Instrukcja obsługi Honeywell HEV685B
Honeywell
Nawilżacze
HEV685B
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell HEV685B (18 stron) w kategorii Nawilżacze. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/18
GETTING TO KNOW
YOUR COOL MOISTURE
EVAPORATIVE HUMIDIFIER
Invisible moisture
• Evaporative humidification
means you will NOT see
the moisture output.
• With evaporative humidification, a fan pulls
dry air from the room through the saturated
wicking filter. Moisture from the wicking filter
evaporates and is pushed into the room with
the help of the fan.
• Evaporative humidification adjusts moisture
output to the amount of moisture the air can
hold. The drier (less humid) the air in the room, the more moisture the humidifier will add to the
air. An evaporative humidifier cannot add more moisture to the room than the air can hold. The
amount of moisture the air can hold depends on many factors including relative humidity level,
temperature and size of room.
Instruction Manual
HONEYWELL TOP FILL
COOL MOISTURE HUMIDIFIER
MODEL HEV685 SERIES
REPLACEMENT FILTER: HONEYWELL HC-14 SERIES FILTER E
Humidity Level
• The ideal indoor humidity level is 40-60%
• Use a Honeywell humidity monitor
(HHM10 or H10C) to check your indoor
humidity level (not included)
Filter
• A wicking filter is required for this unit to operate
(one included)
• The wicking filter will help to capture minerals
from your water and will help to prevent white dust
(calcium deposits from hard water)
• If you have hard water, you will need to replace your
filter more frequently
• See “Caring for your Filter” section for tips on
prolonging the life of your wicking filter
For questions and information about this humidifier
Visit www.HoneywellPluggedIn.com or Call 1-800-477-0457
2 3
1. The humidifier should always be placed on a
firm, flat, waterproof surface at least four feet
(1.2 m) away from bedside, twelve inches
(30 cm) from the wall, and out of reach of
patients, children and pets.
2. Be sure the humidifier is in a stable position
and the power cord is away from heated
surfaces and out of the way to prevent the
humidifier from being tipped over.
3. Before using the humidifier extend the cord
and inspect for any signs of damage. DO NOT
use the unit if the cord has been damaged.
4. The humidifier has a polarized plug (one blade
is wider than the other) as a safety feature.
This plug will fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact
a qualified electrician. DO NOT attempt to
defeat this safety feature.
5. CAUTION: To avoid fire or shock hazard,
plug the humidifier directly into a 120V AC
electrical outlet. To avoid risk of fire, shock or
personal injury use an extension cordDO NOT
or power strip.
6. Shut off and unplug humidifier before moving.
The humidifier should always be unplugged and
emptied when not in operation or while being
cleaned. DO NOT move or tilt humidifier while it
is in operation. Plug and unplug humidifier with
dry hands. pull by cord.NEVER
7. When moving or lifting the full Water Tank,
use two hands; one hand on the Tank
Handle and the other on the bottom of
the Tank.
8. DO NOT add any medications, inhalants,
scented products or essential oils into Base,
Water Reservoir or Water Tank.
9. DO NOT cover or insert objects into any
openings on the humidifier.
10. DO NOT block intake or output vents.
11. DO NOT operate the humidifier without
water. Turn off and unplug unit when Tank
is empty.
12. Humidifier requires regular cleaning. Refer
to, and follow, cleaning instructions.
13. DO NOT operate outdoors; this appliance
is intended for indoor use.
14. DO NOT attempt to repair or adjust any
electrical or mechanical functions on this
humidifier. Doing so will void your warranty.
15. For residential use only.
SAVE THESE INSTRUCTIONS
SAFETY INSTRUCTIONS
READ AND SAVE THESE SAFETY INSTRUCTIONS
BEFORE USING THIS HUMIDIFIER
When using electrical appliances, basic precautions should always be followed to reduce
the risk of fire, electrical shock and injury to persons, including the following:
GETTING TO KNOW YOUR HUMIDIFIER
Water
Tank
Plunger
Housing
Water
Reservoir Base
Motor
Housing
Power/Output
Knob
Humidity
Level Knob
Wicking
Filter
Plunger
Tank Cover
Tank Handle
Intake
Grill
Humidity
Reached
Indicator
Refill
Indicator
Float Paddle
Auto Shut Off
Float
How It Works:
Water is released into the Reservoir when the Float Paddle engages the Plunger at the bottom
of the water tank. A Wicking Filter absorbs water from the Reservoir. A fan pulls dry air from
the room into the humidifier where it passes through the saturated Wicking Filter. The filter
captures minerals and other impurities from the water, before the moisture is evaporated back
into the dry room with the help of the fan. The amount of moisture output depends on many
factors, including the current room humidity and temperature. As the humidity level in the
room increases, the moisture output decreases, which prevents over humidification.
4 5
1. Remove Water Tanks and set aside. Remove Housing and lift up to expose Wicking Filter.
2. Carry Wicking Filter and Base to sink or tub.
3. Remove Filter from Base and run under cool water until saturated.
4. Carefully place wet Filter back in base; squeeze out excess water.DO NOT
1. Remove Water Tanks. Under each tank, identify the Brackets where the Float Paddle will be installed.
2. Place the Float Rod over both Brackets and press firmly until you hear it click into both Brackets.
3. Pull up gently on Float Rod to be sure it doesn’t pop out of either of the Brackets. Replace the Water Tank.
Repeat with second Tank and Float Paddle.
Step 3 Step 2
$
Step 4
$
Step 1
Step 2
FILLING/REFILLING WATER TANKS
1. Flip Tank Cover open.
2. Pour water into the Tank opening.
3. Close Tank Cover to keep objects and debris out of water.
Repeat to fill second Water Tank.
Step 1 Step 3
The Tanks can be filled in two ways.
To fill at the humidifier:
Float Paddle Installation – required for humidifier to operate
This humidifier uses a float system to regulate the water flow from the Tank to the Reservoir. The Float
Paddles must be properly installed for the unit to operate. If not properly installed, water may not flow into
the Reservoir or it may leak from the Base. The Float Paddle is designed to be easy to install and remove.
CAUTION: Improper placement of the Float Paddles could result in leaking or water not feeding
to the Reservoir.
Step 3 Step 2
Top Le Haut
“Click”
Step 1
Float
Rod
Float
Paddle
Brackets
Preparing the Wicking Filter
To speed the delivery of moisture into your room it is recommended to wet the wicking filter before use.
Step 2
$
Step 1
$
Step 4
Step 3
To fill at the sink or tub:
1. Flip Tank Cover open. Grasp Tank Handle and lift Water Tank to remove from Base. Carry Tank to sink
or tub. use the Tank Cover to carry Water Tank. NOTE: DO NOT
2. Fill Tank with water. When filling, allow enough space at the top to minimize splashing when carrying.
Use cool tap water; use warm or hot water. DO NOT
3. Carry Water Tank back to humidifier using two hands; one hand on Tank Handle at the top of the Tank
and other hand supporting the bottom of the Tank. Take care not to push the Plunger on the bottom of
the Water Tank or leaking may occur.
4. Place the Water Tank on the humidifier Base. You may hear the water draining into the Reservoir.
Repeat to fill the second Water Tank.
NOTE: If the wicking filter has dried out, it may take up to a minute for the humidifier to turn back on while
the wick absorbs the water.
CAUTION: Use care when handling Water Tanks to avoid unnecessary impact. Banging
or dropping the Water Tanks could result in damage to the Tank that may
cause leaking.
1. Open box and locate locate the two (2)
Float Paddles and set aside. These must be
installed for the humidifier to operate properly.
2. Place the humidifier on a firm, level, water resistant
surface at least 12” (30 cm) from any walls.
DO NOT DO NOT block Intake Grill on base of unit.
place on surfaces that can be damaged by water.
Unpack the Humidifier (Keep this instruction manual for reference.)
SETTING UP YOUR HUMIDIFIER
Step 1 Step 2
Float
Rod
Specyfikacje produktu
| Marka: | Honeywell |
| Kategoria: | Nawilżacze |
| Model: | HEV685B |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Honeywell HEV685B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Nawilżacze Honeywell
6 Sierpnia 2024
5 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
Instrukcje Nawilżacze
- Nawilżacze Beurer
- Nawilżacze Philips
- Nawilżacze Livoo
- Nawilżacze Orbegozo
- Nawilżacze Homedics
- Nawilżacze Medisana
- Nawilżacze Trotec
- Nawilżacze Klarstein
- Nawilżacze Steba
- Nawilżacze Scarlett
- Nawilżacze Vornado
- Nawilżacze Solac
- Nawilżacze Winix
- Nawilżacze Lanaform
- Nawilżacze Holmes
- Nawilżacze Saturn
- Nawilżacze VAX
- Nawilżacze Sinbo
- Nawilżacze Vicks
- Nawilżacze Ufox
- Nawilżacze Boneco
- Nawilżacze Venta
Najnowsze instrukcje dla Nawilżacze
14 Października 2024
13 Października 2024
13 Października 2024
12 Października 2024
12 Października 2024
10 Października 2024
7 Października 2024
9 Sierpnia 2024
9 Sierpnia 2024
9 Sierpnia 2024