Instrukcja obsługi Intellinet 524148

Intellinet przełącznik 524148

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Intellinet 524148 (16 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

Important: Read before use. • Importante: Leer antes de usar.

24-Port Gigabit Ethernet

PoE+ Switch with 2 SFP Ports

Instructions

Model 561891 (IPS-24G02-370W)

For additional benets:

or go to: register.intellinet-network.com/r/561891

Scan to

product warranty

2English

Instructions

The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports offers

an array of time-saving, cost-effective features while providing superior network throughput.

No configuration is required and installation is plug and play. With a backplane speed of 52

Gbps, plenty of performance is available for your computers, servers and other networking

devices. Each of the ports automatically senses the link speed of the connected network

device and adjusts to 10, 100 or 1000 Mbps for compatibility and maximum performance.

This PoE switch is designed to provide compatible devices with enough power when needed.

It offers up to 30 watts of power per port until its power budget of 370 watts is reached.

Green Ethernet Technology

This Intellinet Network Solutions switch detects link status to all connected devices and

reduces the power usage of ports not in use. In addition, the switch can adjust the level of

power output based on the length of the network cable connected to a particular port. This

feature allows for the enjoyment of maximum network performance, and when things slow

down, it automatically scales back power usage to conserve energy and save money.

For specifications, visit intellinetnetwork.com. Register your product at

Front Panel

LED COLOR STATUS STATUS DESCRIPTION

PWR Off Power Off

Green On Power On

Link/Act/

Speed

(1-24,

25F-26F

[SFP])

Off No device is connected to the port.

Orange On A device is connected to the port at 10/100 Mbps speeds.

Green On A device is connected to the port at 1000 Mbps speeds.

Orange / Green Flashing Sending or receiving data

PoE (1-24) Green

Off No powered device (PD) is connected to the port.

On The connected device is receiving power.

Flashing Abnormal power supply

Cat5e/6/6a/8.x UTP/STP cables provide optimal performance; if a status LED doesn’t indicate

a link or activity, check the corresponding device for proper setup and operation.

Slide Switch

• : default mode; allows normal communication between ports 1 – 26.Normal

• Flow Control: disables the switch’s flow-control function.

• : isolates ports 1 – 24 from each other while VLAN

allowing them to connect to ports 25 and 26.

English

Rear Panel

Power

Use the included power cord to connect the device (on the rear panel)

to an AC outlet. The device supports AC 100 – 240 V, 50/60 Hz.

Chassis Ground Column

Located on the side of the power supply connector, a grounding terminal connector is used to

provide proper grounding for your Intellinet Network Solutions switch. If you use the chassis

grounding screw, it should be wired to an object that provides earth ground. In rackmount

installations, grounding is typically provided by the metal frame of the mounting rack.

Placement

Desktop Installation

Prior to use, it is recommended that the switch be placed/positioned on a level surface that can

support the weight of the switch (and possibly other objects) with at least 25 mm (approx. 1”) of

clearance for ventilation; away from sources of electrical noise (radios, transmitters, broadband

amplifiers); and within 100 m (approx. 328’) of network devices it’s to be connected to.

Rackmount Installation

The switch can be mounted in an EIA standard-sized, 19-inch rack. Attach the mounting brackets

on the switch’s side panels (one on each side) and secure them with the screws provided.

Use the screws provided with the equipment rack to mount the

Intellinet Network Solutions switch to the rack.

Instructions

Specyfikacje produktu

Marka:	Intellinet
Kategoria:	przełącznik
Model:	524148
Kolor produktu:	Czarny
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100 - 240 V
Wysokość produktu:	44 mm
Szerokość produktu:	440 mm
Głębokość produktu:	130 mm
Waga produktu:	1980 g
Podręcznik użytkownika:	Tak
Certyfikaty:	FCC Class B, CE
Maksymalne zużycie mocy:	20 W
Standardy komunikacyjne:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Pełny dupleks:	Tak
Obsługa PoE:	Nie
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	10 - 90 %
Układ:	1U
Przewody:	Prąd przemienny
Diody LED:	LAN, Status, Y
Zakres temperatur (przechowywanie):	-40 - 70 °C
Możliwości montowania w stelażu:	Tak
Filtrowanie adresów MAC:	Tak
Typ przełącznika:	Nie zarządzany
Podstawowe przełączanie RJ-45 Liczba portów Ethernet:	16
Podstawowe przełączania Ethernet RJ-45 porty typ:	Gigabit Ethernet (10/100/1000)
Wielkość tabeli adresów:	8192 wejścia
Przepustowość rutowania/przełączania:	32 Gbit/s
Technologia okablowania Copper Ethernet:	1000BASE-T, 100BASE-TX, 10BASE-T
Automatyczne MDI/MDI-X:	Tak
Store-and-forward:	Tak
Zestaw do montażu haków:	Tak
Szybkość transmisji danych:	10/100/1000 Mbps
Pamięci bufora pakietów:	0.256 MB