Instrukcja obsługi Hotpoint MN 314 IX H

Hotpoint Magnetostrykcja MN 314 IX H

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hotpoint MN 314 IX H (4 stron) w kategorii Magnetostrykcja. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

PRODUCT DESCRIPTION

CONTROL PANEL

1 2 3 4 6 7

1. Control panel

2. Identification plate

(do not remove)

3. Door

4. Upper heating element/grill

5. Light

6. Turntable

8 95

1. STOP

For stopping a function or an audible

signal, cancelling the settings and

switching off the oven.

2. MICROWAVES FUNCTION /

POWER

For selecting the microwaves

function and setting the required

power level.

3. GRILL FUNCTION

4. CRISP FUNCTION

5. DISPLAY

6. + / - BUTTONS

For adjusting the settings of a

function (e.g. length, weight).

7. DYNAMIC DEFROST

8. START

For starting a function. When the

oven is switched off, it activates the

“Jet Start” microwave function.

9. DOOR OPENING BUTTON

Read the safety instructions carefully before using the product

DAILY REFERENCE

GUIDE

THANK YOU FOR PURCHASING A HOTPOINT

PRODUCT

To receive more comprehensive help and support,

please register your product at www.hotpoint-

ariston.com/register

You can download the Safety Instructions and

the Use and Care Guide by visiting our website

www.hotpoint.eu and following the

instructions on the back of this booklet.

WWW

HANDLE FOR THE CRISP PLATE

Useful for removing the hot

crisp plate from the oven.

WIRE SHELF

This allows you to place food

closer to the grill, for perfectly

browning your dish. Place the

wire shelf on the turntable,

making sure that it does not

come into contact with other surfaces.

COVER IF SUPPLIED

Useful for covering food while it

is cooking or heating in the

microwave.

The cover reduces splashes,

keeps foods moist and can also

be used to create two cooking

levels. It is not suitable with any of the grill

functions (including “Dynamic Crisp”).

FUNCTIONS

TURNTABLE

Placed on its support, the

glass turntable can be used

with all cooking methods.

The turntable must always be

used as a base plate for other

containers and accessories.

TURNTABLE SUPPORT

Only use the support for the glass

turntable. Do not rest other

accessories on the support.

CRISP PLATE

Only for use with the specific

“Dynamic Crisp” function.

The crisp plate must always

be placed in the centre of the

glass turntable and can be

preheated when empty, using the special function

for this purpose only. Place the food directly on the

crisp plate.

Other accessories that are not supplied can be purchased separately from the After-sales Service.

ACCESSORIES

There are a number of accessories available on the

market. Before you buy, ensure they are suitable for

microwave use and resistant to oven temperatures.

Metallic containers for food or drink should never be

used during microwave cooking.

Always ensure that foods and accessories do not

come into contact with the inside walls of the oven.

Always ensure that the turntable is able to turn freely

before starting the oven. Take care not to unseat the

turntable whilst inserting or removing other

accessories.

MICROWAVES

For quickly cooking and reheating food or

drinks.

POWER RECOMMENDED FOR

750 W

Quickly reheating drinks or other foods

with a high water content or meat and

vegetables.

500 W

Cooking fish, meaty sauces, or sauces

containing cheese or egg. Finishing

off meat pies or pasta bakes.

350 W Slow, gently cooking. Perfect for

melting butter or chocolate.

160 W Defrosting frozen food or softening

butter and cheese.

0 W When using the timer only

DYNAMIC CRISP

For perfectly browning a dish, both on the

top and bottom of the food. This function must only

be used with the special crisp plate.

DURATION

(min) RECOMMENDED FOR

3 - 4 Cookies (8- 10 pieces)

7 - 8 Frozen pizza (350 g)

7 - 9 Sponge cake (500 g)

8 - 10 Fish fingers (8 pieces)

9 - 10 Pizza (350 g)

10 - 14 French fries (200 g - 300g)

13 - 15 Quiche Lorraine (500 g)

Required accessories: Crisp plate, handle for the crisp plate

WWW Download the Use and Care Guide at

www.hotpoint.eu for more information

WWW Download the Use and Care Guide at

www.hotpoint.eu for more information

GRILL

For browning, grilling and gratins when used

alone. We recommend turning the food

during cooking. For best results, preheat the grill for

3-5 minutes. For quickly cooking and gratinating

dishes, combines with microwaves.

POWER DURATION

(min) RECOMMENDED FOR

500 W 14 - 18 Lasagne (400 - 500 g)

500 W 10 - 14 Fish (600 g)

500 W 40 - 50 Chicken (whole; 1-1.2 kg)

350 W 15 - 18 Fish gratin (600 g)

0 W - Browning only

Recommended accessories: wire shelf

DAILY USE

. SELECT A FUNCTION

Simply press the button for the function you require to

select it.

. SET THE LENGTH

After selecting the function you require,

use or to set the length for it to

run.

The time can be changed during cooking by pressing

or or by increasing the length for 30 seconds

each time by pressing

. SET THE POWER OF THE MICROWAVE

Press as many times as required to

select the power level for the microwave.

To use the microwave in combination with the grill,

select the "Grill" function by pressing and then use

to set the microwave power.

Please note: You can also change this setting during cooking by

pressing .

. DYNAMIC DEFROST

Press , then use to set the or

weight of the food.

During defrosting, the

function will pause briefly

to allow you to turn the food.

Once the operation is complete, close the door and

press .

. ACTIVATE THE FUNCTION

Once you have applied the settings you require, press

to activate the function.

You can press at any time to pause the function

that is currently active.

. SAFETY LOCK

This function is automatically activated

to prevent the oven from being switched

on accidentally. Open and close the door, then press

to start the function.

. PAUSE

To pause an active function, for example to stir or turn

the food, simply open the door. To start it up again,

close the door and press

. JET START

When the oven is switched off, press to activate

cooking with the microwave function set at full power

(750 W) for 30 seconds.

Every time the button is pressed again, the cooking

time will be increased by a further 30 seconds.

. SET THE TIME

With the oven switched off, press

until the two digits for the hour (on the

left) starting flashing.

Use or to set the correct hour and press to

confirm: The minutes will flash on the display.

Use or to set the minutes and press to

confirm.

Please note: You may need to set the time again following

lengthy power outages.

. TIMER

When the oven is switched off, the display can be used

as a timer. To activate the function and set the length of

time you require, use or . Press to set the

power to 0 W, then press to activate the countdown.

Please note: The timer does not activate any of the

cooking cycles.

To stop the timer at any time, press

DYNAMIC DEFROST

For quickly defrosting food such as meat,

poultry and fish weighing between 100 g and 2 kg.

Food should be placed directly onto the glass

turntable. Turn the food when prompted.

WWW Download the Use and Care Guide from www.hotpoint.eu for helpful cooking tables and the table of tested

recipes, compiled for the certification authorities in accordance with standards IEC 60705 and IEC 60350.

Specyfikacje produktu

Marka:	Hotpoint
Kategoria:	Magnetostrykcja
Model:	MN 314 IX H

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hotpoint MN 314 IX H, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Magnetostrykcja Hotpoint

Hotpoint HVMB14S4WWW Instrukcja

8 Października 2024

Hotpoint MP676IXH Instrukcja

5 Października 2024

Hotpoint MWH2021X Instrukcja

2 Października 2024

Hotpoint MN 214 IX HA Instrukcja

29 Września 2024

Hotpoint MD 554 IX H Instrukcja

28 Września 2024

Hotpoint MP 676 BL H Instrukcja

27 Września 2024

Hotpoint MWH 27343 B Instrukcja

21 Września 2024

Hotpoint CounterSaver Plus RVM1335BC Instrukcja

19 Września 2024

Hotpoint MWH 251 B Instrukcja

16 Września 2024

Hotpoint MWH 253 B Instrukcja

16 Września 2024

Instrukcje Magnetostrykcja

Najnowsze instrukcje dla Magnetostrykcja

Sharp R-334W Instrukcja

15 Października 2024

Whirlpool WMCS7022RS Instrukcja

15 Października 2024

Insignia NS-MW11BK5 Instrukcja

15 Października 2024

Insignia NS-MW7RM5 Instrukcja

15 Października 2024

Maytag UMCS5022RZ Instrukcja

15 Października 2024

Whirlpool AMW 730/WH Instrukcja

14 Października 2024

Whirlpool AVM 220/WP/AV Instrukcja

14 Października 2024

Daewoo KOR-6CDS8 Instrukcja

14 Października 2024

Pelgrim MAG740 Instrukcja

13 Października 2024

Sharp R-2V11B Instrukcja

13 Października 2024