Instrukcja obsługi Kaco blueplanet 4.0 TL3

Kaco klimatyzacja blueplanet 4.0 TL3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kaco blueplanet 4.0 TL3 (88 stron) w kategorii klimatyzacja. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/88
Manual
nEnglish translation of German original
KACO blueplanet 3.0TL3
KACO blueplanet 4.0TL3
KACO blueplanet 5.0TL3
KACO blueplanet 6.5TL3
KACO blueplanet 7.5 TL3
KACO blueplanet 8.6TL3
KACO blueplanet 9.0TL3
KACO blueplanet 10.0TL3
These instructions form part of the product and must be carefully read, observed and stored in a place which is freely accessible at all
times.
Authorised electrician
Important safety instructions
Legal provisions
The information contained in this document is the property of KACO new energy GmbH. Publication, in whole or in part,
requires the written permission of KACO new energy GmbH.
KACO warranty
For current warranty conditions contact your system integrator. http://www.kaco-newenergy.com
Definitions on product designations
In these operating instructions, the product "Photovoltaic feed-in inverter" is referred to as "device" for ease of reading.
Trademarks
All trademarks are recognised, even if not explicitly identified as such. A lack of identification does not mean that a
product or designation/logo is free of trademarks.
KACO blueplanet 3.0TL3 KACO blueplanet 4.0TL3 KACO blueplanet 5.0TL3 KACO blueplanet 6.5TL3 KACO
blueplanet 7.5 TL3 KACO blueplanet 8.6TL3 KACO blueplanet 9.0TL3 KACO blueplanet 10.0TL3
Page 2
EN
Contents
1 General information........................................................ 4
1.1 About this document................................................. 4
1.2 More information ...................................................... 4
1.3 Layout of Instructions................................................ 5
1.4 Identification ............................................................. 6
1.5 Warnings on the device............................................. 6
1.6 Target group.............................................................. 6
2 Safety.............................................................................. 7
2.1 Proper use ................................................................. 7
2.2 Protection features.................................................... 8
3 Description of the device................................................. 9
3.1 Mode of operation .................................................... 9
3.2 Device diagram.......................................................... 9
3.3 System layout .......................................................... 11
4 Technical data ............................................................... 12
4.1 Electrical data .......................................................... 12
4.2 General Data............................................................ 13
4.3 Environmental data ................................................. 14
5 Transportation and Delivery.......................................... 15
5.1 Scope of delivery ..................................................... 15
5.2 Transporting the device........................................... 15
5.3 Installation tool ....................................................... 15
6 Assembly and preparation ............................................ 16
6.1 Choosing the installation location ........................... 16
6.2 Unpacking the device .............................................. 17
6.3 Fastening the mount ............................................... 18
6.4 Installing and securing the device ........................... 19
7 Installation.................................................................... 21
7.1 General information ................................................ 21
7.2 Surveying the connection area................................ 21
7.3 Making the electrical connection ............................ 21
7.4 Connecting the device to the power grid ................ 22
7.5 Connect PV generator to device.............................. 24
7.6 Creating equipotential bonding............................... 27
7.7 Connecting the interfaces ....................................... 28
7.8 Sealing the connection area .................................... 31
8 Commissioning.............................................................. 32
8.1 Requirements .......................................................... 32
8.2 Preconditions relating to standards ........................ 32
9 Configuration and operation ......................................... 33
9.1 Initial start-up.......................................................... 33
9.2 Controls.....................................................................33
9.3 User interface ...........................................................35
9.4 Menu structure.........................................................36
9.5 Monitoring the device ..............................................51
9.6 Performing a firmware update .................................53
9.7 Access via Modbus....................................................54
10 Specifications .................................................................55
10.1 Reactive power control.............................................55
10.2 Active power regulation............................................58
10.3 FRT ............................................................................64
10.4 Other grid-supporting functions that are effective in
the case of active power...........................................67
10.5 Advanced islanding detection...................................68
11 Maintenance and troubleshooting .................................70
11.1 Visual inspection .......................................................70
11.2 Cleaning ....................................................................70
11.3 Replacing the fan ......................................................71
11.4 Shutting down for maintenance / troubleshooting .......
72
11.5 Disconnecting connections .......................................72
11.6 Faults.........................................................................73
11.7 Fault messages..........................................................74
11.8 Troubleshooting........................................................75
12 Decommissioning and dismantling .................................81
12.1 Switching off the device............................................81
12.2 Uninstalling the device..............................................81
12.3 Disassembling the device..........................................82
12.4 Packaging the device.................................................82
12.5 Storing the device .....................................................82
13 Disposal .........................................................................83
14 Service and warranty......................................................84
15 Appendix........................................................................85
15.1 EU Declaration of Conformity...................................85
iii
Manual
Photovoltaic feed-in inverter
EN
1.4 Identification
You will find the name plate with the following data for service and other require-
ments specific to installation on the right side panel of the product:
Product name
Part no.
Serial number
Date of manufacture
Technical data
Disposal information
Certification marking, CE marking.
KACO new energy
Carl-Zeiss-Straße1
74172 Neckarsulm
Made in Germany
KACO blueplanet 10.0 TL3 M2 WM OD IIG0
Part number 1001460
Serial number 00000000012345678 Year Q3 / 19
Input Vmax PV / lsc PV (max) / Inom PV 1000 Vdc /2x 16 A /2x 11 A
V-MPP at Pnom / V- range 470 V - 800 V / 200 V - 950 V
Output
Nominal voltage
220 V / 380 V (3/N/PE)
230 V / 400 V (3/N/PE)
240 V / 415 V (3/N/PE)
Voltage range continuous operation 180 V - 277 V (Ph-N)
Current (maximum continuous) 3 x 15,5 A
Frequency range 45 Hz - 65 Hz
Output
Power
Snom at 230 V Unom 10000 VA
Reactive power cos phi 0-95 % Snom 1 - 0,3 ind/cap
Environ-
ment Temperature range -2C...+60°C/-13°F...+140°F
Protection class / Ingress protection I / IP65
ARC fault circuit prot ection none
Interface prot ection according to country
specific requirements, det ails see manual
No galvanic separation / UTILITY-INTERCONNECTED
Fig.1: Name plate
1.5 Warnings on the device
A warning sticker is affixed to the device. Read the warnings carefully.
Do not remove the sticker. If the sticker is missing or is illegible, please contact a
KACO representative or distributor.
Article number:
Fig.2: Warning sticker
1.6 Target group
All activities described in the document may only be carried out by specially trained personnel with the following qualific-
ations:
Knowledge about how an inverter functions and operates
Knowledge about IP-based network protocols
Knowledge of the Modbus specifications
Knowledge of the SunSpec Modbus specifications
Education concerning the installation and configuration of IT systems
Training in the handling of hazards and risks during the installation and operation of electrical devices and systems.
Education concerning the installation and start-up of electrical devices and systems.
Knowledge of applicable standards and directives.
Knowledge and adherence to this document with all safety notices.
KACO blueplanet 3.0TL3 KACO blueplanet 4.0TL3 KACO blueplanet 5.0TL3 KACO blueplanet 6.5TL3 KACO
blueplanet 7.5 TL3 KACO blueplanet 8.6TL3 KACO blueplanet 9.0TL3 KACO blueplanet 10.0TL3
Page 6
EN


Specyfikacje produktu

Marka: Kaco
Kategoria: klimatyzacja
Model: blueplanet 4.0 TL3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kaco blueplanet 4.0 TL3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje klimatyzacja Kaco

Instrukcje klimatyzacja

Najnowsze instrukcje dla klimatyzacja