Instrukcja obsługi Ikan LBX10

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ikan LBX10 (6 stron) w kategorii Verlichting. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
support@ikancorp.com © 2017 ikan Corporation. All rights Reserved
www.ikancorp.com 713.272.8822
CHECKED BY
What’s Included
1 x 15V Power supply
1 x Yoke Mount
LBX5
Lyra Bi-Color LED Half x 1 Soft Light with DMX
LBX10
Lyra Bi-Color LED 1 x 1 Soft Light with DMX
QUICKSTART GUIDE
LYRA DMX
Lyra Bi-Color DMX Flat Panel Light
General Information
Thank you for buying the ikan Lyra Bi-Color DMX512 LED Lights. This fixture has been designed to perform reliably for years
when the guidelines in this booklet are followed. Please read and understand the instructions in this manual carefully and
thoroughly before attempting to operate this unit. These instructions contain important information regarding safety during use
and maintenance.
Every fixture has been thoroughly tested. Carefully check the shipping carton for damage that may have occurred during
shipping. If the carton appears to be damaged, carefully inspect your unit for damage and be sure all accessories necessary
to operate the unit have arrived intact. In the event damage has been found or parts are missing, please contact our customer
support team for further instructions. Please do not return this unit to your dealer without first contacting customer support at
the number listed below. Please do not discard the shipping carton in the trash. Please recycle whenever possible.
Safety Instructions:
This fixture is an extremely sophisticated piece of electronic equipment. To guarantee a smooth operation, it is important to
follow the guidelines in this manual. The manufacturer of this device will not accept responsibility for damages resulting from the
misuse of this fixture due to the disregard of the information printed in this manual.
This device falls under PROTECTION CLASS 1. It’s essential this device be grounded properly. Only qualified personnel should
perform all electrical connections.
INDOOR USE ONLY!
DO NOT EXPOSE FIXTURE TO RAIN AND/OR MOISTURE!!
DO NOT PLUG FIXTURE INTO A DIMMER PACK!
For proper operation, follow the Installation guidelines described in this manual. Only qualified and certified personnel should
perform installation of this xture and only the original rigging parts (yoke) included with this fixture should be used for installation.
Any modifications will void the original manufacturer’s warranty and increase the risk of damage and/or personal injury.
Never look directly into the light source of this fixture to prevent risk of injury to your retina, which may induce blindness.
Always disconnect from main power source before performing any type of service and/or cleaning procedure. Only handle the
power supply by the plug end, never pull out the plug by tugging the wire portion of the cord.
Do not operate this fixture if the power cord has become frayed, crimped and/or damaged. If the power
cord is damaged, replace it immediately with a new one of similar power rating.
General Guidelines:
NEVER OPEN THIS FIXTURE WHILE IN USE!!
Please make sure there are NO FLAMMABLE MATERIALS close to the fixture while operating, to prevent any fire hazard.
The fixture must be installed in a location with adequate ventilation, at least 1.5 feet (.5m) from adjacent surfaces. Be sure no
air ventilation slots are blocked.
DO NOT attempt installation and/or operation without knowledge of how to do so.
DO NOT permit operation by persons who are not qualified to operate this type of fixture. Most damages are the result of
operations by nonprofessionals.
Consistent operational breaks may ensure the fixture will function properly for many years to come.
DO NOT shake fixture and avoid using brute force when installing and/or operating the fixture.
Always install the fixture with an appropriate safety cable. When installing the fixture in a suspended environment, always use
correct mounting hardware that can be inserted into the Baby 1/8 or Junior 1-1/8 combo pin adaptor." "
Use the original packaging and materials to transport the fixture in for service.
Fixture Overview (Front)
LBX5
LBX5
LBX10
LBX10
Fixture Overview (Back)

Specyfikacje produktu

Marka: Ikan
Kategoria: Verlichting
Model: LBX10

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ikan LBX10, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Verlichting Ikan

Ikan

Ikan LBX10 Instrukcja

6 Października 2024

Instrukcje Verlichting

Najnowsze instrukcje dla Verlichting

Light4Me

Light4Me SPECTRA BAR Instrukcja

6 Października 2024
Light4Me

Light4Me PARTY IV Instrukcja

6 Października 2024
Astera

Astera AX9 Instrukcja

6 Października 2024
ETC

ETC Unison Foundry Instrukcja

6 Października 2024
Ikea

Ikea SKYDRAG 905.291.10 Instrukcja

6 Października 2024
Ikea

Ikea MITTLED 304.536.41 Instrukcja

6 Października 2024