Instrukcja obsługi JBL OnBeat Rumble

JBL Głośniki OnBeat Rumble

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JBL OnBeat Rumble (6 stron) w kategorii Głośniki. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
Quick Setup Guide
JBL® OnBeat RumBLe
WeLcOme
Thank you for purchasing the JBL
® OnBeat Rumble speaker dock. This quick setup guide
will show you how to connect and set up your dock.
IncLuDeD ItemS
AC Cord (varies by region)
Power SupplyJBL OnBeat Rumble Speaker Dock
2
cOnnectIOnS
Power
Connector
Headphone
Connector
Auxiliary
Input
USB
Connector
1. If you are going to use your JBL OnBeat Rumble speaker dock with another audio
source, plug one end of a 3.5mm (1/8") stereo cable (not supplied) into the docks
Auxiliary Input connector, and plug the other end into the audio sources audio-out or
headphone-out connector.
2. If you want to use headphones (such as when previewing mixes with a DJ app), plug
them into the docks Headphone connector.
3. Plug the dock’s power supply into the Power connector on the rear of the dock and
then into a working AC power outlet. The dock will automatically turn on and go into the
Bluetooth® pairing mode (the Source button LED will be flashing blue).
4. The USB port can be used for charging your iPod, iPhone or iPad device.
PLACEMENT
Place the JBL OnBeat Rumble speaker dock on a shelf or table with the rear of its enclosure
at least 3" (76mm) away from a wall or other surface to allow the bass ports to operate
properly.
CONTROLS AND INDICATORS
Bass Boost Button
and LED
Volume Down
Button
Volume Up
Button
Club EQ Button
and LED
Dock
Lid
Power Button
and LED
Source Button
and LED
3
www.jbl.com
Bass Boost button and LED: Press this button to enhance the bass performance. The
buttons LED will glow when Bass Boost is on.
Club EQ button and LED: Press this button to toggle between two EQ mode settings:
“Basic and “Club.” The Basic setting offers a stereo perspective, while the Club setting
produces a high-energy, more focused sound. When the EQ is set to Club, the EQ LED will
glow white.
When you are using the JBL MusicFlow app, the following additional EQ settings are
available: Wider Stereo Movie, Rock Music, Jazz Music and Gaming.
Source button and LED: Press this button to cycle through the audio sources: Bluetooth,
docked device and Auxiliary Input. The Source button LED will glow to indicate the active
source: white for a docked device, blue for a paired device and amber for a Bluetooth
device connected to the Auxiliary input.
If you begin to stream audio from a paired Bluetooth device or play audio from a device
connected to the dock while another source is playing, the dock will automatically switch
to the new source.
Power button and LED: When the dock is on, press the Power button to put it into the
standby mode. The button’s LED will glow solid amber when the unit is in standby. When
the dock is in standby, press the Power button to turn it on. The buttons LED will glow
solid white when the unit is on.
When the dock is in the standby mode, it will automatically turn on when it detects audio
playing from a -connected device or from a docked device.Bluetooth
When the dock is on, it will automatically enter the standby mode after 10 minutes of
inactivity (no audio input and no user-control operation). The button’s LED will glow amber
when the dock is in standby.
Note: When the dock enters the standby mode, it will also bring a docked device into
standby mode.
Volume Up/Down buttons: Press these buttons to raise and lower the docks
volume. To mute the sound, press both buttons at the same time. (The Power button LED
will flash white when the sound is muted.) To restore the sound, press either Volume button
or both buttons together.
Dock Lid: Gently press down on the front edge of the dock lid to release it and reveal the
multi-pin Lightning docking connector. To close the dock, gently push the lid back in the
enclosure until it clicks.
English


Specyfikacje produktu

Marka: JBL
Kategoria: Głośniki
Model: OnBeat Rumble

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JBL OnBeat Rumble, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Głośniki JBL

Instrukcje Głośniki

Najnowsze instrukcje dla Głośniki

Steren

Steren SPK-1100BL Instrukcja

15 Października 2024
Pyle

Pyle PBMSPG6 Instrukcja

14 Października 2024
Marshall

Marshall Tufton Instrukcja

14 Października 2024
Sunstech

Sunstech SPUBT780 Instrukcja

14 Października 2024
Marquant

Marquant 002-222 Instrukcja

13 Października 2024
Naxa

Naxa NAS-3060 Instrukcja

13 Października 2024
Philips

Philips SPA1301 Instrukcja

13 Października 2024