Instrukcja obsługi Insignia NS-PSJMCC

Insignia Niszczarka do papieru NS-PSJMCC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Insignia NS-PSJMCC (2 stron) w kategorii Niszczarka do papieru. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
SETTING UP YOUR SHREDDER
1 Place the shredder head securely on the included wastebasket. Make sure
that the safety interlock labels on the sides are aligned. If they are not,
your shredder will not work.
Caution: Your shredder has very
sharp, exposed blades on the
underside. Use care when setting
up your shredder. Do not use bags
to line your wastebasket.
2 Connect the power cord to a power outlet.
PACKAGE CONTENTS
• Countertop 6-Sheet Crosscut Mail Shredder
• Quick Setup Guide
FEATURES
Before using your new product, please read these instructions to prevent any damage.
Read
instructions
before use.
Avoid touching
the document
feed opening
with your
hands.
Never insert
your hand or
ngers into the
feed opening.
Product is
not intended
for use by
children
(product is
not a toy).
Do not spray
or keep any
aerosol
products in
or around
shredder.
Avoid loose
clothing or
jewelry
touching the
document
feed
opening.
Do not shred
paper with
paperclips. Do
not shred
gummed or
wet paper.
Insert one
credit
card into
the credit
card slot.
Avoid getting
your hair or face
near the
document feed
opening. Do not
let hair touch the
document feed
opening. Serious
injury may result.
Do not
exceed the
shredder’s
maximum
capacity of
3 vertically
folded
sheets of
letter size
paper.
WARNING
To avoid injury to
yourself and
others, please
follow safety
instructions
before operating
this device.
Quick Setup Guide | NS-PSJMCC
Countertop 6-Sheet Crosscut Mail Shredder
# ITEM
1 Shredder head
2 Document feed
opening
3 Switch
4 Ready LED indicator
5 Wastebasket
DESCRIPTION
Contains the control panel and the cutting
head.
Put paper (3 vertically folded sheets of letter
size paper) or a single credit card into this
opening to shred.
On/Auto ( | ) - Shreds items inserted into the
document feed opening, then stops.
O () - Turns o the shredder.
Rev () - Reverses the paper to clear a jam
or remove unshredded paper.
Lights green when the power is on.
Empty when 2/3 full.
On/Auto ReverseO
Ready
Side of shredder
USING YOUR SHREDDER
1 Slide the power switch to On/Auto.
2 Insert paper or one credit card into the document feed opening. You can
insert 3 vertically folded sheets of letter-sized paper at a time.
Note: Do not put paper clips, adhesive paper, or tape through the shredder.
3 If the shredder jams, slide the switch to to reverse the paper,Reverse
clear the paper jam, then slide the switch to On/Auto.
4 When the wastebasket is 2/3 full, slide the switch to OFF, unplug it from
the power outlet, then remove and empty the wastebasket. Replace the
wastebasket.
TROUBLESHOOTING
SPECIFICATIONS
IMPORTANT SAFETY INFORMATION
• Avoid touching the document feed opening with your hands.
• Keep pets and children away from the shredder.
• Keep loose clothing, jewelry, hair, and other personal items away from the
shredder.
• Unplug the shredder before cleaning or emptying the wastebasket.
• Do not place the shredder near a heat source or store in a humid
environment for long periods of time.
• Unplug the shredder if it will not be used for a long period of time.
• Do not use aerosol products near the shredder.
• Make sure that the power outlet is near the shredder and easily accessible.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
©2015 Best Buy. All rights reserved.
Made in China
V1 ENGLISH 15-0680
PROBLEM
Shredder does not
work after paper is
inserted.
Shredder does not
stop after shredding
has nished.
Shredder makes a
high noise.
Shredder does not
shred paper
SOLUTION
• Make sure that the power cord is plugged into a working power outlet.
• The motor may have overheated. Wait for about 30 minutes, then try again.
• The paper feed may be jammed. Slide the switch to reverse to remove any
jammed paper, then try again.
• The shredder head may not be placed correctly on the wastebasket. Make sure
that the safety interlock labels are aligned.
• The sensor may be jammed by paper. Unplug your shredder, then clean the paper
entry.
• Make sure that the shredder is on a at and stable surface.
• You may have inserted too much paper. Make sure that you do not insert more
than 3 vertically folded sheets of letter-sized paper at a time.
• The paper size may be larger than the paper entry. Reverse the shredder to
remove the paper.
• Make sure that the paper is straight as it enters the paper feed.
Cutting style
Entry width
Shred
capacity
Dimension
Cross cut
4.7 in. (120 mm)
Three vertically folded sheets
(75g/letter size paper)
1 credit card
7.1 × 7.1 × 8.6 in.
(180 × 180 × 219 mm)
Shred size
Duty cycle
Input
Net weight
Basket
capacity
.19 × 1.34 in. (5 × 34 mm)
2 mins ON / 30 mins OFF
AC120V, 60Hz, 1.1A
3.9 lbs. (1.8 kg)
0.8 gal (3 L)

Specyfikacje produktu

Marka: Insignia
Kategoria: Niszczarka do papieru
Model: NS-PSJMCC

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Insignia NS-PSJMCC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niszczarka do papieru Insignia

Insignia

Insignia NS-PSJMCC Instrukcja

1 Października 2024
Insignia

Insignia NS-PS06CC-C Instrukcja

1 Października 2024
Insignia

Insignia NS-PS06SC Instrukcja

1 Października 2024
Insignia

Insignia NS-PS06CC Instrukcja

1 Października 2024

Instrukcje Niszczarka do papieru

Najnowsze instrukcje dla Niszczarka do papieru

Fellowes

Fellowes Powershred 79Ci Instrukcja

15 Października 2024
GBC

GBC Momentum X26-32 Instrukcja

8 Października 2024
GBC

GBC AutoFeed+ 300M Instrukcja

8 Października 2024
GBC

GBC AutoFeed+ 150X Instrukcja

8 Października 2024
GBC

GBC Momentum X18-12 Instrukcja

8 Października 2024
GBC

GBC AutoFeed+ 300X Instrukcja

8 Października 2024
Fellowes

Fellowes Powershred C-525 Instrukcja

8 Października 2024
Bonsaii

Bonsaii S120-C Instrukcja

7 Października 2024
Bonsaii

Bonsaii C209-D Instrukcja

7 Października 2024
Bonsaii

Bonsaii 4S30 Instrukcja

7 Października 2024