Instrukcja obsługi Joovy Peg Perego Car Seat Adapter

Joovy Produkty dla dzieci Peg Perego Car Seat Adapter

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Joovy Peg Perego Car Seat Adapter (2 stron) w kategorii Produkty dla dzieci. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
!WARNING
This infant car seat adapter is for use ONLY on the Joovy Zoom Joggers. DO NOT use on other stroller models.
This infant car seat adapter is for use ONLY with the Peg Perego® infant car seat models identied below. DO NOT use other infant car seat
models.
ALWAYS install the infant car seat so that the child is facing toward the rear (handlebar) of the stroller.
ALWAYS position the infant car seat so that it securely snaps into place inside the infant car seat adapter frame.
!WARNING
Before each use, check to make sure all four clamps are secure and all Velcro® straps are fully attached.
Installing/Using the Infant Car Seat Adapter
• UnsnapthevesnapslocatedonBOTHsidesoftheseat.See Figure 1.
• Foldthefabricinsideandunderthestrollerframetubessothatthetubesareclearlyexposedonbothsidesofthestroller.See Figure 2.
• Positionthecanopysoitisopenedhalfway.Reclinetheseattoitsmaximumreclineposition.See Figure 3.
• RemovetheVelcro®strapsfromeachclamp,thenopenallfourclampsontheadapter.
• Placethecarseatadapteronthestrollerframetubessothatthecanopyhingebracketsarebetweentheadapterclamps.See Figure 4.
DO NOT allow any of the seat fabric to be captured by the clamp.
• Closeallfourclampsaroundthestrollerframetubes.See Figure 5. Makesurethatallfourclampsarefullyclosedandnoseatfabricis
capturedbytheclamps.
• InserttheloopendofoneVelcro®strapbetweenoneadapterclampandtheseatfabric.Attachthelooparoundthetabontheclamp.
See Figure 6.
• WraptheVelcro®straptightlyaroundtheclamp.See Figure 7.
• EnsurethatthemiddleloopoftheVelcro®straptsovertheclamptab. See Figure 8.
ContinuewrappingtightlyuntiltheentirelengthoftheVelcro®strapissecuredtogether.MakesuretheedgesoftheVelcro®strapare
alignedformaximumstrength.See Figure 9.
• RepeatfortheotherthreeclampsandVelcro®straps.
• Closethecanopycompletely.
NOTE: Tomaximizespaceforyourbaby,attachthetwosetsofsnapsfoundontheundersideofthecanopy.See Figure 10.
• PlacethePegPerego®infantcarseat(sothecarseatfacesthehandlebar)intotheadapteruntilthecarseatsnapsintoplace.Pullupon
thecarseattoensureitissecure.See Figure 11.
• Toremovetheinfantcarseat,pullthereleaselever(sameleverusedtoreleasethecarseatfromitsbase)andliftup.
NOTE: strollerfoldswithcarseatadapterinstalled.
Removing the Infant Car Seat Adapter
• Toremovethecarseatadapter,rstpositionthecanopysothatitisopenedhalfway.
• RemoveallfourVelcro®strapsfromtheclamps.
• Openallfourclampsandremovetheadapterfromthestroller.
• ReattachthefourVelcro®strapstotheclampsontheadapterandstoretheadapterforfutureuse.
• WraptheseatfabricoverthestrollerframetubesandreattachthevesnapslocatedonBOTHsidesofthestroller.
Zoom
Peg Perego® Car Seat Adapter
00951
PEG PEREGO® CAR SEAT ADAPTER COMPATABILITY
Peg Perego® Primo Viaggio
Figure 1
Figure 7
Figure 2
Figure 8
Figure 5Figure 4
Figure 11Figure 10
Figure 6
Figure 3
Figure 9
©joovy 2013 • Document Version 091313
Joovy•2919CantonStreet•Dallas,TX75226•(877)456-5049•Fax:(214)761-1774Email:customerservice@joovy.com•Website:www.joovy.com


Specyfikacje produktu

Marka: Joovy
Kategoria: Produkty dla dzieci
Model: Peg Perego Car Seat Adapter

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Joovy Peg Perego Car Seat Adapter, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Produkty dla dzieci Joovy

Instrukcje Produkty dla dzieci

Najnowsze instrukcje dla Produkty dla dzieci