Instrukcja obsługi Ikan LBX20

Ikan Ulga LBX20

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ikan LBX20 (6 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
support@ikancorp.com © 2017 ikan Corporation. All rights Reserved
www.ikancorp.com 713.272.8822
CHECKED BY
QUICKSTART GUIDE
LYRA DMX
Lyra Bi-Color Studio Light with DMX Control
What’s Included
1 x Lyra Bi-Color Studio Light Fixture
1 x Power supply
1 x Yoke Mount
1 x Power Cord
LBX20
Lyra 1 x 2 Bi-Color Studio Light with DMX Control
LBX30
Lyra 1 x 3 Bi-Color Studio Light with DMX Control
LBX40
Lyra 1 x 4 Bi-Color Studio Light with DMX Control
LBX20 LBX30
LBX40
General Information
Thank you for buying the Ikan Lyra Bi-Color DMX LED Lights. This fixture has been designed to perform reliably for years
when the guidelines in this booklet are followed. Please read and understand the instructions in this manual carefully and
thoroughly before attempting to operate this unit. These instructions contain important information regarding safety during use
and maintenance.
Every fixture has been throughly tested. Carefully check the shipping carton for damage that may have occurred during shipping.
If the carton appears to be damaged, carefully inspect your unit for damage and be sure all accessories necessary to operate
the unit have arrived intact. In the event damage has been found or parts are missing, please contact our customer support
team for further instructions. Please do not discard the shipping carton in the trash. Please recycle whenever possible.
Safety Instructions
This fixture is an extremely sophisticated piece of electronic equipment. To guarantee a smooth operation, it is important to
follow the guidelines in this manual. The manufacturer of this device will not accept responsibility for damages resulting from the
misuse of this fixture due to the disregard of the information printed in this manual.
This device falls under PROTECTION CLASS 1. It’s essential this device be grounded properly. Only qualified personnel should
perform all electrical connections.
For proper operation, follow the Installation guidelines described in this manual. Only qualified and certified personnel should
perform installation of this fixture and only the original rigging parts (yoke) included with this fixture should be used for installation.
Any modifications will void the original manufacturer’s warranty and increase the risk of damage and/or personal injury.
Never look directly into the light source of this fixture to prevent risk of injury to your retina, which may induce blindness.
Always disconnect from main power source before performing any type of service and/or cleaning procedure. Only handle the
power supply by the plug end, never pull out the plug by tugging the wire portion of the cord.
Do not operate this fixture if the power cord has become frayed, crimped and/or damaged. If the power cord is damaged,
replace it immediately with a new one of similar power rating.
INDOOR USE ONLY!
DO NOT EXPOSE TO RAIN AND/OR MOISTURE!
DO NOT PLUG FIXTURE INTO A DIMMER PACK!
General Guidelines
NEVER OPEN THIS FIXTURE WHEN IN USE!
Please make sure there are NO FLAMMABLE MATERIALS close to the fixture while operating, to prevent any fire hazard.
The fixture must be installed in a location with adequate ventilation, at least 1.5 feet (.5m) from adjacent surfaces. Be sure no
air ventilation slots are blocked.
DO NOT attempt installation and/or operation without knowledge of how to do so.
DO NOT permit operation by persons who are not qualified to operate this type of fixture. Most damages are the result of
operations by nonprofessionals. Consistent operational breaks may ensure the fixture will function properly for many years to
come.
DO NOT shake fixture and avoid using brute force when installing and/or operating the fixture.
Always install the fixture with an appropriate safety cable. When installing the fixture in a suspended environment, always use
correct mounting hardware that can be inserted into the Baby 1/8 in. or Junior 1-1/8 combo pin adapter.
Use the original packaging and materials to transport the fixture in for service.
Fixture Overview
LBX20
LBX30
LBX40

Specyfikacje produktu

Marka: Ikan
Kategoria: Ulga
Model: LBX20

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ikan LBX20, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ulga Ikan

Ikan

Ikan LWX8 Instrukcja

7 Października 2024
Ikan

Ikan LBX8 Instrukcja

7 Października 2024
Ikan

Ikan LBX20 Instrukcja

7 Października 2024
Ikan

Ikan LBX30 Instrukcja

7 Października 2024
Ikan

Ikan LBX5 Instrukcja

7 Października 2024
Ikan

Ikan RBX5 Instrukcja

7 Października 2024
Ikan

Ikan LBX40 Instrukcja

7 Października 2024
Ikan

Ikan RB10 Instrukcja

7 Października 2024
Ikan

Ikan OYB5 Instrukcja

7 Października 2024
Ikan

Ikan LBX10 Instrukcja

6 Października 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga

Goobay

Goobay 30780 Instrukcja

15 Października 2024
QTX

QTX DM-X12 Instrukcja

15 Października 2024
Livarno

Livarno IAN 94799 Instrukcja

15 Października 2024
Astro

Astro Denia Instrukcja

13 Października 2024
AFX

AFX Grace GRCP07CBBK Instrukcja

12 Października 2024
AFX

AFX Point PNTP0107L30D1BK Instrukcja

12 Października 2024
Neewer

Neewer TL97C Instrukcja

9 Października 2024
Neewer

Neewer SRP18C Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 005.824.56 Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 705.829.38 Instrukcja

9 Października 2024