Instrukcja obsługi IDIS DA-PI1101

IDIS Karta sieciowa/adapter DA-PI1101

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IDIS DA-PI1101 (8 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
DA-PI1101
PoE Injector
IEEE 802.3at PoE
Power Source Injector,
10/100Mbps LAN
Operation Manual
Powered by
2
Before Using the Product
FCC Compliance Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at
his own expense.
User’s Caution Statement
Caution: Any changes or modifications to the equipment not expressly approved by the
party responsible for compliance could void your authority to operate the equipment.
Product Overview
DA-PI1101 is a single port PoE Power Source (PSE) injector that supplies 48V DC power
to a remote network camera via a UTP Ethernet cable. It offers outstanding reliability with
low power consumption and long life span. It is capable of transmitting maximum of 30W
of output for up to 100 meters.
DA-PI1101 is IEEE802.3af and IEEE 802.3at-compliant. It is also equipped with a circuitry
for preventing damages to the device when non-standard or low-voltage PoE devices are
connected to ensure safe operations.
3
Product Features
●Up to 30W of PoE Power Feeding on 2-pairs
●Compatible with IEEE 802.3af/at
●Protects low power devices to receive only the power they need
●Automatic detection and protection of non–standard Ethernet terminals
●Supports 10/100Base-T LAN environment
●Parallel slide-in design to ease the installation
Accessories
The product consists of the following components.
AC/IN 100-240V
Main Unit (DA-PI1101) AC power cable
(conventional 220V)
Operation Manual

Specyfikacje produktu

Marka: IDIS
Kategoria: Karta sieciowa/adapter
Model: DA-PI1101

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IDIS DA-PI1101, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Karta sieciowa/adapter IDIS

IDIS

IDIS DA-PI1101 Instrukcja

3 Października 2024

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter

LevelOne

LevelOne FNC-0109TX Instrukcja

14 Października 2024
StarTech.com

StarTech.com ST1000SPEX2T Instrukcja

9 Października 2024
StarTech.com

StarTech.com ST1000SPEX2LT Instrukcja

9 Października 2024
StarTech.com

StarTech.com AF221CE-POE-INJECTOR Instrukcja

9 Października 2024
StarTech.com

StarTech.com USB3LINK Instrukcja

9 Października 2024
StarTech.com

StarTech.com PCMACLINK2 Instrukcja

9 Października 2024
StarTech.com

StarTech.com PEX1000SFP Instrukcja

9 Października 2024
StarTech.com

StarTech.com ST2GPEX Instrukcja

9 Października 2024
StarTech.com

StarTech.com USB56KEM2 Instrukcja

9 Października 2024
StarTech.com

StarTech.com PUSBADAP Instrukcja

9 Października 2024