Instrukcja obsługi Juniper M10i

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Juniper M10i (22 stron) w kategorii router. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/22
M10i Multiservice Edge Router Quick Start
August 2010
Part Number: 530-036366
Revision 01
This document describes how to install the Juniper Networks M10i Multiservice Edge
Router.
Contents M10i Quick Start Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Step 1: Prepare the Site for M10i Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
M10i Rack-Mounting Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Tools Required to Unpack and Prepare the M10i Router for Installation . . . . . 5
Step 2: Install the Mounting Hardware and Cable Management System . . . . . . . . 6
Move the Mounting Brackets (Center-Mount Only) . . . . . . . . . . . . . . . . . . . . . 6
Install the Cable Management System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Step 3: Install the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Step 4: Connect the Grounding Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Step 5: Connect External Devices and PIC Cables . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connect to a Network for Out-of-Band Management . . . . . . . . . . . . . . . . . . . 10
Connect a Management Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connect the PIC Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Step 6: Connect the Power Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connect Power to a AC-Powered M10i Router . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connect Power to a DC-Powered M10i Router . . . . . . . . . . . . . . . . . . . . . . . . . 12
Power On the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Step 7: Perform Initial Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Enter Configuration Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Configure User Accounts and Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Configuring System Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Commit the Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Compliance Statements for NEBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Compliance Statements for EMC Requirements for the M10i Router . . . . . . . . . . 19
Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
European Community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
United States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Junos OS Documentation and Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
1Copyright © 2010, Juniper Networks, Inc.
Requesting Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Self-Help Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Opening a Case with JTAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Copyright © 2010, Juniper Networks, Inc.2
M10i Multiservice Edge Router Quick Start
M10i Quick Start Description
This Quick Start contains information you need to install and configure the router quickly.
For complete installation instructions, see the M10i Multiservice Edge Router Hardware
Guide at http://www.juniper.net/techpubs/.
WARNING: This Quick Start contains a summary of safety warnings in “Safety
Warnings” on page 18. For a complete list of warnings for this router, including
translations, see the M10i Multiservice Edge Router Hardware Guide at
http://www.juniper.net/techpubs/.
The router is a complete routing system that provides high-speed interfaces for medium
and largenetworks and network applications, such asthose supported by Internetservice
providers (ISPs). The router supports up to eight Physical Interface Cards (PICs). The
router height of 8.7 in. (22.1 cm) enables stacked installation of 8 M10i routers in a single
floor-to-ceiling rack, for increased port density per unit of floor space.
The router’s maximum aggregate throughput is 12. 8 gigabits per second (Gbps) simplex
or 6.4 Gbps full duplex.
The router is shipped in a cardboard carton. The shipping crate contains:
One accessory box (the box to which this Quick Start is taped)
One Juniper Networks router
One Quick Start (this document)
Step 1: Prepare the Site for M10i Installation
M10i Rack-Mounting Requirements on page 3
Tools Required to Unpack and Prepare the M10i Router for Installation on page 5
M10i Rack-Mounting Requirements
You can install the router in a four-post rack or cabinet or an open-frame rack.
A fully configured router can weigh up to 80 lb (36 kg). Up to eight M10i routers can
be stacked in a single floor-to-ceiling rack. If you do so, the rack must be capable of
supporting the combined weigh of 640 lb (288 kg).
The rack rails must be spaced widely enough to accommodate the router chassis's
external dimensions: 8.7 in. (22.1 cm) high, 18.2 in. (45.7 cm) deep, and 17.5 in. (44.5
cm) wide. The mounting brackets extend the width to fit into standard 19-in. racks.
For service personnel to remove and install hardware components, there must be
adequate space at the front and back of the rack or cabinet. At least 24 in. (61.0 cm)
both in front of and behind the rack or cabinet is required. NEBS Gr-63 recommends
at least 30 in. in front of the rack or cabinet.
The rack or cabinet must have an adequate supply of cooling air:
3Copyright © 2010, Juniper Networks, Inc.
M10i Quick Start Description

Specyfikacje produktu

Marka: Juniper
Kategoria: router
Model: M10i

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Juniper M10i, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje router Juniper

Juniper

Juniper J4300 Instrukcja

1 Października 2024
Juniper

Juniper NFX150 Instrukcja

1 Października 2024
Juniper

Juniper M10i Instrukcja

1 Października 2024
Juniper

Juniper ACX710 Instrukcja

1 Października 2024
Juniper

Juniper SRX340 Instrukcja

1 Października 2024
Juniper

Juniper MX150 Instrukcja

1 Października 2024
Juniper

Juniper SRX5600 Instrukcja

1 Października 2024

Instrukcje router

Najnowsze instrukcje dla router

Netgear

Netgear LB2120 4G LTE Instrukcja

15 Października 2024
Linksys

Linksys WRT3200ACM Instrukcja

15 Października 2024
D-Link

D-Link DAP-1360 Instrukcja

15 Października 2024
TP-Link

TP-Link Archer AXE75 Instrukcja

14 Października 2024
Linksys

Linksys EA8500 Instrukcja

13 Października 2024
Totolink

Totolink ND300 Instrukcja

12 Października 2024
ZyXEL

ZyXEL LTE 7460 Instrukcja

10 Października 2024
Netgear

Netgear Nighthawk R7200 Instrukcja

10 Października 2024
Netgear

Netgear FR114P Instrukcja

10 Października 2024
Asus

Asus RT-BE86U Instrukcja

9 Października 2024