Instrukcja obsługi Hotpoint HCW6O7HTS

Hotpoint Magnetostrykcja HCW6O7HTS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hotpoint HCW6O7HTS (14 stron) w kategorii Magnetostrykcja. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/14

Owner's Manual

THANK YOU FOR BUYING A HOTPOINT PRODUCT

In order to receive a more complete assistance, please

YOUR APPLIANCE IN ORDER TO

REACH MORE INFORMATION

Before using the appliance carefully read the Safety

Instruction.

PRODUCT DESCRIPTION

1. Control panel

2. Cavity Fan (not visible) and

Circular heating element (not

visible)

3. Ladder racks

(the level is indicated on the front

of the oven)

4. Door

5. Upper heating element/grill

6. Lamp

7. Meat probe insert point

(if present)

8. Identification plate

(do not remove)

9. Lower heating element

(not visible)

CONTROL PANEL DESCRIPTION

1 2 3 4 5 76 8 9

1. ON / OFF

For switching the oven on and

off and for stopping an active

function.

2. MENU / FUNCTIONS DIRECT

ACCESS

For quick access to the functions

and menu.

3. NAVIGATION BUTTON MINUS

For scrolling through a menu and

decreasing the settings or values

of a function.

4. BACK

For returning to the previous

screen.

During cooking, allows settings to

be changed.

5. DISPLAY

6. CONFIRM

For confirming a selected function

or a set value.

7. NAVIGATION BUTTON PLUS

For scrolling through a menu and

increasing the settings or values of

a function.

8. OPTIONS / FUNCTIONS DIRECT

ACCESS

For quick access to the functions,

settings and favorites.

9. START

For starting a function using the

specified or basic settings.

ACCESSORIES

Before purchasing other accessories that are available

on the market, make sure that they are heat-resistant

and suitable for steaming.

Make sure that there is a gap of at least 30 mm

between the top of any container and the walls of the

cooking compartment in order to allow steam to ow

suciently.

Accessories during microwave function may raise in

temperature. It is recommended to use protection to

handle accessories at the end of the cycle.

WIRE SHELF BAKING TRAY CRISP PLATE HANDLE FOR CRISP

PLATE

The wire shelf is suitable

for all cooking modes, also

in Microwave cooking.

When using microwaves

place the wire shelf always

on level 1 (the lower one).

You can place food directly

on the wire shelf or use it

to support baking trays

and tins or other oven-

ware resistant to heat and

microwaves.

The baking tray is suitable

for all cooking modes

except for “Microwave”

functions. Can be used

to cook all kind of foods

without container. Use it

to collects the cooking

juices, placing it below

the wire shelf.

Only for use with the

designated functions.

The Crisp plate must always

be placed in the center of

the wire shelf and can be

pre-heated when empty,

using the special function

for this purpose only. Place

the food directly on the

Crisp plate. Place the silicone

feet between the bars of the

wire shelf for added stability.

Useful for removing the

hot Crisp plate from the

oven.

STEAMER*

(ONLY IN SOME MODELS)

To steam foods such as fish or vegetables, place these in the basket (2) and pour

drinking water (100 ml) into the bottom of the steamer (3) to achieve the right

amount of steam. To boil foods such as potatoes, pasta, rice or cereals, place these

directly on the bottom of the steamer (the basket is not required) and add an

appropriate amount of drinking water for the amount you are cooking.

For best results, cover the steamer with the lid (1) provided.

Always place the steamer on the wire shelf at level 1 and only use it with the

appropriate cooking functions, or with microwave function.

The number of accessories may vary depending on which model is purchased.

*Other accessories can be purchased separately from the After-sales Service.

INSERTING THE WIRE SHELF AND OTHER

ACCESSORIES

Insert the wire shelf onto the level you require by

holding it tilted slightly upwards and resting the

raised rear side (pointing upwards) down first.

Then slide it horizontally along the runners as far as

possible.

Other accessories, like the baking tray, are to be

inserted horizontally, letting them slide on the

runners.

Push the accessories all the way in, making sure, that

it does not touch the appliance door.

FUNCTIONS

CONVENTIONAL

For perfectly cooking and browning both on the

top and bottom any kind of dish on one shelf only. To

achieve best results this function have the preheating

phase: wait the end of preheat to insert the food.

Required accessories: baking tray or wire shelf and heatproof

container.

FOOD TEMP. (°C) DURATION (min)

Cupcake / Smallcake 160 20 - 25

Cookies 165 15 - 20

FORCED AIR

For cooking sweets and meats with hot air

circulation. To achieve best results this function

have the preheating phase: wait the end of preheat

to insert the food. Is possible to use it for cooking

different foods that require the same cooking

temperature on several shelves at the same time. This

function can be used to cook different foods without

odours being transferred from one food to another.

Required accessories: baking tray or wire shelf and heatproof

container.

REMOVING AND REFITTING THE LADDER RACKS

There are two ladder racks on both sides of the oven

cavity, anchored on two button-shaped supports. The

ladder racks are removable to make cleaning more

convenient.

1. To remove the ladder racks, firmly grip the external

part of the guide, and pull it upwards to extract it

from the frontal support while rotating on the rear

support, then slide out the whole part from the

cavity.

2. To reposition the ladder racks, slide the back part

onto the rear support. Then, once anchored, push

the assy down until the ladder rack is inserted into

the frontal support.

FIRST TIME USE

1. SELECT THE LANGUAGE

You will need to set the language and the time

when you switch on the appliance for the first time:

“English” will show on the display.

English

Press or to scroll through the list of available

languages and select the one you require.

Press to confirm your selection.

Please note: The language can subsequently be changed

by selecting “LANGUAGE” in “SETTINGS” menu, available by

pressing .

2. SET THE TIME

After selecting the language, you will need to set the

current time: The two digits for the hour will flash on

the display.

CLOCK

Press or to set the current hour and press :

The two digits for the minutes will flash on the

display. Press or to set the minutes and press

to confirm.

Please note: You may need to set the time again following

lengthy power outages. Select “CLOCK” in “SETTINGS” menu,

available by pressing .

3. SET POWER CONSUMPTION

The oven is programmed to consume a level of

electrical power that is compatible with a domestic

network that has a rating of more than 3 kW (16 A): If

your household uses a lower power, you will need to

decrease this value (13 A). Select POWER in SETTINGS

menu avialable by pressing and select desired

power setting.

1.Low

2.High

4. HEAT THE OVEN

A new oven may release odours that have been left

behind during manufacturing: this is completely

normal. Before starting to cook food, we therefore

recommend heating the oven with it empty in order

to remove any possible odours.

Remove any protective cardboard or transparent film

from the oven and remove any accessories from inside

it. Heat the oven to 200 °C for around one hour, using

the “Fast Preheat” function. Odors and smoke are

normal when the oven is used the first few times, or

when it is heavily soiled. Follow the instructions for

setting the function correctly.

Please note: It is advisable to air the room after using the

appliance for the rst time.

Specyfikacje produktu

Marka:	Hotpoint
Kategoria:	Magnetostrykcja
Model:	HCW6O7HTS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hotpoint HCW6O7HTS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Magnetostrykcja Hotpoint

Hotpoint HCW6O7HTS Instrukcja

27 Lutego 2025

Hotpoint HCW607HT Instrukcja

27 Lutego 2025

Hotpoint HMD44MXUK Instrukcja

27 Lutego 2025

Hotpoint HMW47DHMBUK Instrukcja

27 Lutego 2025

Hotpoint HMW47HMXUK Instrukcja

27 Lutego 2025

Hotpoint HMD44MBUK Instrukcja

27 Lutego 2025

Hotpoint HVMB14S4WWW Instrukcja

8 Października 2024

Hotpoint MP676IXH Instrukcja

5 Października 2024

Hotpoint MWH2021X Instrukcja

2 Października 2024

Hotpoint MN 214 IX HA Instrukcja

29 Września 2024

Instrukcje Magnetostrykcja

Najnowsze instrukcje dla Magnetostrykcja

CATA MC 25 ALV BK Instrukcja

17 Marca 2025

Goodmans 300946 Instrukcja

15 Marca 2025

Goodmans 300943 Instrukcja

14 Marca 2025

Goodmans 305822 Instrukcja

11 Marca 2025

Melissa 16330105 Instrukcja

9 Marca 2025

StarQ MWM2320 Instrukcja

6 Marca 2025

Whirlpool WMN461BXF Instrukcja

5 Marca 2025

Whirlpool WMD6O4TBF Instrukcja

5 Marca 2025

LG MSER1130B Instrukcja

3 Marca 2025

Corbero CMICM20GLWINTEG Instrukcja

1 Marca 2025