Instrukcja obsługi IHome Lux Power iCVBTW11

IHome głośnik Lux Power iCVBTW11

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IHome Lux Power iCVBTW11 (1 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/1

FCC INFORMATION

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

CAUTION : Exposure to Radio Frequency Radiation.

This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and

your body.

• Warning: Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3 (B)/NMB-3(B), CAN RSS216 / CNR-216

Canada Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic

Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102

RF exposure, users can obtain Canadian information on RF exposure and compliance.

This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

L’émett eur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences

et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitat ion est autorisée

aux deux conditions suivantes :

(1) L’appareil ne doit pas produire de brouillage;

(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre

le fonctionneme nt.

Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à

l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.

Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.

Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 ét ablies pour un environnement non

contrôlé.

WARRANTY

For product support information and warranty please visit:

www.ihome.com/support

Questions? Visit www.ihome.com

Model: iCVBTW11 QSG

Instruction manual - US English

size: 408mm(W) x 150mm(H)

Folded Size: 102 x 150 mm

157g Art paper / 1C + 1C / Straight corners

Dec 13, 2019

FEATURES & FUNCTIONS

54 iCVBTW11-191213-A(EN) Printed in China

QUESTIONS? visit www.ihome.com

Model: iCVBTW11

FCC ID: EMOICVBTW11A

IC: 986B-ICVBTW11A

Quick Start Guide

GETTING STARTED

Connect the included AC adapter to the DC jack located on the back

of the unit and connect the other end to a working wall outlet.

Connecting the Unit

IMPORTANT SAFETY INSTRUCTIONS

When used in the directed manner, this unit has been designed and manufactured to

ensure your personal safety. However, improper use can result in potential electrical

shock or ﬁre hazards. Please read and follow all safety and operating instructions careful-

ly before installation and use, and keep these instructions handy for future reference. Take

special note of all warnings listed in these instructions and on the unit.

1. Water and Moisture – The unit should not be used near water. For example: near a

bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.

2. Ventilation – The unit should be situated so that its location or position does not

interfere with its proper ventilation. For example, it should not be situated on a bed,

sofa, rug or similar surface that may block ventilation openings. Also, it should not be

placed in a built-in installation, such as a bookcase or cabinet, which may impede the

ﬂow of air through the ventilation openings.

3. Heat – The unit should be situated sources such as radiators, heat away from heat

registers, stoves or other appliances (including ampliﬁers) that produce heat.

4. Power Sources – The unit should be connected to a power supply only of the type

described in the operating instructions or as marked on the appliance. Only use the

AC adapter that came with the unit.

5. Power-Cable Protection – Power supply cables should be routed so that they are not

likely to be walked on or pinched by items placed upon or against them. It is always

best to have a clear area from where the cable exits the unit to where it is plugged into

an AC socket.

6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance

section for cleaning instructions.

7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids

are not spilled into any openings or vents located on the product.

8. Attachments – Do not use attachments not recommended by the product manufac-

turer.

9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and

disconnect the antenna or cable system during a lightning storm or when it is left

unattended and unused for long periods of time. This will prevent damage to the

product due to lightning and power-line surges.

10. Damage Requiring Service – The unit should be serviced by qualiﬁed service person-

nel when:

A. the power supply cable or plug has been damaged.

B. objects have fallen into or liquid has been spilled into the enclosure.

C. the unit has been exposed to rain.

D. the unit has been dropped or the enclosure damaged.

E. the unit exhibits a marked change in performance or does not operate normally.

11. Periods of Nonuse – If the unit is to be left unused for an extended period of time,

such as a month or longer, remove batteries before storage

12. Servicing – The user should not attempt to service the unit beyond those methods

described in the user manual. Service methods not covered in the operating instruc-

tions should be referred to qualiﬁed service personnel.

13. Magnetic Interference: This product’s speakers contain powerful magnets which

could cause interference or damage to sensitive equipment such as hard drives, CRT

televisions and monitors, as well as medical, scientiﬁc, and navigational devices. Keep

this unit away from these products at all times.

14. Only use attachments/accessories speciﬁed by the manufacturer. This product is

suitable for use in tropical and/or moderate climates.

15. No naked ﬂame sources, such as lighted candles, should be placed on the apparatus.

16. WARNING: To reduce the risk of ﬁre or electric shock, do not expose this product to

rain or moisture

17. The mains plug of power adaptor is used as the disconnect device, it shall remain

readily operable.

18. Clean only with dry cloth.

This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Connecting to Bluetooth

• Press the Power Button to turn the vanity speaker ON.

• Turn on your Bluetooth device and make it ‘discoverable’ by

turning on Bluetooth mode.

• Press and hold the Bluetooth Pairing Button on the vanity speaker

for 2 seconds to enter pairing mode.

• Select ‘LUX POWER’ on your device’s Bluetooth menu to connect!

LUX

POWER

Vanity Speaker + Wireless Charging

RESET

TEST

USB Port

(5V/1A)

Home Beaut

LUX POWER

WHAT’S INCLUDED:

AC Adapter

LUX POWER

Vanity Speaker

DC Jack

(9V/3.6A)

USB

Power Button

Press to turn vanity speaker ON or OFF

Light Button

• Press to turn mirror light ON or OFF

• Press repeatedly to adjust light modes

Bluetooth Pairing Button

• Press and hold to enter pairing mode

• Select ‘LUX POWER’ on your device to connect

Play/Pause/Speakerphone Button

• Press to play/pause Bluetooth audio

• Press to answer/end Bluetooth calls

• Press and hold to reject an incoming call

• Press and hold to activate Siri/Google

USB Charging Port (1A)

Connect a standard USB cable (not included)

to charge devices

DC Jack

Connect included AC adapter to power source

WIRELESS CHARGING

Wireless Charging LED

ADJUSTING LIGHT MODES

Wireless Charging LED

White LED indicates wireless charging status (see page 5)

Bluetooth Pairing LED

• Flashes white to indicate when unit is in pairing mode

• Glows solid white to indicate Bluetooth is connected

Using the Stem

• Tap the stem to turn the light ON or OFF.

• Tap the stem repeatedly to cycle

through brightness levels:

High, Mid, Low, and OFF.

Using the Light Button

• Press the Light Button to turn the mirror

light ON or OFF.

• Press the Light Button repeatedly to

cycle through brightness levels: High,

Mid, Low, and OFF.

Charging will begin upon contact. The Wireless Charging LED

located on the front of the mirror will indicate charging status:

CHARGING VIA USB PORT

• Connect a standard USB cable (not

included) to the USB Charging Port

located on the back of the mirror.

• Connect the other end to your device to

begin charging.

Supports:

• Qi compatible phones (also works with plastic cases up to 3mm thick)

• Apple AirPods

Place Qi compatible device face-up on the charging rest located

on the base of the mirror as shown below. Make sure the center of

the device is aligned over the center of the charging rest.

Rapid blinking LED: Device is not charging (reposition device)

Slow blinking LED: Device is charging

Solid LED: Device is fully charged

(LED may continue to blink slowly when iOS devices are fully charged.)

CAUTION: Remove phone’s metal protective case before charging.

Do not place magnetic or metal objects on charger during charging.

Qi compatible phones with metallic looking ﬁnishes will charge

normally.

Note: The wireless charging process generates heat that may cause

phones and chargers to be warm to the touch. This is natural for

wireless charging devices.

Removable Detail Mirror

The back of the 10x magnifying

detail mirror has SimpleStick™

micro suction material for easily

attaching and detaching almost

anywhere. If necessary, clean

SimpleStick material with oce

tape.

Cleaning Cloth

Use the included cleaning cloth

to keep the large surface and

detail mirror smudge free.

Model: iCVBTW11

Note: If no audio is playing for 15 minutes, the unit will automatically power o.

Note: Power and Light features operate separately:

• Press the Power Button to access audio features including Bluetooth.

• Press the Light Button to access light modes and brightness levels.

Specyfikacje produktu

Marka:	IHome
Kategoria:	głośnik
Model:	Lux Power iCVBTW11

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IHome Lux Power iCVBTW11, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje głośnik IHome

IHome Zenergy Sunrise Instrukcja

16 Września 2024

IHome Playpro iBT700 Instrukcja

16 Września 2024

IHome PlayGlow Mini IBT800 Instrukcja

16 Września 2024

IHome TIMEBASE iBTW20 Instrukcja

15 Września 2024

IHome iBT85 Instrukcja

15 Września 2024

IHome iBT76 Instrukcja

15 Września 2024

IHome iBT65 Instrukcja

15 Września 2024

IHome iBT59 Instrukcja

15 Września 2024

IHome LUX II iCVBT8 Instrukcja

15 Września 2024

IHome iZBT4 Instrukcja

15 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025

ION Insta Sound Instrukcja

15 Stycznia 2025

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025

Yamaha WX-010 Instrukcja

15 Stycznia 2025

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025