Instrukcja obsługi Jablotron EYE-02


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Jablotron EYE-02 (3 stron) w kategorii Bezpieczeństwo. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
Application Note – EYE-02 Outdoor Installation Page 1 of 3
JABLOCOM s.r.o.
V Nivách 12
466 01 Jablonec nad Nisou
Czech Republic
sales@jablocom.com
http://www.jablocom.com
tel: +420 483 559 711
fax: +420 483 559 713
GSM Security Camera EYE-02
Application Note
EYE-02 Outdoor Installation
INSTALLATION WITHOUT AN EXTERNAL HOUSING
EYE-02 covering allows installation outside the building under condition the camera is not exposed to rain or snow, for
example under the roof. Also the recommended temperature range from -20°C to +55°C should not be exceeded. An
example is shown on the following pictures including a screenshot from the camera.
PIR detector as well as the internal IR illumination can be switched on.
INSTALLATION WITH AN EXTERNAL HOUSING
If you need to install your EYE-02 on the place exposed to rain or snow, you have to use an external housing.
JABLOCOM is going to prepare a complex solution for such installations during following months. If you need an
external housing right now, you can find a suitable housing in your local market.
Please be aware of two basic restrictions while using an external housing:
Antenna shielding
o Use a housing made from plastic only
o Connect an external antenna outside the housing
Front glass make using the internal PIR detector and the internal IR illumination impossible
o Use an external outdoor PIR and an external outdoor IR lamp as accessories and disable the internal
ones
o Remove the front glass if it is possible for the installation
Application Note – EYE-02 Outdoor Installation Page 2 of 3
JABLOCOM s.r.o.
V Nivách 12
466 01 Jablonec nad Nisou
Czech Republic
sales@jablocom.com
http://www.jablocom.com
tel: +420 483 559 711
fax: +420 483 559 713
Using an external PIR and IR lamp
Using an external IR lamp removes the reflection of IR beams from the front glass.
We suggest using the JA-89P wireless outdoor PIR detector as an external PIR detector for EYE-02
outdoor installations.
Removing the front glass
An example of mounting EYE-02 into an external housing from Zoomtech without the front glass you can see on the
following pictures - removing the front glass, mounting the camera body on the holder, adjusting the camera position
within the housing and closing the housing.
+
Application Note – EYE-02 Outdoor Installation Page 3 of 3
JABLOCOM s.r.o.
V Nivách 12
466 01 Jablonec nad Nisou
Czech Republic
sales@jablocom.com
http://www.jablocom.com
tel: +420 483 559 711
fax: +420 483 559 713
You have to find a compromise between the camera coverage, viewing angle and IR illumination angle. If you place it
too deep, you may have problems with the internal IR illumination as shown on the following pictures.
Contrary, if you would install the camera in front of the housing, it may not cover it sufficiently.
Optimum
Based on results of our testing we strongly recommend using the external IR illumination for all outdoor
installations where IR illumination is required.


Specyfikacje produktu

Marka: Jablotron
Kategoria: Bezpieczeństwo
Model: EYE-02

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Jablotron EYE-02, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Bezpieczeństwo Jablotron

Instrukcje Bezpieczeństwo

Najnowsze instrukcje dla Bezpieczeństwo