Instrukcja obsługi Intel Pentium D 840

Intel edytor Pentium D 840

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Intel Pentium D 840 (106 stron) w kategorii edytor. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/106

Intel® Pentium® D Processor 800Δ

Sequence

Datasheet

– On 90 nm Process in the 775-land LGA Package and supporting

Intel® Extended Memory 64 TechnologyΦ

February 2006

Document Number: 307506-003

2Datasheet

Contents

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY

ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN

INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS

ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES

RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER

INTELLECTUAL PROPERTY RIGHT. INTEL PRODUCTS ARE NOT INTENDED FOR USE IN MEDICAL, LIFE SAVING, OR LIFE SUSTAINING

APPLICATIONS.

Intel may make changes to specifications and product descriptions at any time, without notice.

Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for

future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.

The Intel® Pentium® D processor may contain design defects or errors known as errata which may cause the product to deviate from published

specifications. Current characterized errata are available on request.

ΔIntel processor numbers are not a measure of performance. Processor numbers differentiate features within each processor family, not across

different processor families. Over time processor numbers will increment based on changes in clock speed, cache, FSB, or other features, and

increments are not intended to represent proportional or quantitative increases in any particular feature. Current roadmap processor number

progression is not necessarily representative of future roadmaps. See http://www.intel.com/products/processor_number for details.

ΦIntel® Extended Memory 64 Technology (Intel® EM64T) requires a computer system with a processor, chipset, BIOS, operating system, device

drivers and applications enabled for Intel EM64T. Processor will not operate (including 32-bit operation) without an Intel EM64T-enabled BIOS.

Performance will vary depending on your hardware and software configurations. See http://www.intel.com/info/em64t for more information including

details on which processors support EM64T or consult with your system vendor for more information.

Enabling Execute Disable Bit functionality requires a PC with a processor with Execute Disable Bit capability and a supporting operating system.

Check with your PC manufacturer on whether your system delivers Execute Disable Bit functionality.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Intel, Pentium, Intel Xeon, Intel NetBurst, Intel SpeedStep and the Intel logo are trademarks or registered trademarks of Intel Corporation or its

subsidiaries in the United States and other countries.

*Other names and brands may be claimed as the property of others.

Datasheet 3

Contents

1 Introduction....................................................................................................................................11

1.1 Terminology ........................................................................................................................12

1.1.1 Processor Packaging Terminology ........................................................................12

1.2 References .........................................................................................................................13

2 Electrical Specifications.................................................................................................................15

2.1 Power and Ground Lands...................................................................................................15

2.2 Decoupling Guidelines........................................................................................................15

2.2.1 VCC Decoupling ....................................................................................................15

2.2.2 VTT Decoupling.....................................................................................................15

2.2.3 FSB Decoupling.....................................................................................................16

2.3 Voltage Identification ..........................................................................................................16

2.4 Reserved, Unused, FC and TESTHI Signals......................................................................18

2.5 Voltage and Current Specifications ....................................................................................19

2.5.1 Absolute Maximum and Minimum Ratings.............................................................19

2.5.2 DC Voltage and Current Specifications .................................................................19

2.5.3 VCC Overshoot Specification ................................................................................25

2.5.4 Die Voltage Validation ...........................................................................................26

2.6 Signaling Specifications......................................................................................................26

2.6.1 FSB Signal Groups ................................................................................................26

2.6.2 GTL+ Asynchronous Signals .................................................................................28

2.6.3 FSB DC Specifications ..........................................................................................29

2.7 Clock Specifications............................................................................................................32

2.7.1 FSB Clock (BCLK[1:0]) and Processor Clocking...................................................32

2.7.2 FSB Frequency Select Signals ..............................................................................32

2.7.3 Phase Lock Loop (PLL) and Filter .........................................................................33

3 Package Mechanical Specifications ..............................................................................................35

3.1 Package Mechanical Drawing ............................................................................................35

3.2 Processor Component Keep-Out Zones.............................................................................39

3.3 Package Loading Specifications.........................................................................................39

3.4 Package Handling Guidelines.............................................................................................39

3.5 Package Insertion Specifications........................................................................................40

3.6 Processor Mass Specification.............................................................................................40

3.7 Processor Materials ............................................................................................................40

3.8 Processor Markings ............................................................................................................40

3.9 Processor Land Coordinates ..............................................................................................42

4 Land Listing and Signal Descriptions ............................................................................................43

4.1 Processor Land Assignments .............................................................................................43

4.2 Alphabetical Signals Reference..........................................................................................66

5 Thermal Specifications and Design Considerations ......................................................................75

5.1 Processor Thermal Specifications ......................................................................................75

5.1.1 Thermal Specifications ..........................................................................................75

5.1.2 Thermal Metrology.................................................................................................79

Specyfikacje produktu

Marka:	Intel
Kategoria:	edytor
Model:	Pentium D 840
Typ produktu:	Procesor
Typ procesora:	Intel® Pentium® D
Model procesora:	840
Kod zharmonizowanego systemu (HS):	8473301180
Producent procesora:	Intel
Liczba rdzeni procesora:	2
Rodzaj opakowania:	Pudełko detaliczne
Gniazdo procesora:	LGA 775 (Socket T)
Maksymalna temperatura eksploatacji:	69.8 °C
Korekcja ECC:	Nie
Zautomatyzowany system śledzenia klasyfikacji towarów (CCATS):	NA
Procesor ARK ID:	27514
Technologia Intel® Hyper Threading (Intel® HT Technology):	Nie
Technologia Intel® Turbo Boost:	Nie
Nowe instrukcje AES (Intel® AES-NI):	Nie
Technologia Udoskonalona Intel SpeedStep:	Tak
Technologia Intel® Trusted Execution:	Nie
Intel® Enhanced Halt State:	Tak
Intel® 64:	Tak
Technologia Wirtualizacji Intel® (Directed I/O) (VT-d):	Nie
Technologia virtualizacji Intel® (VT-x):	Nie
Typ pamięci procesora:	L2
Cache procesora:	2 MB
Litografia procesora:	90 nm
Liczba wątków:	2
Tryb pracy procesora:	64-bit
Termiczny układ zasilania (TDP):	130 W
Bezkonfliktowy procesor:	Nie
Kod procesora:	SL88R
Technologia Execute Disable Bit (EDB):	Tak
Stan spoczynku:	Tak
Technologie Thermal Monitoring:	Nie
Wbudowane opcje dostępne:	Nie
Typ magistrali:	FSB
Wielkość opakowania procesora:	37.5 x 37.5 mm
Karta graficzna on-board:	Nie
Parytet FSB:	Nie
Tcase:	69.8 °C
Magistrala systemowa:	800 MHz
Seria procesora:	Intel Pentium D 800 Series
Intel® Demand Based Switching:	Nie
Współczynnik Magistrala/Rdzeń:	16
Liczba przetwarzających tranzystorów:	230 M
Die Size przetwarzania:	206 mm²
Rozszerzenie PAE (Physical Address Extension):	32 bit
Numer klasyfikacji kontroli eksportu (ECCN):	3A991.A.1
Pudełko:	Nie
Częstotliwość bazowa procesora:	3.2 GHz
Segment rynku:	Komputer stacjonarny
Zakres napięcia VID:	1.2 - 1.4 V
Przepustowość magistrali:	800
Rodzaje magistrali:	MHz
Status:	Discontinued
Nazwa producenta procesora:	Intel® Pentium®
Rodzina produktów:	Legacy Intel Pentium Processor
Ostatnia zmiana:	63903513
Prędkość magistrala:	800 MHz
Data premiery:	Q2'05