Instrukcja obsługi Intellinet 562041


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Intellinet 562041 (16 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
Scan to
register your
product warranty
Important: Read before use. • Importante: Leer antes de usar.
For additional benets:
or go to: register.intellinet-network.com/r/562041
54-Port L3 Fully Managed
PoE+ Switch with 48 Gigabit
Ethernet Ports and 6 SFP+ Uplinks
Instructions Model 562041 (IPS-54M06-10G-850W)
2
This guide presents the basic steps to set up and operate this device.
For the user manual and specifications, visit . Register your product intellinet-network.com
at register.intellinet-network.com/r/562041 or scan the QR code on the cover.
Placement
Prior to use, it is recommended that the switch be placed/positioned:
• on a level surface that can support the weight of the switch
(and any other items that need to be considered);
• with a minimum of 25 mm (approx. 1”) of clearance
on the top and sides for adequate ventilation;
• away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
• where it cannot be affected by excessive moisture;
• within 100 m (approx. 328’) of network devices (RJ45) it’s to be connected to.
• Attach the rubber feet to the bottom of each corner of the switch to increase stability.
The switch includes brackets and screws for optional rack mounting.
1 Disconnect any cables from the switch.
2 Position a bracket over the mounting holes on one side
of the switch and secure it in place with screws.
3 Repeat Step 2 on the other side of the switch.
4 Position the switch in the rack and screw
the brackets to the rack.
5 Reconnect any cables.
Front Panel
All ports on the switch support Auto-MDI/MDI-X functionality, so
you can use straight or crossover UTP/STP cables to connect the
RJ45 ports to PCs, routers, hubs, other switches, etc.
Cat5e/6/6a/8.x UTP/STP cables provide optimal performance; if a status LED doesn’t
English
Instructions
3
English
indicate a link or activity, check the corresponding device for proper setup and operation.
Ports 1 – 48 can provide power to a connected powered device (PoE+ output up
to 30 watts on ports); all powered devices should comply with IEEE 802.3at/af.
LED Color Status Operation
PWR Green On The Switch is connected to a power source
Off The Switch is not connected to a power source
SYS Orange Flashing System is running.
Off System is abnormal or no power
1–48
Link Green
On Port is connected
Flashing Data is transmitted/received
Off No link established.
1–48
PoE Orange On The connected device (PD) is receiving power.
Off The port is not powered or no PD is found
49–54
(SFP) Green
On Valid port connection.
Flashing Data transmitted/received.
Off No link established.
Rear Panel
Chassis Ground Column
Located on the side of the power supply connector, a grounding
terminal connector is used to provide proper grounding for your switch.
It should be wired to an object that provides earth ground.
Power
Use the included power cable to connect the receptacle on the back of
the switch to a power outlet. Then, turn the On/Off switch to On.
WARNING: Avoid turning on the power switch before connecting the power
cable, as it may cause a power surge that could damage the Switch.
Basic Web-Based Browser Management
1 Open your Web browser.
2 http://Enter and the IP address of the switch in the Address field.
The default management IP address is . 192.168.2.1
3 Press to display the login screen. In the Username field, enter ; in the Enter admin
Password field, enter the on the bottom of the switch. Click .serial number OK
Instructions


Specyfikacje produktu

Marka: Intellinet
Kategoria: przełącznik
Model: 562041

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Intellinet 562041, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje przełącznik Intellinet

Intellinet

Intellinet 560641 Instrukcja

22 Września 2024
Intellinet

Intellinet 560849 Instrukcja

18 Września 2024
Intellinet

Intellinet 506441 Instrukcja

18 Września 2024
Intellinet

Intellinet 561617 Instrukcja

16 Września 2024
Intellinet

Intellinet 561945 Instrukcja

16 Września 2024
Intellinet

Intellinet 561686 Instrukcja

16 Września 2024
Intellinet

Intellinet 561693 Instrukcja

19 Sierpnia 2024
Intellinet

Intellinet 561921 Instrukcja

19 Sierpnia 2024
Intellinet

Intellinet 561167 Instrukcja

19 Sierpnia 2024
Intellinet

Intellinet 561624 Instrukcja

19 Sierpnia 2024

Instrukcje przełącznik

Najnowsze instrukcje dla przełącznik

INOGENI

INOGENI CAM230 Instrukcja

14 Stycznia 2025
Luxul

Luxul XMS-5248P Instrukcja

14 Stycznia 2025
Luxul

Luxul AMS-2624P Instrukcja

14 Stycznia 2025
Luxul

Luxul XGS-1005 Instrukcja

14 Stycznia 2025
Luxul

Luxul AGS-1008M Instrukcja

14 Stycznia 2025
Luxul

Luxul XMS-1208P Instrukcja

14 Stycznia 2025
Luxul

Luxul XMS-7048P Instrukcja

14 Stycznia 2025
Luxul

Luxul AMS-2600 Instrukcja

14 Stycznia 2025