Instrukcja obsługi JUNG A 5192 KRM TS D

JUNG inteligentny dom A 5192 KRM TS D

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JUNG A 5192 KRM TS D (7 stron) w kategorii inteligentny dom. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/7

Room controller display compact module

Art. No. : ..519.. KRMTSD

Operating instructions

1 Safety instructions

Electrical devices may only be mounted and connected by electrically skilled

persons.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Use only the enclosed plastic screws for fastening to the supporting frame! Otherwise

safe operation cannot be ensured. Electrostatic discharges can cause defects in the

device.

These instructions are an integral part of the product, and must remain with the end

customer.

2 Function

System information

This device is a product of the KNX system and complies with the KNX directives. Detailed

technical knowledge obtained in KNX training courses is a prerequisite to proper understanding.

The function of this device depends upon the software. Detailed information on loadable

software and attainable functionality as well as the software itself can be obtained from the

manufacturer´s product database. Planning, installation and commissioning of the device are

carried out with the aid of KNX-certified software. The latest versions of product database and

the technical descriptions are available on our website.

Intended use

- Operation of loads, e.g. light on/off, dimming, blinds up/down, brightness values,

temperatures, calling up and saving light scenes, etc.

- Measurement and feedback control of the room temperature

- Installation in appliance box according to DIN 49073

Product characteristics

All buttons can be assigned with push-button sensor functions or functions for controller

operation.

- Back-lit LC display

- One or two functions per button

- Completion with keyset

- Eight status LEDs – red, green or blue

- Brightness of Status LEDs and LED adjustable

- Integrated bus coupling unit

- Connection to room controller or push-button extension module

- Integrated room temperature sensor

- Remote sensor can be connected

- Room temperature control with setpoint value specification

- Two internal independent controllers to control two independent rooms - in conjunction with

extension modules

- Display of room or setpoint temperature (°C or °F)

- Display of outdoor temperature – with external sensor, e.g. weather station

- Display of time, in conjunction with KNX time encoder

- Push-button function or rockers function

- Disabling function: Disable or function switch-over of all or of individual pushbutton

functions

- Alarm function, optionally with confirmation by pressing any button

1/7

32593503

j0082593503 23.02.2016

3 Operation

Operating a function or load

oSwitch: Short press on button.

oDim: Long press on the button.

oMove Venetian blind: Long press on button.

oStop or adjust Venetian blind: Short press on button.

oCall up light scene: Short press on button.

oSave light scene: Long press on button.

oSet value, e.g. brightness or temperature setpoint: Short press on button.

oAdjusting value: Press button for a long time.

iDepending on programming, a button triggers several functions after a longer press or

triggers another function if opposite buttons are pressed simultaneously.

Operating modes and display icons

The device compares the current room temperature with the setpoint temperature and controls

heating or cooling devices according to the current demand. The setpoint temperature depends

on the current operating mode and can be changed by the user, depending on the

programming. The operating modes and the current controller status for the internal controller ś

or are shown in the display.@

- : Operating mode Comfortļ

- : Operating mode StandbyĻ

- : Operating mode Nightĺ

- : Operating mode Frost/heat protection¾

The icon flashes if the room temperature drops below 5 °C / 41 °F. ¾

- : Comfort extension, nightļĺ

- : Comfort extension, frost protectionļ¾

- ... : Fan controller with fan level display. = Fan off.ŝŞ ş Ŝ

- ... : Heating mode with display of the heating stageŢţ Ť

- ... : Cooling mode with display of the cooling stepťŴ ŵ

- or : Setpoint temperature reduced or increased manually... – – ¯ ¯ – – ...

When switched on, the display shows, next to the icon for the current operating mode, either:

- the time: the seconds mark flashes.

- the room temperature: icon ‰

- the outdoor temperature: icon ¶‰

- the setpoint temperature: icon ·‰

- any other temperature: icon ¸

In the menu, the following displays and settings are available in sequence. Some items are not

visible, depending on the programming of the device.

- Displaying the time

- Display of various temperatures

- : Submenu Controller 1ścon1

- : Submenu Controller 2@con2

- : Submenu Displaydisp

- : Exit menu without savingEnd

The submenus for Controllers 1 and 2 each allow settings to be made for the operation mode,

temperatures and fan levels:

- Temperature for Comfort mode

- Change for Heating standby mode

- Change for Cooling standby mode

- Change for Heating night mode

- Change for Cooling night mode

- Presence mode

- Setpoint shift

- Changing the operating mode

- Fan controller

2/7

32593503

j0082593503 23.02.2016

Room controller display compact module

- Displaying the current room temperature

- Displaying the current temperature setpoint

- Displaying the current outdoor temperature

The following menu items can be used to exit the submenu:

- – Exit and save settingsStor

- – Exit without saving settingsESC

Opening and operating a menu

Figure 1: Opening or exiting a menu

Precondition: The menu is programmed and not disabled.

oSwitching to the menu: Press the top two buttons simultaneously (figure 1).

oExiting a menu: Press the top two buttons simultaneously (with or without saving is

dependent on the programming).

oSelect next menu item: Press the button.X

oSwitch to submenu: Press the button.–^

oExit submenu without saving: Press the button.Z–

oSwitch setting/increase value: Press the button.+

oSwitch setting/reduce value: Press the button.–

Figure 2: Menu buttons

3/7

32593503

j0082593503 23.02.2016

Room controller display compact module

Specyfikacje produktu

Marka:	JUNG
Kategoria:	inteligentny dom
Model:	A 5192 KRM TS D
Kolor produktu:	Black, Grey
Typ produktu:	Mechanizm przełączania
Typ kontroli:	Przyciski
Wbudowany wyświetlacz:	Tak
Typ wyświetlacza:	LCD
Technologia łączności:	Przewodowa
Napięcie:	21 - 32 V
Diody LED:	Tak
Czujnik temperatury:	Tak
Przycisk:	Tak