Instrukcja obsługi Intel DC S3500
Intel
dysk półprzewodnikowy (SSD)
DC S3500
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Intel DC S3500 (31 stron) w kategorii dysk półprzewodnikowy (SSD). Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/31
April 2013
Order Number: 328860-001US
Intel® Solid-State Drive DC S3500 Series
Product Specification
Capacity:
2.5-inch: 80/120/160/240/300/480/600/800 GB
1.8-inch: 80/240/400/800 GB
Components:
Intel® 20nm NAND Flash Memory
Multi- vel Cell (MLLe C)
Form Factor: 2.5 inch and 1.8-inch –
Read and Write IOPS1,2 (Full LBA Range,
Iometer* Queue Depth 32)
Random 4 KB3 Reads: Up to 75,000 IOPS
Random 4 KB Writes: Up to 11,500 IOPS
Random 8 KB3 Reads: Up to 47,500 IOPS
Random 8 KB Writes: Up to 5,500 IOPS
Bandwidth Performance1
Sustained Se ential Read: 500 MB/squ Up to 4
Sustained Se ential Writ qu e: Up 450 MB/s to
Latency (average sequential)
Read: 50 µs (TYP)
Write: µs (TYP) 65
Quality of Service5 6,
Read/Write: 500 µs / 5 ms (99.9%)
AES -bit Encryp256 tion
Compliance
SATA Revision 3.0; compatible with SATA 6Gb/s,
3Gb/s and 1.5Gb/s interface rates
ATA8-ACS2; includes SCT (Smart Command
Transport) and device statistics log support
Enhanced SMART ATA feature set
Native Command Queuing (NCQ) command set
Data set management Trim command
Compatibility
Windows 7 and Windows 8
Windows Server 2012
Windows Server 2008 Enterprise 32/64bit SP2
Windows Server 2008 R2 SP1
Windows Server 2003 Enterprise 64bit SP2 R2
Red Hat Enterprise Linux* 5.5, 5.6, 6.1, 6.3
SUSE* Linux Enterprise Server 10, 11 SP1
CentOS 64bit 5.7, 6.3
Intel® SSD Toolbox with Intel® SSD Optimizer
Product Ecological Complian ce
RoHS*
Power Management
2.5 inch: 5 V or 12 V SATA Supply Rail7
1.8 inch: 3.3 V SATA Supply Rail
SATA Interface Power Management
OS-aware hot plug/removal
Enhanced power-loss data protection
Pow er
Active: Up to 5 W (TYP) .0
Idle: 650 mW8
Weig ht:
2.5-inch -80 240 GB: 70 grams ± 2 grams
2.5-inch 300-800 GB: 72 grams ± 2 grams
1.8-inch 80 GB: 35 grams ± 2 grams
1.8-inch 0-800 GB: 37 grams ± 2 gr 24 ams
Temperature
Operating 0°: C to 70° C
Non-Operating9: -55° C to 95° C
Temperature monitoring and logging
Thermal throttling
Shock (oper ing and non-operating): at
1,000 G/0.5 msec
Vibration
Operating: 2.17 GRMS (5-700 Hz)
Non-Operating: 3.1 G3 RMS (5-800 Hz)
Altitude (simulated)
Operating: -1,000 to 10,000ft
Non-Operating: -1,000 to 40,000ft
Reliability
Uncorrectable Bit Error Rate (UBER):
1 sector per 10 17
bits read
Mean Time Between Failures (MTBF):
2, 0 00 hours 00 ,0
End- -End data protection to
En rance Ratingdu 10:
80 GB: W 0 GB: 70 TBW 45 TB –12
160 GB: 100 W GB: W TB –240 140 TB
300 GB: 170 TBW 400 GB: 225 TBW –
480 GB TBW 600 GB: 330 TBW : 275 –
800 GB: W 450 TB
Certifications and Declarations
UL*, CE*, C-Tick*, BSMI*, KCC*, Microsoft* WHCK,
VCCI*, SATA-IO
1. Performan value vary by capacity and form factor ce s
2. Performance specifications apply to both compressible and incompressible data
3. 92 4 KB = 4,096 bytes; 8 KB = 8,1 bytes
4. MB = 1,000,000 bytes/second./s
5. Based on Random 4KB QD=1 workload, measured as the time taken for 99.9
percentile of commands to finish the round-trip from host to drive
and back to host
6. Measurement taken once the workload has reached steady state but including all background activities required for normal oper ation and data
reliability
7. Defaults to 12V, if both 12V and 5V are present
8. Based on 5V supply
9. Please contact your Intel representative for details on the non-operating temperature range
10. Based on JESD218 standard
Intel® Solid-State Drive DC S3500
Product Specification April 2013
2 Order Number: 328860-001US
Ordering Information
Contact your local Intel sales representative for ordering information.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR
OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF
SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO
SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY,
OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
A "Mission Critical Application" is any application in which failure of the Intel Product could result, directly or indirectly, in personal injury or death. SHOULD
YOU PURCHASE OR USE INTEL'S PRODUCTS FOR ANY SUCH MISSION CRITICAL APPLICATION, YOU SHALL INDEMNIFY AND HOLD INTEL AND ITS
SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS, OFFICERS, AND EMPLOYEES OF EACH, HARMLESS AGAINST ALL CLAIMS
COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS' FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF PRODUCT LIABILITY,
PERSONAL INJURY, OR DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR NOT INTEL OR ITS SUBCONTRACTOR
WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF THE INTEL PRODUCT OR ANY OF ITS PARTS.
Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of
any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for
conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design with this
information.
The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published
specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents which have an order number and are referenced in this document, or other Intel literature, may be obtained by calling 1-800-548-4725,
or go to: http://www.intel.com/design/literature.htm
Low Halogen applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intel components as well as purchased
components on the finished assembly meet JS- 9 requirements, and the PCB/substrate meet IEC 61249-2-21 requirements. The replacement of 70
halogenated flame retardants and/or PVC may not be better for the environment.
Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2013 Intel Corporation. All rights reserved.
Intel® Solid-State Drive DC S3500
Order Number: 328860-001 3 US
Contents
Revision History ..............................................................................................................................4
Terms and Acronyms .......................................................................................................................4
1.0 Overview .............................................................................................................................5
2.0 Product Specicaons ..........................................................................................................6
2.1 Capacity ............................................................................................................................... 6
2.2 Performance ........................................................................................................................ 6
2.3 Electrical Characteriscs ..................................................................................................... 8
2.4 Environmental Condions ................................................................................................. 10
2.5 Product Regulatory Compliance ........................................................................................ 11
2.6 Reliability ........................................................................................................................... 11
2.7 Temperature Sensor .......................................................................................................... 12
2.8 Power Loss Capacitor Test ................................................................................................ 12
2.9 Hot Plug Support ............................................................................................................... 12
3.0 Mechanical Informaon ..................................................................................................... 13
4.0 Pin and Signal Descripons ................................................................................................. 15
4.1 2.5-inch Form Factor Pin Locaons ................................................................................... 15
4.2 1.8-inch Form Factor Pin Locaons ................................................................................... 15
4.3 Connector Pin Signal Denions ....................................................................................... 16
4.4 Power Pin Signal Denions ............................................................................................. 16
5.0 Supported Command Sets .................................................................................................. 18
5.1 ATA General Feature Command Set ................................................................................. 18
5.2 Power Management Command Set .................................................................................. 18
5.3 Security Mode Feature Set ................................................................................................ 18
5.4 SMART Command Set ....................................................................................................... 19
5.5 Device Stascs ................................................................................................................. 24
5.6 SMART Command Transport (SCT) ....................................................................................25
5.7 Data Set Management Command Set ............................................................................... 25
5.8 Host Protected Area Command Set .................................................................................. 25
5.9 -Bit Address Command Set48 ............................................................................................ 25
5.10 General Purpose Log Command Set ..................................................................................25
5.11 Nave Command Queuing ................................................................................................ 26
5.12 Soware Sengs Preservaon ......................................................................................... 26
6.0 Cercaons and Declarations ........................................................................................... 27
7.0 References ......................................................................................................................... 27
Appendix A: IDENTIFY DEVICE Command Data ............................................................................... 28
Specyfikacje produktu
| Marka: | Intel |
| Kategoria: | dysk półprzewodnikowy (SSD) |
| Model: | DC S3500 |
| Kolor produktu: | Srebrny |
| Wysokość produktu: | 7 mm |
| Waga produktu: | 72 g |
| Obsługiwane systemy operacyjne Windows: | Tak |
| Wewnętrzny: | Tak |
| Zakres temperatur (eksploatacja): | 0 - 70 °C |
| Szyfrowanie / bezpieczeństwo: | 256-bit AES |
| Pojemność dysku: | 300 GB |
| Szybkość przesyłania danych: | 6 Gbit/s |
| Standardowe rozwiązania komunikacyjne: | Serial ATA III |
| MTBF (Średni okres międzyawaryjny): | 2000000 h |
| Rozmiar kieszeni dysku SSD: | 2.5" |
| Litografia procesora: | 20 nm |
| Pojemność pamięci SSD: | 300 GB |
| Technologia Intel® Rapid Start: | Nie |
| Technologia Intel® Smart Response: | Nie |
| Wersja technologii Intel® Smart Response: | 0.00 |
| Prędkość odczytu z nośnika: | 500 MB/s |
| UBER: | < 1 per 10^17 bits read |
| Typ pamięci: | MLC |
| Prędkość zapisu nośnika: | 315 MB/s |
| Litografia: | 20 nm |
| Obsługa S.M.A.R.T.: | Tak |
| Losowy odczyt (4KB): | 75000 IOPS |
| Losowy zapis (4KB): | 9000 IOPS |
| Segment rynku: | Serwer |
| Wibracje podczas pracy: | 2.17 G |
| Wibracje podczas przechowywania: | 3.13 G |
| Pobór mocy (bezczynny): | 0.65 W |
| Pobór mocy (zapis): | 5 W |
| Pobór mocy (odczyt): | 1.3 W |
| Opóźnienie zapisu: | 65 µs |
| Opóźnienie odczytu: | 50 µs |
| Technologia Enhanced Power Loss Data Protection: | Tak |
| Monitoring temperatury SSD: | Tak |
| Ochrona danych End-to-End Data Protection: | Tak |
| Random write (100% span): | 9000 IOPS |
| Status: | Discontinued |
| Rodzina produktów: | Centrum danych SSD |
| Ostatnia zmiana: | 63903513 |
| Data premiery: | Q2'13 |
| SSD ARK ID: | 75682 |
| Seria produktów: | Intel DC S3500 |
| Nazwa kodowa produktu: | Wolfsville |
| Odczyt sekwencyjny: | 500 MB/s |
| Szybkość zapise sekwencyjnego: | 315 MB/s |
| Szyfrowanie sprzętowe dysku SSD: | AES 256 bit |
| Zużycie prądu dysku SSD (tryb pracy): | 3.5W |
| Zużycie prądu dysku SSD (tryb bezczynności): | 0.9W |
| Dysk SSD - wstrząsy: | 1, 000 G (Max) at 0.5 msec |
| SSD jest przeznaczona do: | Centrum danych |
| Intel® High Endurance Technology (HET): | Nie |
| URL do instrukcji: | http://www.intel.com/content/www/us/en/solid-state-drives/ssd-dc-s3500-brief.html |
| Wytrzymałość dysku SSD: | 170 TBW |
| Technologia Intel Rapid Start wersja: | 0.00 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Intel DC S3500, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje dysk półprzewodnikowy (SSD) Intel
14 Września 2024
14 Września 2024
Instrukcje dysk półprzewodnikowy (SSD)
- dysk półprzewodnikowy (SSD) Corsair
- dysk półprzewodnikowy (SSD) Dahua Technology
- dysk półprzewodnikowy (SSD) ADATA
- dysk półprzewodnikowy (SSD) XPG
- dysk półprzewodnikowy (SSD) Elo
- dysk półprzewodnikowy (SSD) Transcend
Najnowsze instrukcje dla dysk półprzewodnikowy (SSD)
22 Czerwca 2024
31 Maja 2024
28 Maja 2024
27 Maja 2024
25 Maja 2024
9 Maja 2024