Instrukcja obsługi ION Block Party Live

ION Głośniki Block Party Live

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ION Block Party Live (28 stron) w kategorii Głośniki. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/28
Block Party Live
Quickstart Guide
English ( 2 – 4 )
Guía de inicio rápido
Español ( 5 – 7 )
Guide d'utilisation rapide
Français ( 8 – 10 )
Guida rapida
Italiano ( 11 – 13 )
Kurzanleitung
Deutsch ( 14 – 16 )
Snelstartgids
Nederlands ( 17 – 19 )
Snabbstartsguide
Svenska ( 20 – 22 )
Pikakäyttöopas
Suomi ( 23 – 25 )
Appendix
English ( 26 )
2
Quickstart Guide (English)
Support
For product registration, visit the ION website: ionaudio.com
For the latest information about this product, visit
ionaudio.com/blockpartylive.
For additional product support, visit ionaudio.com/support.
For safety/warranty information, visit ionaudio.com/warranty.
WARNING: DO NOT splash or immerse in water or other liquids.
Not for use in rain. Use only in dry locations.
WARNING: DO NOT look directly into the dome light.
Do not sit, stand, or apply pressure on the dome light.
Rechargeable Batteries
Rechargeable lead-acid batteries are the same type used in automobiles. As with your car battery, how you use this
battery has a significant impact on its lifespan. With proper use and treatment, a lead-acid battery can last for years.
Here are some recommendations for getting the longest life from the internal battery.
GENERAL USAGE
• FULLY CHARGE THE BATTERY BEFORE USING IT.
• CHARGE THE BATTERY COMPLETELY AFTER EACH USE.
STORAGE
• For best product longevity, do not store at exceedingly hot (greater than 90F (32C)) or exceedingly cold
(less than 32F (0C)) temperatures.
• It is acceptable to leave your sound system plugged in. This will not overcharge the battery.
• If you leave the battery level low and do not charge it for 6 months, it may permanently lose capacity.
REPAIR
• If the battery fails to charge, check your fuse near the power cable input. If your fuse is intact and it still
will not charge, contact ION Audio at ionaudio.com.
DISPOSAL
• Bring the unit to a recycling center or dispose of in accordance with local ordinances.
Quick Setup/Connection Diagram
1. Make sure all items listed in Box Contents at the beginning of this guide are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
3. For optimal performance, place Block Party Live in the center of the room so it is unobstructed by walls,
furniture, etc.
4. Move Light Mode switch to OFF.
5. Turn down the Master Volume on the Block Party Live.
6. Turn on Block Party Live.
7. Connect your music player with an audio cable or Bluetooth. (see Connecting with a Bluetooth Device for more
details on this)
8. Adjust the volume on your music player and on Block Party Live as needed.
9. Adjust the Light Mode switch on Block Party Live as needed.
10. Turn off Block Party Live when not in use.
BOX CONTENTS
Block Party Live
Microphone with mic cable
Audio Cable with 1/8” (3.5mm)
connectors
Power Cable (standard IEC)
Quickstart Guide
Safety Instructions & Warranty
Information Booklet
TOP PANEL
MICROPHONE
MP3 PLAYER
(not included)
MICROPHONE
REAR PANEL
POWER
3
Diagram and Parts Description
1. Microphone Input with Volume Control (1/4"): This
mono input accepts a 1/4" input such as a microphone,
guitar, or other musical instrument.
2. Auxiliary input: This stereo 1/8” input can be used to
connect a smartphone, MP3 player, or other audio
source.
3. Bluetooth: The Paired LED will be lit
when a device is paired to Block Party
Live. This LED will not be lit when Block
Party Live is first powered on (unless it
was previously paired with a device).
Press the Disconnect button to
disconnect a paired Bluetooth device.
4. Master Volume Control: This adjusts
the speaker’s main mix volume, which
includes Microphone Input, Auxiliary
Input, and the audio of a paired Bluetooth
device.
5. Light Mode: There are three modes to select from for how the dome lights react to the music.
• Auto = the dome lights spin and change color with a predetermined pattern regardless of the beat of the
music playing.
• Beat Sync = the dome lights spin and change color to the beat of the music playing.
• App Mode = the dome lights are controlled using the mobile app (available for Android or iOS).
6. Power LED: Indicates whether Block Party Live is on or off.
7. Charging LED : This illuminates when the unit is attached to wall power and is in the process of charging.
8. Battery Level Indicator: While the unit is powered ON and the unit is not plugged in, these four lights indicate
the power left in the battery. Battery life varies based on volume and usage.
9. Dome: The dome light can spin and react to the music playing (depending on the Light Mode that is selected).
10. Power Cable Input (IEC): Insert the included power cable here to power the unit.
11. Power ON/OFF Switch: Turns Block Party Live on or off.
12. Air Vents: These air intake and air outtake vents operate when Light Mode is turned on to ensure the light
dome operates efficiently.
Note: Please ensure these vents do not get covered or blocked.
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source or musical instrument. Also, try to
reduce the overall volume of Block Party Live.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level. This
will allow you to play the music louder before clipping (distortion) occurs.
If there is a high-pitched whistling noise when using microphones: This is probably feedback. Point the
microphone away from the speaker.
If you can’t hear the microphone over the music volume: Turn down the music volume from your source.
*WARNING: Do not look directly into the
dome light. Do not sit, stand, or apply
pressure on the dome light.
6
5
9
8
4
3
2
1
7
1111
1010
1212 1212

Specyfikacje produktu

Marka: ION
Kategoria: Głośniki
Model: Block Party Live

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ION Block Party Live, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Głośniki ION

ION

ION Block Party Live Instrukcja

5 Lipca 2024
ION

ION RETRO ROCKER Instrukcja

5 Lipca 2024
ION

ION Party Time Instrukcja

5 Lipca 2024
ION

ION EXPLORER BLUETOOTH iPA23B Instrukcja

5 Lipca 2024
ION

ION Road Rider Instrukcja

5 Lipca 2024
ION

ION Flash Cube Instrukcja

5 Lipca 2024
ION

ION Rock Speaker Bluetooth Instrukcja

5 Lipca 2024
ION

ION Mega Party Express Instrukcja

5 Lipca 2024
ION

ION Block Rocker AM FM iPA16 Instrukcja

5 Lipca 2024
ION

ION Clipster Active Instrukcja

5 Lipca 2024

Instrukcje Głośniki

Najnowsze instrukcje dla Głośniki

Steren

Steren SPK-1100BL Instrukcja

15 Października 2024
Pyle

Pyle PBMSPG6 Instrukcja

14 Października 2024
Marshall

Marshall Tufton Instrukcja

14 Października 2024
Sunstech

Sunstech SPUBT780 Instrukcja

14 Października 2024
Definitive Technology

Definitive Technology Mythos XTR-50 Instrukcja

14 Października 2024
Wharfedale

Wharfedale Diamond 8.2 Pro Instrukcja

14 Października 2024
Bang & Olufsen

Bang & Olufsen BeoLab Penta Instrukcja

13 Października 2024
Marquant

Marquant 002-222 Instrukcja

13 Października 2024
Naxa

Naxa NAS-3060 Instrukcja

13 Października 2024
Philips

Philips SPA1301 Instrukcja

13 Października 2024