Instrukcja obsługi JVC CW-DRA8

JVC subwoofer CW-DRA8

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JVC CW-DRA8 (81 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/81
CW-DRA8
ACTIVE SUBWOOFER SYSTEM
INSTRUCTION MANUAL
SYSTÈME DE CAISSON DE GRAVE ACTIF
MODE D'EMPLOI
AKTIVES SUBWOOFER-SYSTEM
BEDIENUNGSANLEITUNG
ACTIEVE SUBWOOFER SYSTEEM
GEBRUIKSAANWIJZING
SISTEMA SUBWOOFER ATTIVO
ISTRUZIONI PER L’USO
SISTEMA DE SUBWOOFER ACTIVO
MANUAL DE INSTRUCCIONES
SISTEMA DE SUBWOOFER ATIVO
MANUAL DE INSTRUÇÕES
АКТИВНАЯ САБВУФЕРНАЯ СИСТЕМА
ИHCTPУKCИЯ ПO ЭKCПЛУATAЦИИ
АКТИВНА НИЗЬКОЧАСТОТНА АКУСТИЧНА СИСТЕМА
ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ
© B5A-2451-00/00 (W)
English
Français
Deutsch
Nederlands
Italiano
Español
Português
Русский
Українська
2 English
IMPORTANT SAFETY INSTRUCTIONS
Caution: Read this page carefully to ensure safe operation.
WA
WA
WA
WARNI
RNI
RNI
RNING
NG
NG
NG
WARNING
• Before mounting or wiring etc., be sure to remove the
wire from the battery minus terminal.
(Not doing so can cause shorts or fires.)
• When extending the ignition, battery, or ground wires,
make sure to use automotive-grade wires or other wires
with a 0.75 mm2 (AWG 18) or more to prevent wire deteri-
oration and damage to the wore coating.
• To prevent a short circuit, never put or leave any metallic
objects (such as coins or metal tools) inside the speaker.
• In the event the unit generates smoke or abnormal smell,
immediately switch the power OFF. After this, please
contact your dealer or nearest service station as soon as
possible.
POWER OFF!
• Connect the speaker to DC 12 V, negative ground.
• Do not attempt to open or modify the unit, for this could
cause fire hazard or malfunction.
• After taking the unit out of the polyethylene bag, be sure
to dispose of the polyethylene bag out of the reach of
children. Otherwise, they may play with the bag, which
could cause hazard of suffocation.
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
• Installation and wiring of the product requires expert skill
and experience. To ensure safety, be sure to have your
dealer or specialist perform the installation and wiring.
• Do not install the speaker in a spot exposed to direct
sunlight or excessive heat or humidity.
• Do not install the speakers in locations which may be
subject to water or moisture.
• Do not install the speakers in unstable locations or loca-
tions subject to dust.
• If the fuse blows, after checking to see if the wiring cord
has shorted, be sure to replace with the stipulated size
(amperage) fuse as displayed on the fuse box.
(Using fuses other than the stipulated size can cause fires.)
Check the display!
To replace the fuse, refer to the vehicle instruction manual.
• To prevent a short circuit when replacing a fuse, discon-
nect the wiring harness at first.
• Do not use gasoline, naphtha, or any type of solvent to
clean the speaker. Clean by wiping with a soft, dry cloth.
• Connect the speaker wires to appropriate speaker
connectors separately. Sharing the negative wire of the
speaker or grounding speaker wires to the metal body of
the car can cause this unit to fail.
• When making a hole under a seat, inside the trunk, or
somewhere else in the vehicle, check that there is noth-
ing hazardous on the opposite side such as a gasoline
tank, brake pipe; or wiring harness, and be careful not to
cause scratches or other damage.
• For ground wire mounting, do not fasten the wire to an
airbag, steering or brake line system or other critical safety
unit bolts or nut.
(Can cause accidents.)
• When mounting, be sure to mount in a place that will
not interfere with driving or be dangerous to passengers
during sudden braking etc.
(Cause of injury or accidents.)
• After installing the unit, check to make sure that electrical
equipment such as the brake lamps, turn signal lamps
and windshield wipers operate normally.
• The driver should always stop the vehicle in a safe place
Information on Disposal of Old Electrical and Elec-
tronic Equipment (applicable for countries that
have adopted separate waste collection systems)
Products with the symbol (crossed-out
wheeled bin) cannot be disposed as house-
hold waste. Old electrical and electronic equip-
ment should be recycled at a facility capable of
handling these items and their waste by prod-
ucts.
Contact your local authority for details in locating a recy-
cle facility nearest to you. Proper recycling and waste
disposal will help conserve resources whilst preventing
detrimental effects on our health and the environment.
before performing the following action.
– Remote control operation
• Do not use the product for purposes other than on-board
mounting.
• Keep the volume of sound at an optimum level. Not be-
ing able to hear sounds from outside of your car can lead
to traffic accidents.
Declaration of Conformity with regard
to the EMC Directive 2014/30/EU
Declaration of Conformity with regard
to the RoHS Directive 2011/65/EU
Manufacturer:
JVC KENWOOD Corporation
3-12 Moriya-cho, Kanagawa-ku, Yokohama-shi,
Kanagawa, 221-0022, JAPAN
EU Representative:
JVCKENWOOD Deutschland GmbH
Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel,
GERMANY
For U.S.A.
FCC WARNING
This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user
could lose the authority to operate this equipment if an
unauthorized change or modification is made.
FCC NOTE
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference
in a residential installation. This equipment may cause
harmful interference to radio communications, if it is not
installed and used in accordance with the instructions.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV techni-
cian for help.
English 3
Parts
Caution:
Before wiring, be sure to remove the wire from the negative terminal of the battery. After completing all wiring, check the
correct wirings again. After checking, connect the wire from the negative terminal of the battery.
Terminals of Subwoofer
Connecting the remote control unit
Notes:
• Be sure to connect the supplied remote control unit.
• If the cord is not connected properly, the illumination on the remote control unit do not light up.
• Do not insert the remote control connector upside down or forcibly. Otherwise, malfunction may result.
Connections
No. Part Name Outside Shape Quantity No. Part Name Outside Shape Quantity
①Remote control
(5 m / 16 ft) 1⑥Tapping screw
(ø 5 × 16 mm (5/8”)) 4
②10-pin connector cord
(5 m / 16 ft) 1⑦Machine screw
(M4 × 16 mm (5/8”)) 4
③Speaker cord
(4.3 m/ 14 ft) 1⑧Tapping screw
(ø 3 × 10 mm (3/8”)) 2
④Fixture A 2
⑨
Hook-and-loop fastener
(Double-side adhesive/
for Remote control)
1
⑤Fixture B 1
POWER/SPEAKER INPUT terminal
REMOTE terminal
① Remote control
When the power turns
ON, the illumination
lights.
Lights in blue.
Connect with the lock
part of remote control
jack facing down.
Lock part

Specyfikacje produktu

Marka: JVC
Kategoria: subwoofer
Model: CW-DRA8

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JVC CW-DRA8, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje subwoofer JVC

JVC

JVC CW-DR104 Instrukcja

28 Sierpnia 2024
JVC

JVC CS-GD1210 Instrukcja

27 Sierpnia 2024
JVC

JVC CW-DRA8 Instrukcja

24 Sierpnia 2024
JVC

JVC CW-DR124 Instrukcja

20 Sierpnia 2024
JVC

JVC CS-G1210 Instrukcja

19 Sierpnia 2024
JVC

JVC TH-BY370A Instrukcja

8 Sierpnia 2024
JVC

JVC Arsenal CS-AW7040 Instrukcja

4 Lipca 2024

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer

ETON

ETON Graphit 8-2 Instrukcja

19 Marca 2025
ETON

ETON Graphit 8-4 Instrukcja

19 Marca 2025
ETON

ETON Graphit 10-4 Instrukcja

19 Marca 2025
ETON

ETON MW 10 FLAT Instrukcja

19 Marca 2025
ETON

ETON PW 8 Instrukcja

19 Marca 2025
ETON

ETON USB 6 AR Instrukcja

19 Marca 2025
Morel

Morel Ultimo Powerslim 124D Instrukcja

12 Marca 2025
Morel

Morel Ultimo Powerslim 104D Instrukcja

12 Marca 2025
Rockustics

Rockustics OneSub Instrukcja

9 Marca 2025
Phase Technology

Phase Technology PL-10s Instrukcja

5 Marca 2025