Instrukcja obsługi Hozelock FLOWMAX 7500

Hozelock Pompa wodna FLOWMAX 7500

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hozelock FLOWMAX 7500 (6 stron) w kategorii Pompa wodna. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/6

ZI Nord Arnas

BP 30424

69653 Villefranche Cedex

hozelock exel@hozelock exel.com- -

SAS au capital de 2600000€

SIRET 77965877200024 APE 2830 Z-

RCS Villefranche B

N° TVA intra communautaire : FR 02 779 658 772 -

HOZELOCK-EXEL

FLOOD PUMP

03/2018

FLOWMAX 7500

Réf. : 584990

Read before use.

Don’t use or store the apparatus at

ambient air temperatures under 5°C

Don’t use or store the apparatus at

ambient air temperatures over 40°C

Risk of electric shock

Some parts can be recycled

Dispose in a suitable collection

facility

Special warning, read carefully

CONTENTS

1 - Safety Measures……………………….... p.2

2 - Area of application……………………..... p.2

3 - Technical characteristics and

performance ………………………………....... p.3

4 - Description ............................................... p.3

5 - - Preparation First use ……………………. p.3

6 - Maintenance and storage.......................... p.4

7 - Operation faults / solutions ………………. p.4

8 - Warranty ................................................... p.5

9 - EC declaration of conformity……………... p.5

Illustrations and performance curve…………. p.5

For safety reasons, this appliance can be

used by children aged from 8 years and

above and persons with reduced physi-

cal, sensory or mental capabilities or lack

of experience and knowledge if they have been

given supervision or instruction concerning use

of the appliance in a safe way and understand the

hazards involved. Children shall not play with the

appliance. Cleaning and user maintenance shall

not be made by children without supervision.

1 - SAFETY MEASURES

READ CAREFULLY BEFORE USE

The user is responsible to third parties for all matters

resulting in the use of the pump (electrical, hydraulic

installation, etc ...). In France, comply with standard

NF C15 100 of 07/00, which governs low voltage -

electrical installations. In other countries, comply with

local regulations.

Before using the pump, it is therefore advisable to

have an experienced electrician check that the neces-

sary safety measures on the electrical network are

observed.

The supply characteristics indicated on the pump

rating plate must correspond to the characteristics of

the electrical network.

For safety reasons, the electrical network that powers

your pump must be equipped with a differential circuit

breaker and grounded plugs.

When using the pump in a garden pond or similar

areas, the power supply must be equipped with a

residual current device (RCD) having a rated residual

operating current not exceeding 30 mA.

If you add an extension cord, it must be of type H05

RNF with the same section as the power cable of

your pump, with a waterproof connection plug.

Never carry the pump by the power supply

cable (C) or the float (B), but by the carrying

handle (F).

This pump is intended for prolonged use, however it

is not recommended to operate it for more than 2h

without stopping and cooling it.

Do not make any changes to the pump. Do

not modify or attempt to access the pump in

any way.

If the appliance or the supply cord is dama-

ged, it must be repaired by manufacturer, its service

agent or qualified person.

Our guarantee is excluded for the normal wear of the

material, deterioration or accidents resulting from a

faulty and abnormal use of the equipment, or due to a

modification of the pump or an intervention on the

electric part.

In case of non compliance with the instruc--

tions, the user incurs a risk that can lead to

electrocution.

2 - AREA OF APPLICATION

Hozelock evacuation pumps are intended for private,

domestic use. They allow clean water or water with

particles up to 15 mm to be evacuated or transferred.

This pump is not designed to be used in a swimming

pool.

The temperature of the water drawn must not exceed

35°C.

THIS PUMP MUST NOT BE RUN DRY

Important: this pump is not suitable for

evacuating salt water, corrosive products,

inflammable, explosive or food related -

liquids or foodstuffs.

Do not dispose of electrical appliances as

unsorted municipal waste, use separate

collection facilities. Contact you local go-

vernment for information regarding the

collection systems available.

If electrical appliances are disposed of in landfills or

dumps, hazardous substances can leak into the

groundwater and get into the food chain, damaging

your health and well being.-

When replacing old appliances with new ones, the

retailer is legally obligated to take back your old ap-

pliance for disposals at least free of charge.

The pump's packaging is 80% recyclable.

The appliance and its accessories contain

materials (including plastics) that can be

recycled.

4 - DESCRIPTION (fig.1)

A - Pump Body

B - Float

C - Power cable

D - Fastening hook

E - Outlet port (G 1¼")

F - Carry handle

G - Multistage straight connector

H - User manual

I - Reversible base

J - Base fixing screw

K - High flow coupling

L - Cable support

5 - - PREPARATION FIRST USE

- Connection of the discharge hose:

Ensure that gasket is fitted

Screw the multi stage straight connector (G) onto the -

outlet (E), not forgetting the flat gasket supplied.

The stepped discharge connection (G) allows (fig.2):

- The fitting of hoses 25 mm and 32 mm in diameter,

- Or the screwing of a 1” female tap nose and the

quick connection of suitable hose fittings,

- - Or the use of a supplied high speed connection (K).

Cut off the end of the unused fitting (Fig.2).

- Adjusting the float:

To operate correctly, the float must not be

left completely free but must be placed in the

mounting hook (D, Fig.3). Otherwise, the

pump may not stop in the absence of water, causing a

risk of overheating which may cause injury to the

user.

You can adjust the length of the float cable to vary the

pump trip and stop level (Fig.3) by adjusting the free

cable length (jamming in hook D).

Attention: to ensure proper float operation, at

least 10 cm of free cable must be left bet-

ween the base of the float plug and the

attachment on the pump body.

- Installation:

Depending on the nature of the drained water, posi-

tion the reversible base (I) in the dirty water position

(Fig.4.1) or in the clean water position (Fig.4.2). To do

this, unscrew the 2 screws (J) using a suitable tool,

then position the base in the desired position (this is

also indicated on the base itself), and reattach it using

screws.

Lower the pump using a rope attached to the carrying

handle, and position it by checking that the float has

enough space to move freely.

- Starting up:

Make sure nothing restricts the backflow of water from

the pump (for example, kinked hose). Connect the

pump to the power supply after making sure that the

safety measures are followed.

The pump starts automatically once the level of water

required is achieved (float in the high position) and

stops when the water level is low enough (float in the

low position), depending on the setting made previou-

sly (fig.3).

The priming height depends on the position of the

reversible base. In the "clean water" position, this

height can be lowered thanks to the presence of a

non-return valve. Simply fill the pump via the drain

hose (pump off), or run once to allow priming with 5

mm of residual water.

It is also possible to clip the float directly to the ON

position (float at the top) or OFF position (float down)

without taking into account the height of water (fig.5).

The pump is not intended for continuous use or for

dry running. Otherwise, the pump may overheat and

may cause injury to the user. Do not leave unat-

tended.

Flowmax 7500

Electrical data 220- - -240V~ 50Hz 350 W (max.)

Max. flow 7500 l/h (min.)

Max. pressure 0.45 bar (min.)

Max. head 4.5 m (min.)

Max. immersion depth 7 m

Power cable H05 RNF 10m min. -

Level of protection IPX8

3 - TECHNICAL SPECIFICATIONS AND PERFORMANCE

See performance curve (page 5)

Values are given ±10%

Specyfikacje produktu

Marka:	Hozelock
Kategoria:	Pompa wodna
Model:	FLOWMAX 7500

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hozelock FLOWMAX 7500, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Pompa wodna Hozelock

Hozelock Flowmax 10200 7604 Instrukcja

25 Września 2024

Hozelock Jet 3500/20 Automatic 7610 Instrukcja

25 Września 2024

Hozelock 1800 Instrukcja

25 Września 2024

Hozelock JET 3000 K7 Instrukcja

24 Września 2024

Hozelock Tecnodive 6000 Instrukcja

24 Września 2024

Hozelock FLOWMAX 7500 Instrukcja

24 Września 2024

Hozelock Jet 3500/20 Automatic Instrukcja

24 Września 2024

Hozelock EasyClear 3000 Instrukcja

3 Września 2024

Hozelock EasyClear 9000 Instrukcja

7 Sierpnia 2024

Hozelock 3538 Instrukcja

6 Sierpnia 2024

Instrukcje Pompa wodna

Najnowsze instrukcje dla Pompa wodna

Dimplex WI 22 TE Instrukcja

11 Października 2024

DAB FEKA Instrukcja

9 Października 2024

Einhell BG-DP 3730 Instrukcja

9 Października 2024

Einhell Royal RHW 1000 Niro Instrukcja

9 Października 2024

Einhell Royal HW 811 Instrukcja

9 Października 2024

Einhell Royal GP-F 1300 Niro Instrukcja

9 Października 2024

Hayward S240SLETL Instrukcja

9 Października 2024

Anova BE1450ASC Instrukcja

8 Października 2024

Anova BA2C10 Instrukcja

8 Października 2024

Einhell RG-GP 1139 Instrukcja

8 Października 2024