Instrukcja obsługi JL Audio MVi-DRCADAPT


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JL Audio MVi-DRCADAPT (4 stron) w kategorii Zdalne sterowanie. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
Rotary DRC Adaptor for MVi Amplifiers
(Use with rotary-style Digital Remote Controllers only.)
MVi-DRCADAPT
Product Description:
The MVi-DRCADAPT permits the direct connection of a JL Audio rotary-style Digital
Remote Controller (DRC) to a MVi amplifier via its JLid-COMM Port.
Notes: This product is not compatible with mono MV amplifiers or the MVi-HUB.
This product is not needed for connection of M-DRC-50 push-button controller.
What is Included:
(1) MVi-DRCADAPT
(1) Mounting Clip
(2) Mounting Screws
Placement Considerations:
The MVi-DRCADAPT should be installed near the connected MVi amplifier,
where its JLid status LED can be viewed.
Installation:
1. Plug the cable end of the MVi-DRCADAPT into the JLid-COMM port of the MVi amplifier.
2. Install a compatible DRC controller (sold separately) per its instructions and connect its
cable end to the RJ45 jack of the MVi-DRCADAPT.
Mounting Clip Installation:
A mounting clip is included to secure the MVi-DRCADAPT module. Use the supplied screws
to fasten the mounting clip to a flat surface. Once the mounting clip is installed, attach the
MVi-DRCADAPT module by pressing one side of its notched center section against the
inside of one of the arms of the mounting clip. Continue pressing inward until both arms of
the mounting clip snap around the notched center section of the MVi-DRCADAPT module.
Ensure that the JLid Status LED is facing outward and visible. To remove, grasp the module’s
body and pull while rotating away from the mounting clip.
JLid Status LED:
The MVi-DRCADAPT module is equipped with a multi-color status LED.
Refer to the table below for detailed info:
MVi-DRCADAPT LED Color Status
Green JLid detection in progress
Blue Successful connection of a compatible DRC
Yellow Unrecognized JLid device
(retry attempts result in ashing Yellow)
Yellow-Green (alternating) Faulty JLid device
None (JLid-COMM Port LED of the
connected MVi amplier ashes Red)
Short circuit condition of JLid connection
(MVi-DRCADAPT turns OFF)
To DRC
MVi-DRCADAPT
Connects to the JLid™ COMM Port on MVi ampliers
Note: Components pictured may not be to scale.
DRC sold separately.


Specyfikacje produktu

Marka: JL Audio
Kategoria: Zdalne sterowanie
Model: MVi-DRCADAPT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JL Audio MVi-DRCADAPT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Zdalne sterowanie JL Audio

JL Audio

JL Audio MMR-25W Instrukcja

2 Października 2024
JL Audio

JL Audio HD-RLC Instrukcja

30 Sierpnia 2024
JL Audio

JL Audio DRC-100 Instrukcja

29 Sierpnia 2024
JL Audio

JL Audio CL-RLC Instrukcja

28 Sierpnia 2024
JL Audio

JL Audio RBC-1 Instrukcja

26 Sierpnia 2024
JL Audio

JL Audio VXi-BTC Instrukcja

25 Sierpnia 2024
JL Audio

JL Audio M-RBC-1 Instrukcja

20 Sierpnia 2024
JL Audio

JL Audio MMR-10W Instrukcja

18 Sierpnia 2024
JL Audio

JL Audio DRC-205 Instrukcja

13 Sierpnia 2024

Instrukcje Zdalne sterowanie

Najnowsze instrukcje dla Zdalne sterowanie