Instrukcja obsługi Kaco blueplanet 10.0 TL3

Kaco klimatyzacja blueplanet 10.0 TL3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kaco blueplanet 10.0 TL3 (88 stron) w kategorii klimatyzacja. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/88
Manual
nEnglish translation of German original
KACO blueplanet 3.0TL3
KACO blueplanet 4.0TL3
KACO blueplanet 5.0TL3
KACO blueplanet 6.5TL3
KACO blueplanet 7.5 TL3
KACO blueplanet 8.6TL3
KACO blueplanet 9.0TL3
KACO blueplanet 10.0TL3
These instructions form part of the product and must be carefully read, observed and stored in a place which is freely accessible at all
times.
Authorised electrician
Important safety instructions
Legal provisions
The information contained in this document is the property of KACO new energy GmbH. Publication, in whole or in part,
requires the written permission of KACO new energy GmbH.
KACO warranty
For current warranty conditions contact your system integrator. http://www.kaco-newenergy.com
Definitions on product designations
In these operating instructions, the product "Photovoltaic feed-in inverter" is referred to as "device" for ease of reading.
Trademarks
All trademarks are recognised, even if not explicitly identified as such. A lack of identification does not mean that a
product or designation/logo is free of trademarks.
KACO blueplanet 3.0TL3 KACO blueplanet 4.0TL3 KACO blueplanet 5.0TL3 KACO blueplanet 6.5TL3 KACO
blueplanet 7.5 TL3 KACO blueplanet 8.6TL3 KACO blueplanet 9.0TL3 KACO blueplanet 10.0TL3
Page 2
EN
Contents
1 General information........................................................ 4
1.1 About this document................................................. 4
1.2 More information ...................................................... 4
1.3 Layout of Instructions................................................ 5
1.4 Identification ............................................................. 6
1.5 Warnings on the device............................................. 6
1.6 Target group.............................................................. 6
2 Safety.............................................................................. 7
2.1 Proper use ................................................................. 7
2.2 Protection features.................................................... 8
3 Description of the device................................................. 9
3.1 Mode of operation .................................................... 9
3.2 Device diagram.......................................................... 9
3.3 System layout .......................................................... 11
4 Technical data ............................................................... 12
4.1 Electrical data .......................................................... 12
4.2 General Data............................................................ 13
4.3 Environmental data ................................................. 14
5 Transportation and Delivery.......................................... 15
5.1 Scope of delivery ..................................................... 15
5.2 Transporting the device........................................... 15
5.3 Installation tool ....................................................... 15
6 Assembly and preparation ............................................ 16
6.1 Choosing the installation location ........................... 16
6.2 Unpacking the device .............................................. 17
6.3 Fastening the mount ............................................... 18
6.4 Installing and securing the device ........................... 19
7 Installation.................................................................... 21
7.1 General information ................................................ 21
7.2 Surveying the connection area................................ 21
7.3 Making the electrical connection ............................ 21
7.4 Connecting the device to the power grid ................ 22
7.5 Connect PV generator to device.............................. 24
7.6 Creating equipotential bonding............................... 27
7.7 Connecting the interfaces ....................................... 28
7.8 Sealing the connection area .................................... 31
8 Commissioning.............................................................. 32
8.1 Requirements .......................................................... 32
8.2 Preconditions relating to standards ........................ 32
9 Configuration and operation ......................................... 33
9.1 Initial start-up.......................................................... 33
9.2 Controls.....................................................................33
9.3 User interface ...........................................................35
9.4 Menu structure.........................................................36
9.5 Monitoring the device ..............................................51
9.6 Performing a firmware update .................................53
9.7 Access via Modbus....................................................54
10 Specifications .................................................................55
10.1 Reactive power control.............................................55
10.2 Active power regulation............................................58
10.3 FRT ............................................................................64
10.4 Other grid-supporting functions that are effective in
the case of active power...........................................67
10.5 Advanced islanding detection...................................68
11 Maintenance and troubleshooting .................................70
11.1 Visual inspection .......................................................70
11.2 Cleaning ....................................................................70
11.3 Replacing the fan ......................................................71
11.4 Shutting down for maintenance / troubleshooting .......
72
11.5 Disconnecting connections .......................................72
11.6 Faults.........................................................................73
11.7 Fault messages..........................................................74
11.8 Troubleshooting........................................................75
12 Decommissioning and dismantling .................................81
12.1 Switching off the device............................................81
12.2 Uninstalling the device..............................................81
12.3 Disassembling the device..........................................82
12.4 Packaging the device.................................................82
12.5 Storing the device .....................................................82
13 Disposal .........................................................................83
14 Service and warranty......................................................84
15 Appendix........................................................................85
15.1 EU Declaration of Conformity...................................85
iii
Manual
Photovoltaic feed-in inverter
EN


Specyfikacje produktu

Marka: Kaco
Kategoria: klimatyzacja
Model: blueplanet 10.0 TL3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kaco blueplanet 10.0 TL3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje klimatyzacja Kaco

Instrukcje klimatyzacja

Najnowsze instrukcje dla klimatyzacja

LG

LG HS-H076QPA0 Instrukcja

15 Października 2024
Klarstein

Klarstein Vita Pure 2G Instrukcja

15 Października 2024
Gree

Gree ETAC-15HP265V20B Instrukcja

15 Października 2024
Qlima

Qlima P 126 Instrukcja

14 Października 2024
Mitsubishi

Mitsubishi MSZ-CB22VA Instrukcja

14 Października 2024
Suntec

Suntec Motion 90+ Instrukcja

14 Października 2024
Danby

Danby DTAC120B1WDB Instrukcja

14 Października 2024
Amana

Amana PTC093K35AXXX Instrukcja

14 Października 2024
Amana

Amana AMAP121AB-2 Instrukcja

14 Października 2024