Instrukcja obsługi IOptron ICam 464C

IOptron kamera ICam 464C

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IOptron ICam 464C (7 stron) w kategorii kamera. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/7
iOptron Corporation 6E Gill Street, Woburn, MA 01801 |
iOptron Planetary Camera Manual
iCAM464C
Product # 3373
Ver. 1.00 2021.12
iOptron reserves the rights to revise this instruction without notice. Actual color/contents/design/function of a product may dier
from those described in this instruction manual.
2
Product Descripon
iCAM464C camera uses a Sony IMX464 color sensor. The imaging area is 1/1 9um pixel size, .8”, with 2.
4.2MP resoluon (2712*1538) and diagonal of 9mm.
iCAM464C camera has a very high sensivity. It is an idea camera for planetary imaging. The camera has
a very low readout noise. The tesng results indicated that the readout noise is as low as 0.75e at a gain
of 350 and around 0.71e at a gain of 400 The camera has a unique DPS (Dead Pixel Suppression) .
technology to eliminate the any abnormal/dead pixel by analyzing camera dark frames. The camera has
a unique HCG mode, which will automacally turn on when the camera gain seng is 80. The HCG ≥
mode can greatly reduce the readout noise and retain the same high dynamic range as it at low gain.
Due to its unique QE response, the sensivity reaches the ak at 800-850nm. An IR850 or CH4 lter can pe
be used with the camera for infrared imaging.
When the camera is connected to the USB3.0 interface and full-resoluon preview is used, it can reach
93 fps in RAW8 mode (10bit ADC). During image recording, the actual recording speed is aected by the
hard drive wring speed. It is recommended to use a high-quality solid state drive to record data to
realize the full benet of the USB3.0 data speed. The ST-4 guiding port allows one to connect the camera
to a mount GUIDE port for ST-4 autoguiding.
Package Contents
iCAM Camera 464C
USB 3.0 cable
ST-4 guiding cable
Online Contents
This Manual
Camera driver
ASCOM driver
System Requirement
Windows 7/8/10 is supported
Linux and Mac OS will be supported soon.
Driver Installaon
1. Download iCAM/PlayerOne camera driver. Save in a folder or desktop.
2. DO NOT connect the camera to the computer yet. Double click on downloaded driver to
enter installaon page.
3
3. Check and click License Agreement Install.
4. Check and click . Always Trust Soware from PlayerOne Install
5. Click when it is down. Install Finished
6. Now connect the camera to a computer using included USB 3.0 cable. Check iCAM status in
Device Manager Imaging devices under .

Specyfikacje produktu

Marka: IOptron
Kategoria: kamera
Model: ICam 464C

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IOptron ICam 464C, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje kamera IOptron

IOptron

IOptron ICam 462C Instrukcja

25 Grudnia 2024
IOptron

IOptron ICam 464C Instrukcja

25 Grudnia 2024

Instrukcje kamera

Najnowsze instrukcje dla kamera

Minolta

Minolta MN60WP Instrukcja

24 Grudnia 2024
D-Link

D-Link DCS-935LH Instrukcja

23 Grudnia 2024
Kogan

Kogan KAKIDCIPPLA Instrukcja

21 Grudnia 2024
Rollei

Rollei Sportsline Fun Instrukcja

21 Grudnia 2024
GE

GE E1055W Instrukcja

15 Grudnia 2024
Imou

Imou Ranger Dual 6MP Instrukcja

15 Grudnia 2024
Imou

Imou Ranger Dual 8MP Instrukcja

15 Grudnia 2024
Imou

Imou Ranger Dual 10MP Instrukcja

15 Grudnia 2024
Kodak

Kodak Step Touch Instrukcja

15 Grudnia 2024
Kodak

Kodak Ektar H35N Instrukcja

15 Grudnia 2024