Instrukcja obsługi Kicker L7R152

Kicker subwoofer L7R152

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kicker L7R152 (9 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/9
L7R10 | L7R12 | L7R15
Manual del Propietario | Español
ALTAVOZ PARA SONIDOS GRAVES
Benutzerhandbuch | Deutsch
TIEFTÖNER
Manuel d’utilisation | Française
HAUT-PARLEUR D’EXTRÊMES GRAVES
L7R
SUBWOOFERS
Owner’s Manual
2
SPECIFICATIONS
WIRING
L7R subwoofers are available with dual 2(ohm) or dual 4voice coils. Both coils must be connected to
a source of amplifi cation. The dual 2 woofer will generate a 1 load if the coils are wired in parallel or a
4 load in series. The dual 4woofer will provide a 2load wired in parallel or 8 load wired in series.
The terminals with the white dots are for the fi rst voice coil. The terminals with solid-red and solid-black
markings are for the second voice coil. See Figure 1.
L7R SUBWOOFER
OWNER’S MANUAL
Authorized KICKER Dealer:
Purchase Date:
Speaker Model Number:
Speaker Serial Number:
Model L7R10 L7R12 L7R15
Rated Impedance [Ω] 2 or 4 2 or 4 2 or 4
Fs [Hz] 33.6 30.1 22.5
Continuous Power Handling [Watts RMS] 500 600 900
Sensitivity [1W, 1m] 85.9 86.7 88.05
Xmax (Linear Excursion) [mm] 13.9 13.9 16.4
Re [Ω] 6.79 7.52 7.43
Qms 10.046 10.292 9.846
Qes 0.559 0.666 0.598
Qts 0.53 0.625 .564
Vas [ft³, L] 1.09, 30.87 2.37, 67.4 6.875, 194.7
Outer Frame Dimension [in, cm] 10 11/16, 27.2 12 9/16, 32 15 5/8, 39.6
Mounting Cutout [in, cm] 9 5/16, 23.7 11 1/16, 28.1 13 3/4, 34.9
Mounting Depth [in, cm] 6 1/8, 15.7 6 7/8, 17.4 8 3/8, 21.5
Frequency Response [Hz] 25–100 25–100 20–100
L7R10 / L7R12 / L7R15Models:
Note: All specifi cations and performance fi gures are subject to change. Please visit www.kicker.com for the most
current information. To get the best performance from your new KICKER Subwoofer, we recommend using genuine KICKER
Accessories and Wiring. Please allow two weeks of break-in time for the subwoofer to reach optimum performance.
WARNING: KICKER products are capable of producing sound levels that can permanently damage your hearing! Turning
up a system to a level that has audible distortion is more damaging to your ears than listening to an undistorted system at
the same volume level. The threshold of pain is always an indicator that the sound level is too loud and may permanently
damage your hearing. Please use common sense when controlling volume.
Sound Check: Poor bass response? Check the system phasing by reversing the positive and negative
speaker connections on the subwoofer. If the bass improves, then the subwoofer was out of phase in
reference to the rest of the audio system.
3
BOX BUILDING NOTES
Use 3/4” (1.9cm) or thicker MDF (medium density fi berboard) and seal the joints with silicone. Use the
“template” inside your L7R’s shipping carton to mark the mounting hole, then cut directly on the line.
These designs need internal bracing. Add triangular bracing between each of the larger unsupported
panels. See Figure 3.
All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the vented
enclosures the displacement of the port must be calculated and added to the internal volume of the fi nal
design. Use the outer dimensions of the port and multiply “X x Y x Z”, convert to cubic feet, for example
the L7R12 vented Minimum design’s external port dimensions are, using 3/4” (1.9cm) MDF: [ (13.25” +
1.5” total MDF wall thickness) x (2.5” + 1.5” total MDF wall thickness) x 22.5”] x (1 ft3 / 1728 in3 ) = .77
ft3, and add this number to the internal volume of the enclosure, L7R12’s 1.75 ft3 + .77 ft3 = 2.52 ft3. See
Figure 4. Due to the necessary length of these ports, you may want to fold the port along the bottom and
back walls. It will be impractical to use round ports for these designs.
Figure 1 Series Wiring
Parallel Wiring
Figure 2
Cutout Dimensions
Dual 2Ω Voice Coils = 4Ω Load
Dual 4Ω Voice Coils = 8Ω Load
Dual 2Ω Voice Coils = 1Ω Load
Dual 4Ω Voice Coils = 2Ω Load
L7R10
L7R12
L7R15
13 3/4”
(34.9 cm)
11 1/16”
(28.1 cm)
9 5/16”
(23.7 cm)
13 3/4”
(34.9 cm)
11 1/16”
(28.1 cm)
9 5/16”
(23.7 cm)
Corner Radius:
L7R10 - 1-9/16” (3.9cm)
L7R12 - 1-13/16” (4.6cm)
L7R15 - 2” (5.1cm)
coil 1+
coil 2+
to amplifi er +
to amplifi er -
coil 2-
coil 1-
coil 1+
coil 2+
to amplifi er +
to amplifi er -
coil 2-
coil 1-

Specyfikacje produktu

Marka: Kicker
Kategoria: subwoofer
Model: L7R152

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kicker L7R152, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje subwoofer Kicker

Kicker

Kicker 51MWF104 Instrukcja

13 Stycznia 2025
Kicker

Kicker 51MWF124 Instrukcja

13 Stycznia 2025
Kicker

Kicker 48CWR154 Instrukcja

12 Stycznia 2025
Kicker

Kicker 51MWE104 Instrukcja

10 Stycznia 2025
Kicker

Kicker 51MWE124 Instrukcja

10 Stycznia 2025
Kicker

Kicker 50CVX154 Instrukcja

1 Stycznia 2025
Kicker

Kicker 50CVX124 Instrukcja

1 Stycznia 2025
Kicker

Kicker 51CWQ102 Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ122 Instrukcja

9 Października 2024
Kicker

Kicker 43C84 Instrukcja

9 Października 2024

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer

Pioneer

Pioneer TS-W257D2 Instrukcja

13 Stycznia 2025
Vonyx

Vonyx SWP15 Instrukcja

13 Stycznia 2025
Deaf Bonce

Deaf Bonce Machete MFX30D2 Instrukcja

11 Stycznia 2025
Phoenix Gold

Phoenix Gold ZP12D4 Instrukcja

9 Stycznia 2025
Phoenix Gold

Phoenix Gold ZP12D2 Instrukcja

9 Stycznia 2025
Phoenix Gold

Phoenix Gold Z12AB Instrukcja

9 Stycznia 2025
Phoenix Gold

Phoenix Gold Z10AB Instrukcja

9 Stycznia 2025
Phoenix Gold

Phoenix Gold ZB8P Instrukcja

9 Stycznia 2025
Sonance

Sonance Bandpass BPS6 Instrukcja

8 Stycznia 2025
OSD Audio

OSD Audio GLS8 Instrukcja

5 Stycznia 2025