria: detektor gazu
Model: KN-COPP-3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kidde KN-COPP-3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje detektor gazu Kidde

Kidde

Kidde 900-0280CA Instrukcja

9 Października 2024
Kidde

Kidde 900-0263CO-CA Instrukcja

9 Października 2024
Kidde

Kidde KN-COPP-3 Instrukcja

17 Września 2024
Kidde

Kidde KN-COEG-3 Instrukcja

5 Września 2024
Kidde

Kidde KN-COB-LP2 Instrukcja

22 Sierpnia 2024

Instrukcje detektor gazu

Najnowsze instrukcje dla detektor gazu

AngelEye

AngelEye SCB10-AE-BNLR Instrukcja

7 Października 2024
AngelEye

AngelEye SC05-AE-CE Instrukcja

7 Października 2024
GEV

GEV FMG 3637 Instrukcja

2 Października 2024
GEV

GEV FMG 3255 Instrukcja

2 Października 2024
GEV

GEV FMG 3385 Instrukcja

2 Października 2024
Figaro

Figaro TGS-822 Instrukcja

2 Października 2024
Gewiss

Gewiss GW21867 Instrukcja

1 Października 2024
Gewiss

Gewiss GW21868 Instrukcja

1 Października 2024
Gewiss

Gewiss GW20868 Instrukcja

1 Października 2024
Gewiss

Gewiss GW14711 Instrukcja

1 Października 2024