Instrukcja obsługi Iiyama WP D001HU

Iiyama Karta sieciowa/adapter WP D001HU

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Iiyama WP D001HU (2 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
M259A12
WIRELESS PRESENTATION
HDMI DONGLE
WP D001HU
User Manual
CHECKING THE CONTENTS OF THE PACKAGE
Wireless presentation HDMI Dongle
User Manual (this document)
NAME OF EACH PART
SPECIFICATIONS
Button
Indicator HDMI cable
USB cable
DEVICE REQUIREMENTS

Android receiver
- ESharePro app is installed and activated.
(Please refer to the online UM for detail support
models.)
-
Network : 2.4G/5G Wi-Fi hotspot or LAN or WLAN

Sender
- Windows PC : Win7 / Win8 / Win10
- MacBook : Mac OS 9.0 or later
- Chrome Book
- Linux
- Other devices with HDMI output available
Model Name WP D001HU
Video outputs HDMI 1.4, comply with HDCP
Frame Rate Up to 60 fps depending on environment (FHD)
Output resolution 720x480, 720x576, 1280x720,1920x1080(1080P)
Input resolution
Video: 480p, 576p, 720p, 1080p
PC timing: 640x480, 800x600, 1024x768, 1280x720,
1920x1080
Audio Stereo, Radio quality 16bits 48kHz
Wireless IEEE 802.11ac, 5GHz
IEEE 802.11n, 2.4GHz
Data rate wireless Up to 867Mbps
Authentication protocol WPA2(WPA2-PSK (Pre-Shared key) / WPA2-
Enterprise)
Security(encryption) WPA2
Support platform Windows, MAC10.15, Chrome
Any OS supports HDMI standard 1.4
Reach Max. 15m
Cable USB cable (type A), HDMI cable
LED 1 LED
Power Supply DC 5V, 0.65A
Power Consumption 3.25W
Temperature range
Operating: 0°C to +40°C (+32°F to +104°F)
Storage: -10°C to +60°C (+14°F to +140°F)
Humidity
Ope rating: 10% to 80 % relativ e humi dity, n on-
condensing
Storage: 5% to 90% relative humidity, non-
condensing
SAFETY PRECAUTIONS

Before using and operating this device, please read thoroughly and comply
with the following precautions in order to prevent accidents or mal-operations.

Do not charge or use the device in dusty or wet conditions, to prevent internal
circuit failure.

Keep the device away from heat sources such as an electric heater.

This device and its parts may contain some small components, so keep the
product out of reach of children to prevent accidents.

This device is not water-resistant, please keep it dry.

Please contact professional service personnel for maintenance services.

Do not insert any sharp or pointed object into the device.

Prevent the device from falls and collisions with other objects, which may
cause damages.

There are ventilation holes on back cover, do not spray water to it or use
damp cloth for cleaning.

Please call professional personnel for maintenance service.
Frequency Range Output Power (Max.)
2412 to 2472 MHz 15.88 dBm
5180 to 5240 MHz 13.26 dBm
5745 to 5825 MHz 13.22 dBm
RF&POWER
PAIRING SHARE SCREEN

Pair with Android Receiver
<Auto Pair>
Requirements :
2.4G/5G Wi-Fi hotspot is enabled on the Android
receiver. (Please refer to the online UM for detail
support models.)
1. Plug the dongle into the USB port on the Android
receiver, and the dongle will pair with the receiver
automatically.
Please don't unplug the dongle while
pairing.
2. "Saved!" is displayed when the dongle is paired.
Tap the [OK] button to fi nish.
3. Unplug the dongle from USB port on the Android
receiver.
NOTE
<Manually Pair>
Requirements :
Android receiver is connected with LAN or WLAN.
1. Plug the dongle into the USB port on the Android
receiver, and enter the Wi-Fi SSID and password
of your offi ce to associated with the receiver in the
pairing dialog.
Recommend that you write down your Wi-
Fi SSID and password. If the input is wrong,
the receiver and dongle cannot be paired.
2. Check if the network information is entered
correctly, and then tap the [SAVE] button.
3. "Saved!" is displayed when the dongle is paired.
Tap the [OK] button to fi nish.
4. Unplug the dongle from USB port on the Android
receiver.
NOTE

Indicator Status in Sharing
Blinking blue : The dongle is connecting
Permanent blue : The dongle is connected
Blinking red : The dongle fails to connect with the receiver

Share screen with Android Receiver
1.
Plug both USB and HDMI cables of the paired the dongle into the sender, the dongle indicator will blink in blue.
And wait for the indicator turns permanent blue.
2. Press the button on the dongle to start screen sharing. And press the button on the dongle again to stop
screen sharing.

Extend Screen
On the sender's operating system:
1) Go to the display settings.
2) Set the display mode as extended display
 
Hereby, iiyama Corporation declares that the radio equipment Type WP D001HU is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address: www.iiyama.com
CE Conformity for European Countries
This Wireless Presentation HDMI Dongle complies with the requirements of the EC/EU Directive 2014/53/EU
“Radio Equipment Directive”, and 2011/65/EU “RoHS Directive”.
The electro-magnetic susceptibility has gives correct operationbeen chosen at a level that in residential
areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the
buildings. All places of operation are characterised by their connection to the public low voltage power supply
system.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Following information is only for EU-member states
The mark shown to the right is in compliance with the Waste Electrical and Electronic
Equipment Directive 2012/19/EU (WEEE). The full text of the EU declaration of conformity is
available at the following internet address: www.iiyama.com
The mark indicates the requirement NOT to dispose the equipment as unsorted municipal
waste, but use the return and collection systems according to local law.

Indicator Status in Pairing
Blinking blue : The dongle is starting up or pairing
Permanent blue : The dongle is paired successfully
Blinking red : The dongle fails to pair with the receiver

Specyfikacje produktu

Marka: Iiyama
Kategoria: Karta sieciowa/adapter
Model: WP D001HU

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Iiyama WP D001HU, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Karta sieciowa/adapter Iiyama

Iiyama

Iiyama WP D001HU Instrukcja

7 Września 2024

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter

LevelOne

LevelOne FNC-0109TX Instrukcja

14 Października 2024
StarTech.com

StarTech.com ST1000SPEX2T Instrukcja

9 Października 2024
StarTech.com

StarTech.com ST1000SPEX2LT Instrukcja

9 Października 2024
StarTech.com

StarTech.com AF221CE-POE-INJECTOR Instrukcja

9 Października 2024
StarTech.com

StarTech.com USB3LINK Instrukcja

9 Października 2024
StarTech.com

StarTech.com PCMACLINK2 Instrukcja

9 Października 2024
StarTech.com

StarTech.com PEX1000SFP Instrukcja

9 Października 2024
StarTech.com

StarTech.com ST2GPEX Instrukcja

9 Października 2024
StarTech.com

StarTech.com USB56KEM2 Instrukcja

9 Października 2024
StarTech.com

StarTech.com PUSBADAP Instrukcja

9 Października 2024