Instrukcja obsługi Humminbird Helix 12 Chirp GPS G2N
Humminbird
echosonda wędkarska
Helix 12 Chirp GPS G2N
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Humminbird Helix 12 Chirp GPS G2N (39 stron) w kategorii echosonda wędkarska. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/39
HELIX® SERIES
Operations Summary Guide
SAFETY INFORMATION! You must read the Important Information
about your Humminbird® Product insert (included with your control head)
before proceeding with this operations summary guide.
FEATURES: A transducer is required to enable sonar, and a GPS fix is re-
quired to enable navigation. Your control head may not have all the features
described in this guide. Also, the illustrations may not look exactly like the
screens on your control head, but your unit will operate in a similar way. See
our Web site at for compatibility and purchasing infor-humminbird.com
mation.
SD OR MICROSD CARDS: Your control head may be compatible with ei-
ther an SD card or a microSD card. Please see your control head operations
manual for compatibility details.
OPERATIONS MANUALS: The complete operations manuals for your
control head and accessories are available on our Web site at
humminbird.com. Also, see Manage your Humminbird: Use Manuals
on your Device for more information.
ChartSelect®, CoastMaster®, Down Imaging®, Fish ID+™, HELIX®, Humminbird®, LakeMaster®,
Side Imaging®, and SwitchFire® are trademarked by or registered trademarks of Johnson Outdoors Marine
Electronics, Inc.
Adobe, Acrobat, Adobe PDF, and Reader are either registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by Johnson Outdoors, Inc. is under license. Other trademarks and trade names are
those of their respective owners.
microSD and SD are trademarks or registered trademarks of SD-3C, LLC in the United States, other countries
or both.
Navionics® is a registered trademark of Navionics S.p.A.
© 2021 Johnson Outdoors Marine Electronics, Inc. All rights reserved.
Table of Contents
Key Functions Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Menu Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setting up the Control Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Sonar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Side Imaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Down Imaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Manage your Humminbird . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Contact Humminbird . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
532403-4_B
Getting STARTED
Power On/Off
Select the Start-Up Mode
Press the MENU key once while the control head is powering on.
On the Water: If a transducer is connected to the control head, Normal
mode will be selected automatically. If a transducer is not connected,
select Normal, and press the RIGHT Cursor key.
Review System Connections: System Status Select and then press the
VIEW key until Accessory Test View is displayed on-screen. During Normal
mode, open the Views X-Press Menu > System > Accessory Test.
NOTE: If the control head is on a network, see your accessory manual
for more connection information.
ON: Press Once OFF: Press and Hold
Accessory Test View
Review System Connections: If a connected accessory is shown as
unconnected, confirm the cable or network connections.
4Getting Started
SETTING UP the Control Head
Your control head settings should be changed based on the area you are fishing,
water conditions, bottom, and weather conditions. It is also important to set up
system alarms. Some of the menus in this section are provided in the Quick
Setup Menu the first time you power on the unit.
Set the Menu System to Angler or Custom
Main Menu > Setup tab > User Mode
• Select to see greater simplicity and fewer menu choices. Angler
• Select to see all the menus available in the menu system. Custom
Set the Language
Main Menu > Setup tab > Language
The available languages are determined by your control head model.
WARNING! Do NOT enable Asian Mode if you do not require Asian
languages. Before you select Asian Mode, contact Humminbird Technical
Support for important information.
Set the Maximum Depth
Main Menu (Custom) > Sonar tab > Max Depth
Set the maximum depth of the body of water.
• Select Auto for the control head to acquire bottom readings as needed
(within the capabilities of the unit).
• Select the body of water depth so the control head will not attempt
to acquire sonar data below that depth, allowing more detail to be
shown on the screen.
NOTE: Side Imaging units default to the Side Imaging range setting if the
SI Range is set deeper than Max Depth. (Side Imaging X-Press Menu > SI
Range)
Select the Water Type
Main Menu (Custom) > Sonar tab > Water Type
Water Type configures your unit for operation in fresh or salt water. In salt
water, you can also choose the shallow or deep setting. Water Type affects
the accuracy of deep water depth readings.
• select Salt (deep).If the depth is more than 330 ft (100 m),
5
Setting up the Control Head
Select an Accessory Transducer (optional)
Main Menu > Sonar tab > Connected Transducer
The control head will automatically select the transducer that was included
with your control head. If a compatible accessory transducer is connected
to the control head, select it from the Connected Transducer menu, so the
related menus and views are added to the system.
Select the Units of Measurement
Main Menu > Data Sources tab > Units > Depth, Distance, etc.
(G4N models)
Main Menu > Setup tab > Units - Depth, Units - Distance, etc.
(all other models)
Select the units of measurement format for your control head.
Turn On/Off Sounds
Main Menu > Setup tab > Sound Control
If you are using alarms, but don’t want key sounds, it is important to
select Alarms Only to receive an audio alert when an alarm is triggered.
Adjust the Backlight and Background
Press the POWER/LIGHT key during operation.
• Select Light. Adjust the Backlight:
• Select Background. Change the Background:
Pair a Phone with the Control Head
If you have a -supported control head, you can pair a phone with Bluetooth
it using wireless technology. Bluetooth
1Select the Main Menu > Accessories tab.
2Select Phone Bluetooth > Connect New Phone. Press the RIGHT Cursor
key.
Follow the on-screen prompts to start the pairing process.
3When the phone name displays in the menu, select it. Press the RIGHT
Cursor key.
4When prompted, tap Pair on your phone.
In your phone Settings menu, turn on Show Notifications.
6Setting up the Control Head
Display Digital Readouts
Main Menu (Custom) > Setup tab > Digital Readouts
Digital Readout data can be displayed on-screen as an overlay or in data
boxes. The format and readouts you choose will be applied to all views.
• Select Overlay to display preset digital readouts as an overlay on the
view.
• Select Boxes to display digital readouts in boxes on the view. You can
select the readouts to be displayed in each box (see Select Digital
Readouts).
• Select to hide the digital readouts. Off
Sonar View with Digital Readouts Set to Overlay
temperature
speed
depth
10 Views
Change the Color Palette
Sonar X-Press Menu > Sonar Colors
The palette you choose will be applied to the Sonar View, Sonar Zoom
View, Split Sonar View, and Sonar Combo Views.
Select the Bottom View Display
Main Menu > Sonar tab > Bottom View
Select the method used to represent bottom and structure on the display.
• WhiteLine highlights the strongest sonar returns in white.
• Structure ID represents the strongest returns as specified by the selected
color palette.
Changing the Color Palette in Sonar View
sonar
colors
menu
Sonar View with Bottom View Set to WhiteLine
14 Sonar
SIDE IMAGING Display Settings
You can use the default settings included with your control head, or you can
customize the Side Imaging display.
Change the Color Palette
Side Imaging X-Press Menu > SI Colors
Select the color palette to use for the Side Imaging Views.
Adjust the Side Imaging Range
Side Imaging X-Press Menu > SI Range
SI Range sets the deepest range that will be displayed by the Side Imaging
View.
• The range will automatically adjust to follow the bottom. Auto:
• Manual: Select a low range setting to focus on a shorter distance of
the water column and show greater detail on the screen. Select a higher
range setting to view farther into the water and see an overview of
details on the screen.
Adjusting the SI Range
SI RangeSI Range
19
Side Imaging
Specyfikacje produktu
| Marka: | Humminbird |
| Kategoria: | echosonda wędkarska |
| Model: | Helix 12 Chirp GPS G2N |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Humminbird Helix 12 Chirp GPS G2N, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje echosonda wędkarska Humminbird
1 Września 2024
1 Września 2024
1 Września 2024
1 Września 2024
1 Września 2024
1 Września 2024
1 Września 2024
1 Września 2024
2 Czerwca 2024
2 Czerwca 2024
Instrukcje echosonda wędkarska
Najnowsze instrukcje dla echosonda wędkarska
23 Maja 2024
17 Maja 2024
16 Maja 2024
14 Maja 2024
13 Maja 2024
11 Maja 2024
10 Maja 2024
8 Maja 2024
6 Maja 2024