Instrukcja obsługi Hitachi CS33EB 30S


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hitachi CS33EB 30S (21 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/21
Chain Saw
Model CS 33EB
Handling instructions
Note:
Before using this machine, carefully read through these HANDLING INSTRUCTIONS
to ensure e cient, safe operation. It is recommended that these INSTRUCTIONS be
kept readily available as an important reference when using this machine.
1
MEANINGS OF SYMBOLS
NOTE: Some units do not carry them.
Symbols
WARNING
The following show used symbols for the machine. Be sure that you understand their meaning before
use.
It is important that you read, fully understand and observe the following safety precautions and warnings.
Careless or improper use of the unit may cause serious or fatal injury.
Read, understand and follow all warnings and instructions in this manual and on the unit.
Always wear eye, head and ear protectors when using this unit.
Warning, kickback danger. Be careful of possible sudden and accidental upward and/or backward motion
of the guide bar.
One-handed usage not permitted. While cutting, hold saw rmly with both hands with thumb rmly locked
around front handle.
Contents
WHAT WHAT? IS .............................................................................. 2
WARNINGS AND SAFETY INSTRUCTIONS .................................. 3
SPECIFICATIONS ............................................................................ 5
ASSEMBLY PROCEDURES ............................................................. 6
OPERATING PROCEDURES ........................................................... 6
MAINTENANCE .............................................................................. 11
Parts breakdown
2
WHAT IS WHAT?
1. Throttle trigger: Device activated by the operatorʼs nger, for
controlling the engine speed.
2. Throttle trigger lockout (Safety trigger): Device that prevents
the the accidental operation of throttle trigger until manually
released.
3. Ignition switch: Device for allowing the engine to be st arted or
stopped.
4. Oil tank cap: For closing the oil tank.
5. Recoil starter: Pull handle to start the engine.
6. Front handle: handle Support located at or towards the front of
the engine housing.
7. Fuel tank cap: For closing the fuel tank.
8. Choke control knob: Device for enriching the fuel/air mixture in
the carburetor, to aid starting.
9. Guide bar: The part that suppor ts and guides the saw chain.
10. Saw chain: Chain, serving as a cutting tool.
11. Chain brake (Front hand guard): Device for stopping or locking
the chain.
12. Spiked bumper (optional): Device for acting as a pivot when in
contact with a tree or log.
13. Chain catcher: device for restraining the saw chain.
14. Guide bar cover: Device for covering the guide bar and saw
chain when the unit is not being used.
15. Combi box spanner: The tool for removing or installing a spark
plug and tensioning the saw chain.
16. Handling instructions: Included with unit. Read before operation
and keep for future reference to learn proper, safe techniques.
14 15
16
12
11
10
9
13
8
2
6
5
1
3
7
4


Specyfikacje produktu

Marka: Hitachi
Kategoria: Maszyna do piłowania
Model: CS33EB 30S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hitachi CS33EB 30S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Maszyna do piłowania Hitachi

Hitachi

Hitachi C 7MFA(LA) Instrukcja

10 Października 2024
Hitachi

Hitachi CM4SB2 Instrukcja

4 Października 2024
Hitachi

Hitachi C10RJ Instrukcja

26 Września 2024
Hitachi

Hitachi CJ160V Instrukcja

26 Września 2024
Hitachi

Hitachi 752138 Instrukcja

26 Września 2024
Hitachi

Hitachi C7SB2 Instrukcja

25 Września 2024
Hitachi

Hitachi C10FSBP4 Instrukcja

25 Września 2024
Hitachi

Hitachi C10FCH2 Instrukcja

25 Września 2024
Hitachi

Hitachi UU240F Instrukcja

25 Września 2024
Hitachi

Hitachi C10FCG Instrukcja

25 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Güde

Güde GSS 400 Instrukcja

12 Stycznia 2025
Makita

Makita DUC306PG2 Instrukcja

12 Stycznia 2025
HiKOKI

HiKOKI C 6BU3 Instrukcja

11 Stycznia 2025
DEDRA

DEDRA DED7060 Instrukcja

11 Stycznia 2025
Einhell

Einhell KGS 190 Instrukcja

11 Stycznia 2025
Sun Joe

Sun Joe SWJ599E Instrukcja

11 Stycznia 2025
Maruyama

Maruyama MCV51 Instrukcja

11 Stycznia 2025
Vonroc

Vonroc JS505DC Instrukcja

9 Stycznia 2025