Instrukcja obsługi Kenwood KDC-BT645U

Kenwood Odtwarzacze/nagrywarki CD KDC-BT645U

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kenwood KDC-BT645U (128 stron) w kategorii Odtwarzacze/nagrywarki CD. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/128

US Residents Only

KDC-BT645U

KDC-HD545U

CD-RECEIVER

INSTRUCTION MANUAL

AMPLI-TUNER LECTEUR DE CD

MODE D’EMPLOI

REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM

MANUAL DE INSTRUCCIONES

Take the time to read through this instruction manual.

Familiarity with installation and operation procedures will help you obtain the best

performance from your new CD-receiver.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the

warranty card, and in the space provided below. Refer to the model and serial numbers

whenever you call upon your Kenwood dealer for information or service on the product.

Model KDC-BT645U/ KDC-HD545U Serial number

2 | KDC-BT645U/ KDC-HD545U

Contents

Before Use 3

Component names and functions 4

General operation 5

Before Using

Common Operation

Function Setting Operation

Music Disc/Audio File/iPod Operation 6

Basic Operation

Play function

All Random

Music Search

Music Search for iPod

Alphabet Search

My Playlist for iPod

Audio File/ iPod Setting

iPod Control by Hand Mode

Direct Music Search

Basic Operation of Disc Changer (Optional Accessory)

Direct Disc Search

Tuner Operation 10

Basic Operation

Station Preset Memory

Tuner Setting

Direct Access Tuning

HD RadioTM Tuner Operation 12

Basic Operation

Station Preset Memory

HD RadioTM Setting

Direct Access Tuning

iTunes Tagging

Operation of Hands-Free Phoning 14

Connecting a Bluetooth Device

Making a Call

Calling a Number in the Phone Book

Calling a Number in the Call Log

Dial a Number

Make a Voice Dialing Call

Registering to the Preset Dial Number (Preset Memory)

Speed Dialing (Preset Dial)

Receiving a Call

During a Call

Call Waiting

Other Functions

Display of Phone Number Type (Category)

Audio Adjustments 17

Audio Control

Display Settings 18

Display Selection

Text Scroll

Display Setting

Auxiliary Input Display Setting

Other Functions 20

Clock Adjustment

Demonstration Mode Setting

Initial Setting

Removing the Faceplate

How to Reset Your Unit

Muting Volume Upon Reception of Phone Call

Bluetooth Setup 22

Bluetooth Setup

Registering Bluetooth Device (Pairing)

Deleting a Registered Bluetooth Device

Registering PIN Code

Displaying the Firmware Version

Downloading the Phone Book

Selecting the Bluetooth Device You Wish to Connect

Downloading the SMS

SMS (Short Message Service)

Adding a Voice Dialing Command

Setting a Voice Command for Category

Satellite Radio Tuner Control

(Optional Accessory) 28

Basic Operation

Preset Memory

Satellite Radio Setting

Category and Channel Search

Channel Scan

Direct Access Tuning

Basic Operations of Remote Control 30

Appendix 32

Accessories/ Installation Procedure 35

Connecting Wires to Terminals 36

Installation/Removing the Unit 37

Troubleshooting Guide 38

Specifications 42

English | 3

Before Use

2WARNING

To prevent injury or fire, take the following

precautions:

To prevent a short circuit, never put or leave any

metallic objects (such as coins or metal tools) inside

the unit.

Before using this unit for the first time

This unit is initially set on the Demonstration mode.

When using this unit for the first time, cancel

the Demonstration mode. Refer to <Exit of the

Demonstration Mode> (page 5).

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a

dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain off with

a cloth moistened with neutral cleaner, then wipe it

again with a clean soft dry cloth.

Applying spray cleaner directly to the unit may affect its

mechanical parts. Wiping the faceplate with a hard cloth or

using a volatile liquid such as thinner or alcohol may scratch

the surface or erases characters.

About the Terminals of the Unit and

Faceplate

• To prevent deterioration, do not touch the terminals of the

unit and faceplate with your fingers.

• If the terminals on the unit or faceplate get dirty, wipe them

with a clean soft dry cloth.

Lens Fogging

When you turn on the car heater in cold weather,

dew or condensation may form on the lens in the

CD player of the unit. Called lens fogging, this

condensation on the lens may not allow CDs to play.

In such a situation, remove the disc and wait for the

condensation to evaporate. If the unit still does not

operate normally after a while, consult your Kenwood

dealer.

Notes

• If you experience problems during installation,

consult your Kenwood dealer.

• When you purchase optional accessories, check with

your Kenwood dealer to make sure that they work

with your model and in your area.

• The characters which can be displayed by this unit

are A-Z 0-9 @ “ ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; ^ - { } |

~ .

• The illustrations of the display and the panel

appearing in this manual are examples used to

explain more clearly how the controls are used.

Therefore, what appears on the display in the

illustrations may differ from what appears on the

display on the actual equipment, and some of the

illustrations on the display may be inapplicable.

Handling CDs

• Do not touch the recording surface of the CD.

• Do not stick tape etc. on the CD, or use a CD with

tape stuck on it.

• Do not use disc type accessories.

• Clean from the center of the disc and move

outward.

• When removing CDs from this unit, pull them out

horizontally.

• If the CD center hole or outside rim has burrs,

use the CD only after removing the burrs with a

ballpoint pen etc.

CDs that cannot be used

• CDs that are not round cannot be used.

• CDs with coloring on the recording surface or CDs

that are dirty cannot be used.

• This unit can only play the CDs with .

This unit may not correctly play discs which do not

have the mark.

• You cannot play a CD-R or CD-RW that has not

been finalized. (For the finalization process refer to

your CD-R/CD-RW writing software, and your CD-R/

CD-RW recorder instruction manual.)

• 3 inch CD cannot be used. Attempt to insert using

an adapter can cause malfunction.

Specyfikacje produktu

Marka:	Kenwood
Kategoria:	Odtwarzacze/nagrywarki CD
Model:	KDC-BT645U
Kolor produktu:	Black,Red
Typ produktu:	Śrubokręt
Źródło zasilania:	Bateria
Szerokość produktu:	980 mm
Szerokość opakowania:	347 mm
Wysokość opakowania:	335 mm
Głębokość opakowania:	111 mm
Waga wraz z opakowaniem:	2800 g
Napięcie baterii:	18 V
Prędkość biegu jałowego (max):	4000 RPM
Wbudowane światło:	Tak
Średnica śrub (max):	- mm
Kształt uchwytu:	Uchwyt pistoletowy