Instrukcja obsługi HSM BS10Cs
HSM
Niszczarka do papieru
BS10Cs
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla HSM BS10Cs (3 stron) w kategorii Niszczarka do papieru. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/3
IMPORTANT SAFETY NOTES
Do not shred envelopes or labels with a sticky substance like glue. Do not
shred CD/DVD, credit cards, wet paper, carbon paper or vinyl bags. The
shred will stick in the cutters and may cause paper jams or lower shredding
performance.
Empty the wastebasket regularly to prevent paper jams.
Do not operate if the power cord appears damaged. Do not alter this unit or
cord in any way.
Do not place this shredder near water or any heat source. Keep 6 inches
away from wall.
Do not use any oil or lubricants not clearly specified for shredder use in or
around this unit. Some agents may combust causing serious injury.
If an extension cord is used, make sure that the total ampere ratings of the
products plugged into the extension cord do not exceed the extension cord
ampere rating, and that the total of all products plugged into the wall outlet
does not exceed 15 amps.
This shredder should be used only with an operator in attendance. Keep
shredder in the ON/OFF position and unplug from the AC outlet when not in
use for an extended period of time.
Avoid exposing the shredder to direct sunlight.
TECHNICAL DATA
Part Number: HSM1053
Security Level: 3
Shred Size: 35mm)(cross cut) 5/32” x 1 3/8” (4mm x
Throat: mm) 8.9” (226
Maximum Capacity: 10 sheets
Shred Bin Capacity: 5 gallons (18,9 liters)
Voltage: 115 V/60 Hz
Noise level: 58 dB
Weight: 17 lbs. (7,7 ) kg
Continuous run time
Note: In order to maintain the machine, we suggest using it for 120 minutes on and
30 minutes off.
INSTALLATION:
-Unpack and set the machine upright on level surface.
-Make sure the waste bin is properly inserted into the shredder cabinet.
-Plug in the machine. See “TECHNICAL DATA” for necessary precautions.
-The outlet should be installed near the equipment and be easily accessible.
The main connection at the machine must be freely accessible.
MAINTENANCE INSTRUCTIONS
To ensure proper operation and function, periodic oiling of the cutting system is
required. Failure to oil your cutting system could result in reduced sheet capacity
performance, excess noise, paper jams and possible machine failure.
Run the machine in reverse after every 15-30 minutes of continuous use while
applying a thin strip of oil to the cutting head.
-Squeeze the lubricant across the full width of the cutters.
-Clean the shredder housing using a soft cloth dampened with a mild solution of
detergent (such as dish washing liquid) and warm water. DO NOT use chemical
cleaners or solve s. nt
CLEANING PHOTO EYE SENSORS
1. Unplug your machine for your safety –
2. Lift CD Flap on machine (If no flap installed, disregard this line and continue
on) Note: In the center of the paper slot, you should see (2) transparent
squares - one on either side of the slot.
3. Use compressed air or take a dry tissue or paper towel and wipe back and
forth a few times just to dust that area off
4. Replace flap if necessary
5. Plug machine back in
Turn off and unplug the shredder before moving, emptying the waste
bin, or if the shredder will not be used for a long period of time.
Keep children and pets away from shredder.
Do not place fingers, hands or any foreign objects in the feed slot.
Serious injury may result.
Keep ties, jewelry, hair and loose clothing away from the feed slot.
Serious injury may result.
Do not use canned air on shredder. Never use aerosol, petroleum
based or other flammable products on or near shredder.
Do not exceed the recommended paper capacity of 10 sheets. One
folded sheet of paper equals 2 sheets. An occasional paper clip or
metal staple is allowed.
Specyfikacje produktu
| Marka: | HSM |
| Kategoria: | Niszczarka do papieru |
| Model: | BS10Cs |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z HSM BS10Cs, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niszczarka do papieru HSM
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
Instrukcje Niszczarka do papieru
- Niszczarka do papieru Fellowes
- Niszczarka do papieru Black & Decker
- Niszczarka do papieru Marquant
- Niszczarka do papieru Digitus
- Niszczarka do papieru Camry
- Niszczarka do papieru Aurora
- Niszczarka do papieru Dahle
- Niszczarka do papieru Genie
- Niszczarka do papieru Rexel
- Niszczarka do papieru Olympia
- Niszczarka do papieru Hama
- Niszczarka do papieru Duronic
- Niszczarka do papieru Insignia
- Niszczarka do papieru Tracer
- Niszczarka do papieru Media-Tech
- Niszczarka do papieru Sencor
- Niszczarka do papieru Suntec
- Niszczarka do papieru Ideal
- Niszczarka do papieru Acco
- Niszczarka do papieru Q-CONNECT
- Niszczarka do papieru United Office
- Niszczarka do papieru Exibel
- Niszczarka do papieru Deli
- Niszczarka do papieru Eldom
- Niszczarka do papieru Kensington
- Niszczarka do papieru Ednet
- Niszczarka do papieru Royal Sovereign
- Niszczarka do papieru GBC
- Niszczarka do papieru Peach
- Niszczarka do papieru Primo
- Niszczarka do papieru Conrad
- Niszczarka do papieru DESQ
- Niszczarka do papieru Leitz
- Niszczarka do papieru Kobra
- Niszczarka do papieru Acco-Rexel
- Niszczarka do papieru Swordfish
- Niszczarka do papieru Kogan
- Niszczarka do papieru Monolith
- Niszczarka do papieru Brasq
- Niszczarka do papieru Qoltec
- Niszczarka do papieru D-Mail
- Niszczarka do papieru OTTO
- Niszczarka do papieru Bonsaii
Najnowsze instrukcje dla Niszczarka do papieru
15 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024