Instrukcja obsługi Joy-It RB-CAMERA-JT-V2-77

Joy-It kamera RB-CAMERA-JT-V2-77

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Joy-It RB-CAMERA-JT-V2-77 (4 stron) w kategorii kamera. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
RB- -CAMERA JT-V2-77
8 MP camera for Raspberry Pi
Joy IT powered by SIMAC Electronics GmbH Pascalstr. 8 47506 Neukirchen Vluyn www.joy it.net- - - - - -
2. CONNECTION
1. GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product.
In the following, we will introduce you to what to observe while starting
up and using this product.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
During use, special attention must be paid to the personal rights and
the right to informational self determination that apply in Germany. -
Connect the camera module to the CSI interface of your Raspberry Pi
with the included ribbon cable as shown in the picture. Pay attention to
the orientation of the cable.
3. INSTALLING THE CAMERA
To use the camera with your Raspberry Pi, you just need to add two lines
to Config.txt.
To do this, enter the following command to open the file you want to
edit:
Now add the following two lines to the end of the file:
Aerward, you can save the file with + and close it with + .CTRL O CTRL X
Then restart your Raspberry Pi with the following command:
sudo nano /boot/config.txt
dtoverlay=imx219
camera_auto_detect=0
sudo reboot
4. USING THE CAMERA
4.1 Taking pictures
To capture images with the camera, the following console command can
be used:
The image is then saved under the name test.jpg. The numbers aer --
width and height represent the resolution in pixels used for the photo.--
4.2 Recording videos
Videos can be recorded with the following command:
The video is then saved under the name test.h264. The number aer -t
represents the recording time in milliseconds.
The numbers aer width and height represent the resolution used for -- --
the video in pixels.
libcamera r -jpeg qt -- - -o test.jpg width 3280 height 2464-- --
libcamera vid qt t 10000 o test.h264 width 1920 height 1080- -- - - -- --


Specyfikacje produktu

Marka: Joy-It
Kategoria: kamera
Model: RB-CAMERA-JT-V2-77

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Joy-It RB-CAMERA-JT-V2-77, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje kamera Joy-It

Instrukcje kamera

Najnowsze instrukcje dla kamera

Canon

Canon WFT-E9 Instrukcja

13 Stycznia 2025
Mamiya

Mamiya C330 Instrukcja

12 Stycznia 2025
Pentax

Pentax Optio S40 Instrukcja

11 Stycznia 2025
Pentax

Pentax Optio S5i Instrukcja

11 Stycznia 2025
Elmo

Elmo MA-1 Instrukcja

11 Stycznia 2025
Leica

Leica M11-D Instrukcja

5 Stycznia 2025