Instrukcja obsługi Kicker KMTED

Kicker płyta grillowa KMTED

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kicker KMTED (6 stron) w kategorii płyta grillowa. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
KNI
TOWER
_
ENCLOSURES
rfKICKER
MODEL:
Authorized KICKER Dealer:
Purchase Date:
Serial Number:
KICKER
MARINE
Tower
Enclosures
Owner's
Manual
KMTES
I
KMTED
The
KICKER
KM
Tower Enclosures are the perfect way to bring your music out into the marine or power sports
environment. Whether upgrading
an
existing system or starting fresh, the
KM
Tower Enclosures are compatible
with any of the
KICKER
KM
or
KICKER
6.5 inch (165mm) speakers (KM6000 will require new mounting holes to
be drilled). The injection-molded ABS enclosures are
UV
treated, splash resistant, and weather resilient. Mount
the
KM
Tower Enclosures
in
your boat or get creative with a pair of them
in
the garage, on your 4x4 or Side-by-
Side's
roll
bars, or
in
any other bar-mounted application.
INSTALLATION
Mounting:
Your
KM
Tower enclosures include plastic adaptor inserts for use with the four most popular tower
tubing diameters : 2-1 /4", 2-3/8",
2-1
/2" and 2-5/8" (without inserts).
If
your tubing diameter
is
different, you may
need to use the KMTAP Accessory pack, which includes adaptors for 1-5/8", 1-3/4", 1-7 /8" and
2"
. For other
tubing diameters, additional shims may be needed.
Study your mounting bar for the best possible mounting locations. Spreading the
KM
Tower Enclosures apart will
provide better stereo performance, and
is
usually preferable. When determining the best locations for mounting,
be careful to look for obstac or les obstructions that could
com~\licate
mounting the
KM
Tower Enclosures.
Please keep
in
mind the routing of your speaker wires as this can affect
where you finally mount your
KM
Tower
En
closures.
Aiming:
The mounting hardware design provides flexibility
in
angular mounting of your
KM
Tower Enclosures.
This
is
accomplished by using the included female -threaded internal mounting plates.
It
is
recommended that
you loosely assemble your
KM
Tower Enclosures and attach them to your mounting bar/tower to determine
proper angular alignment.
steel mounting plate
2
Start by inserting two stainless socket-head
cap
screws through the lower mounting bracket, through the
enclosure mounting holes, and into the threaded mounting plate. Leave these screws loose for the moment.
Attach the enclosure to your mounting bar using the upper mounting bracket and two more stainless socket-
head cap screws. While still loosely assembled, visually align your KM Tower Enclosures to the desired angle.
Using tape, a pencil, or some other means, mark the mounting angle of the mounting bracket bottom
in
relation
to the the KM Tower Enclosure(s). Remove enclosures and then
do
final
tightening of the lower mounting
bracket to the enclosure, aligning
it
with the marks you made. Once your final adjustments are made do not use
excessive force to further aim the enclosures.
If
your aim
is
off, remove the
KM
Tower Enclosures and loosen the
screws between the enclosure and the the lower mounting bracket, then reset angle .
Loosely fill the enclosure with poly-fil, the
white protective layer
in
the packaging.
The KMTED will use one full sheet,
whereas the KMTES will use one sheet for
a woofer and one-half sheet for a horn.
mount speaker to
en<?losure
(recommend
M4
or #8 screws)
remove inner screws
from back of enclosure to
orient back plate.
stainless steel socket-
head cap screws ( 1
I
4"
Allen wrench)
upper mounting bracket
lower mounting bracket
(set desired angle before
completing mounting)
attach wiring to outer
terminals
attach soldered wiring from inner
terminals to speaker terminals, keeping
in
mind the polarity of each.
•
•
K(}~
•
3

Specyfikacje produktu

Marka: Kicker
Kategoria: płyta grillowa
Model: KMTED

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kicker KMTED, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje płyta grillowa Kicker

Kicker

Kicker KMG10 Instrukcja

30 Sierpnia 2024
Kicker

Kicker KMTES8 Instrukcja

13 Sierpnia 2024
Kicker

Kicker KMTED Instrukcja

6 Lipca 2024

Instrukcje płyta grillowa

Najnowsze instrukcje dla płyta grillowa

TriStar

TriStar PD-8766AH Instrukcja

14 Października 2024
Coyote

Coyote C1C28-FS Instrukcja

9 Października 2024
Coyote

Coyote C2C36 Instrukcja

9 Października 2024
Coyote

Coyote C1C28 Instrukcja

9 Października 2024
Taco Tuesday

Taco Tuesday TTFGR20RD Instrukcja

9 Października 2024
Ufesa

Ufesa BB7640 Instrukcja

9 Października 2024
Ufesa

Ufesa BB7650 Instrukcja

9 Października 2024
Ufesa

Ufesa PR2000 Instrukcja

9 Października 2024
Ufesa

Ufesa Aspen Instrukcja

9 Października 2024
Ufesa

Ufesa Teide Instrukcja

9 Października 2024