Instrukcja obsługi Jensen XS12S

Jensen subwoofer XS12S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Jensen XS12S (3 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 32 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/3

XS1 s Parameters 2/ Specifications

Speciﬁcations/Caractéristiques/Espiciﬁcaciones

Power Handling (RMS)....................................

Power Handling (Peak)..................................

Frequency Response................................

Efﬁciency........................................

.....................................

Voice Coil Diameter..................................

Impedance.....................................................

Nom. Diameter......................................

Outer Diameter...................................

Cutout Diameter.................................

Mounting Depth.............................

350W

1 00W4

2 -250Hz5

9 dB (1W in car) 3

9 00dB (2. V/1m)

2” (50mm)

4 Ohm

1 ” ( mm) 2 305

1 . ” ( mm) 248 317

1 .1 0” (279mm)

5. ” (103 28mm)

Thiele-Small Parameters/Parámetros/Paramètres

Fs...................................................................... 28Hz

Qts.....................................................................0. 5 4 2

Qes....................................................................0.5 12

Qms.................................................................... 3. 0 9

Vas................................................................... 3 95. ft

BL.....................................................................10.8 5

Revc...........................................................

3. Ohm 2

Xmax (linear).................................... +/-10mm/0.40in

• 2” High Temperature (Aluminum Former) Voice Coil w/ 10mm Xmax

• Heavy Duty Motor Structure w 0 oz Magnet(Bumped and Vented) / 4

• Power Handling: 50 Watts RMS, 1 00 Watts Peak3 4

• Sensitivity (2.0V/1M): dB90

•Treated Parabolic Paper Fiber Cone

• Nitrile Rubber Surround for Excellent Damping

• Nomex-Reinforced Spiders for Excellent Linearity

• Optimized Magnet System for Deep Bass Performanc e

• Optimized “Q” for Closed and Ported Enclosures

• Low-Resonance Steel Basket

Caractéristiques Principales

Key Features

Características Principales

•2 "Alta Temperatura (ex aluminio) de la bobina de voz w / 10mm

Xmax

•Estructura de Altas Prestaciones Motor (Bumped y ventilación) w /

40 oz imán

•Manejo de potencia: 50 vatios RMS, 1 00 vatios de potencia 3 4

máxima

•Sensibilidad (2.0V / 1M): dB90

•Cono de fibra de papel tratado parabólico

•Caucho de nitrilo Surround para una amortiguación excelente

•Las arañas reforzado con fibra de Nomex para una excelente

linealidad

•Imán sistema optimizado para un rendimiento Deep Bass

•Optimizado "Q" de Recintos cerrados y portado

•Bajo Resonancia acero Basket

•2 "Haute Température (Aluminium Ancien) Voice Coil w / 10mm

Xmax

•Structure de Heavy Duty Motor (Bumped et Ventilé) w / 0 Magnet 4

•Puissance: 50 Watts RMS, 1 00 Watts crête3 4

•Sensibilité (2.0V / 1M): dB90

•Traitée Parabolique Paper Fiber Cone

•Surround caoutchouc nitrile pour un excellent amortissement

•Spiders Nomex-renforcés pour une excellente linéarité

•Magnet System Optimisé pour Deep Bass Performance

•Optimisé "Q" pour boîtiers fermés et Ported

•Low-Resonance Panier en acier

Recommended Enclosure Dimensions

Attention

• Use 3/4” MDF

• Use wood glue in joints

• Use screws every 4 inches

• Seal cracks inside box

• Dimensions are external

Attention

• Utilisez avec MDF de 3/4”

• Appliquez de la colle à bois

dans les onglets

• Placez les vis tous 4”

• Bouches les ﬁssures à

l’intérior de la boîte

• Les dimensions indiquées

sont celles à l’extérieur

Atención

• Use una tabla de MDF

de 3/4”

• Use pegamento para

madera en las uniones

• Use tornillos cada 4”

• Selle las grietas adentro

de la caja

• Dimensiones externas

Common Math

Trapezoid Area = H x (D1+D2)/2

Trapezoid Volume = H x (D1+D2)/2 x W

Rectangle Area = H x D

Rectangular Box = H x W x D

Circle Area = 0.79 x D x D

Port Volume = 0.79 x D x D x H

Common Conversions

Cubic Feet = Cubic Inches / 1728

Cubic Feet = Liters / 28.3

Liters = Cubic Feet x 28.3

Inches = Meters x 2540

Square Inches = Square Feet / 144

1.5ft3 Ported

1.25ft3 Sealed

KLIPPEL

100

105

110

50 100 200

dB - [V] (rms)

Frequency [Hz]

Sealed Enclosure

Fill all sealed enclosures loosely (8 oz per cubic foot) with

polyester batting or similar material for best bass performance

Good

Enclosure Volume (Internal) = 0.75 ft3 (Vb)

Example Dimensions: 14”H x 12.5”W x 12”D

F3 = 45Hz, Qtc = 1.25

Better

Enclosure Volume (Internal) = 1.00 ft3 (Vb)

Example Dimensions: 14”H x 16”W x 12”D

F3 = 42Hz, Qtc = 1.1

Best

Enclosure Volume (Internal) = 1.25 ft3 (Vb)

Example Dimensions: 14”H x 19.25”W x 12”D

F3 = 39Hz, Qtc = 1.0

Vented Enclosure

Line four walls of vented enclosures with 2” thick polyester

batting or similar material for best bass performance

Good

Enclosure Volume (Internal) = 1.0 ft 3 (Vb)

Example Dimensions: 14”H x 16.0”W x 12”D

Port: 3” Inside Diameter (ID) x 13” Long

FB = 35Hz, F3 = 39Hz

Better

Enclosure Volume (Internal) = 1.25 ft3 (Vb) Example

Dimensions: 14”H x 19.25”W x 12”D Port: 3” Inside

Diameter (ID) x 12.5” Long

FB = 32Hz, F3 = 36Hz

Best

Enclosure Volume Internal = 1.50 ft 3 (Vb)

Example Dimensions: 14”H x 22.5”W x 12”D

Port: 3” Inside Diameter (ID) x 11.5” Long

FB = 30Hz, F3 = 33Hz

WARRANTY

Limited 1 Year Warranty - USA and

Canada

Length of Warranty. This warranty from Dual Electronics Corporation shall be in effect for a period of 1 year

from the date of the first consumer purchase.

Persons Protected. This warranty will be enforceable by the original owner during the warranty period so long

as proof of date of purchase from an authorized dealer is presented whenever warranty service is required.

What is Covered. Except as otherwise specified below, this warranty covers all defects in material and

workmanship in this product. The following are not covered: damage resulting from accident, misuse, abuse,

neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to

follow instructions supplied with the product; damage occurring during shipment (claims must be presented to

the carrier); any plexiglass included with the product; elimination of car static or other electrical interferences;

any product purchased outside USA or Canada, or on which the serial number has been defaced, modified or

removed.

How You Can Get Service.

U.S. Purchasers. Please telephone Jensen Customer Service at 1-8 - -4 .88 921 088

Canadian Purchasers. The product should be returned to the dealer from whom it was purchased and such

dealer either will service or arrange for service of the product. If shipment of the product is required, it should

be packed properly. The original dated bill of sale must always be included with the product as proof of

warranty coverage.

What We Will Pay For. We will pay for all labor and material expenses required to repair the product, but you

must pay any labor costs for the removal and/or installation of the product. If the product is shipped for

warranty service, you must prepay the initial shipping charges, but Dual Electronics Corporation will pay

the return shipping charges if the product is returned to an address inside the USA or Canada.

Limitation of Implied or Statutory Warranties and Conditions. Exclusions. Dual Electronics oration Corp 's

liability is limited to the repair or replacement, at our option, of any defective product and shall not include

special, indirect, incidental or consequential damages of any kind. THIS WARRANTY IS EXCLUSIVE AND IN

LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT

LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE AND ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY IN CONTRACT OR TORT,

WHETHER OR NOT ARISING FROM THE COMPANY'S NEGLIGENCE, ACTUAL OR IMPUTED. NO

PERSON OR REPRESENTATIVE IS AUTHORIZED TO ASSUME FOR THE COMPANY ANY OTHER

LIABILITY IN CONNECTION WITH THE SALE OF THIS PRODUCT. IN NO EVENT SHALL COMPANY BE

LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Dual Electronics Corporation

H , eathrow FL 32746

1-8 - -488 921 088

www.jensen .commobile

Printed in China/Impreso en China/Imprimé en Chine

Specyfikacje produktu

Marka:	Jensen
Kategoria:	subwoofer
Model:	XS12S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Jensen XS12S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje subwoofer Jensen

Jensen J12W Instrukcja

6 Października 2024

Jensen XS12S Instrukcja

6 Maja 2024

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer

JL Audio SGR-10TW3 Instrukcja

13 Października 2024

Teufel T6 Instrukcja

13 Października 2024

Polk DB1040 Instrukcja

10 Października 2024

OSD Audio NERO DUAL X8 Instrukcja

9 Października 2024

OSD Audio NERO WSA Instrukcja

9 Października 2024

Kicker 51CWQ102 Instrukcja

9 Października 2024

Kicker 51CWQ122 Instrukcja

9 Października 2024

Kicker 43C84 Instrukcja

9 Października 2024

Kicker 51CWQ124 Instrukcja

9 Października 2024

OSD Audio FS12 Instrukcja

9 Października 2024