Instrukcja obsługi Hitachi C10FCG

Hitachi Maszyna do piłowania C10FCG

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hitachi C10FCG (49 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/49

DOUBLE INSULATION

DOUBLE ISOLATION

AISLAMIENTO DOBLE

Model

Modèle

Modelo

C 10FCG

Compound Miter Saw

Scie à onglets combinée

Sierra ingletadora

SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL

WARNING

IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!

This manual contains important information about product safety. Please read and understand this

manual BEFORE operating the power tool. Please keep this manual available for other users and owners

before they use the power tool. This manual should be stored in safe place.

INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI

AVERTISSEMENT

Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la mort ou de

sérieuses blessures corporelles !

Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit. Prière

de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce mode d’emploi

à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent l’outil motorisé. Ce mode

d’emploi doit être conservé dans un endroit sûr.

INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES

ADVERTENCIA

¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar en lesiones

de gravedad o la muerte!

Este manual contiene información importante sobre la seguridad del producto. Lea y comprenda este

manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para que puedan leerlo otras

personas antes de utilizar la herramienta eléctrica. Este manual debe ser guardado en un lugar seguro.

English PAGE PAGE

Français PAGE PAGE

Español PÁGINA PÁGINA

CONTENTS

TABLE DES MATIERES

ÍNDICE

SPÉCIFICATIONS ......................................................21

ACCESSOIRES .......................................................... 21

APPLICATIONS ..........................................................22

PRÉPARATION AVANT L’UTILISATION .....................22

AVANT L’UTILISATION ...............................................23

AVANT LA COUPE ..................................................... 23

APPLICATIONS PRATIQUES .....................................24

INSTALLATION ET RETRAIT DE LA LAME ...............28

ENTRETIEN ET INSPECTION ...................................28

SERVICE APRÈS-VENTE ET RÉPARATIONS ...........29

GUIDE DE DÉPANNAGE ............................................30

LISTE DES PIECES ....................................................46

INFORMATIONS IMPORTANTES DE SÉCURITÉ ..... 17

SIGNIFICATION DES MOTS D’AVERTISSEMENT .... 17

SECURITE ..................................................................... 17

CONSIGNES DE SECURITE RELATIVES AUX

OUTILS ÉLECTRIQUES ...................................... 17

PIECES DE RECHANGE ............................................ 18

UTILISER LE CORDON DE

RALLONGE APPROPRIÉ .................................... 19

DOUBLE ISOLATION POUR UN

FONCTIONNEMENT PLUS SUR......................... 19

UTILISATION ET ENTRETIEN ......................................20

NOM DES PIÈCES .....................................................20

APPLICATIONS ............................................................7

PREPARATION BEFORE OPERATION .......................7

BEFORE USING ...........................................................8

BEFORE CUTTING ......................................................9

PRACTICAL APPLICATIONS .....................................10

SAW BLADE MOUNTING AND

DISMOUNTING ................................................... 13

MAINTENANCE AND INSPECTION ..........................14

SERVICE AND REPAIRS............................................15

TROUBLESHOOTING GUIDE ................................... 16

PARTS LIST ................................................................46

IMPORTANT SAFETY INFORMATION ........................3

MEANINGS OF SIGNAL WORDS ................................3

SAFETY ............................................................................3

IMPORTANT SAFETY INSTRUCTIONS FOR

USING ALL POWER TOOLS .................................3

REPLACEMENT PARTS ..............................................4

USE PROPER EXTENSION CORD .............................4

DOUBLE INSULATION FOR SAFER OPERATION ......5

OPERATION AND MAINTENANCE ................................5

NAME OF PARTS .........................................................5

SPECIFICATIONS ........................................................6

ACCESSORIES ............................................................7

ESPECIFICACIONES .................................................35

ACCESORIOS ............................................................ 35

APLICACIONES..........................................................36

PREPARATIVOS PREVIOS A LA OPERACIÓN .........36

ANTES DE LA UTILIZACIÓN .....................................37

ANTES DEL CORTE ...................................................37

APLICACIONES PRÁCTICAS ....................................38

MONTAJE Y DESMONTAJE DE LA

HOJA DE SIERRA ...............................................42

MANTENIMIENTO E INSPECCIÓN ...........................43

SERVICIO Y REPARACIONES ...................................44

GUIA DE IDENTIFICACION DE PROBLEMAS ...........45

LISTA DE PIEZAS .......................................................46

INFORMACIÓN IMPORTANTE SOBRE

SEGURIDAD ........................................................ 31

SIGNIFICADO DE LAS PALABRAS DE

SEÑALIZACIÓN ...................................................31

SEGURIDAD .................................................................. 31

NORMAS DE SEGURIDAD PARA LAS

HERRAMIENTAS ELÉCTRICAS ..........................31

PIEZAS DE REEMPLAZO .......................................... 32

UTILICE EL CABLE PROLONGADOR

ADECUADO .........................................................33

AISLAMIENTO DOBLE PARA OFRECER UNA

OPERACIÓN MÁS SEGURA ...............................33

OPERACIÓN Y MANTENIMIENTO ...............................34

NOMENCLATURA DE PARTES .................................34

English

IMPORTANT SAFETY INFORMATION

Read and understand all of the safety precautions, warnings and operating instructions in the Instruction Manual before operating or maintaining this power

tool.

Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety rules or precautions. An accident can

often be avoided by recognizing a potentially hazardous situation before it occurs, and by observing appropriate safety procedures.

Basic safety precautions are outlined in the “SAFETY” section of this Instruction Manual and in the sections which contain the operation and maintenance

instructions.

Hazards that must be avoided to prevent bodily injury or machine damage are identiﬁ ed by WARNINGS on the power tool and in this Instruction Manual.

Never use this power tool in a manner that has not been speciﬁ cally recommended by HITACHI.

MEANINGS OF SIGNAL WORDS

WARNING indicates a potentially hazardous situations which, if ignored, could result in death or serious injury.

CAUTION indicates a potentially hazardous situations which, if not avoided, may result in minor or moderate injury, or may cause machine damage.

NOTE emphasizes essential information.

SAFETY

IMPORTANT SAFETY INSTRUCTIONS FOR USING ALL POWER TOOLS

READ ALL OF THE WARNINGS AND OPERATING INSTRUCTIONS IN THIS MANUAL BEFORE OPERATING OR

MAINTAINING THIS TOOL:

WARNING:

When using this electric tool, take all necessary precautions to minimize the risk of electric shock or other personal injury.

In particular, always comply with the following safety rules:

1. ALWAYS KEEP GUARDS IN PLACE and in working order.

2. ALWAYS REMOVE ADJUSTING KEYS AND WRENCHES BEFORE

STARTING TOOL. Always conﬁ rm that all keys and adjusting wrenches

have been removed from the tool before it is turned on.

3. ALWAYS KEEP WORK AREA CLEAN. Avoid injuries by not cluttering

the work areas and work benches.

4. NEVER USE TOOL IN HAZARDOUS ENVIRONMENTS. Never use the

power tool in damp or wet places and never expose it to rain. Always keep

the work area well lighted.

5. NEVER PERMIT CHILDREN OR OTHERS TO LOITER NEAR THE

WORK AREA. Keep all people (especially children) away from the work

area. Always unplug unattended tools and keep the work place tamper-

proof by installing locks on the doors and on the master switches.

6. NEVER FORCE THE TOOL. It will do the job better and more safely if it

is operated at the rate for which it was designed.

7. ALWAYS USE THE RIGHT TOOLS. Never force a tool or an attachment

to do a job for which it was not designed.

8. ALWAYS WEAR PROPER APPAREL WHEN WORKING WITH THE

TOOL. Never wear loose clothing, gloves, neckties, rings, bracelets or

other jewelry which may get caught in the moving parts. Always wear

non-slip footwear, preferably with steel toes. Wear protective hair covering

to contain long hair.

9. ALWAYS WEAR EYE PROTECTION WITH SIDE SHIELDS THAT

MEETS THE REQUIREMENTS OF ANSI STANDARD Z87.1 WHEN

WORKING WITH THE TOOL TO PREVENT EYE INJURY. Ordinary

eyeglasses do not provide adequate protection because they do not

contain impact resistant safety glass. Also, use a face mask for additional

safety and wear a dust mask if the cutting operation produces dust.

10. ALWAYS SECURE THE WORKPIECE TO THE FENCE OR THE TABLE.

Use clamps or a vise to hold the workpiece in place. It is safer than using

your hand and it frees both hands to operate the tool.

11. NEVER OVERREACH. Always keep proper footing and balance when

working with the tool.

12. ALWAYS MAINTAIN TOOLS WITH CARE. Always keep tools sharp and

clean for the best and safest performance. Always follow instructions for

lubricating the tool and for changing accessories.

13. ALWAYS DISCONNECT THE TOOL before servicing and before

changing blades or other accessories.

14. NEVER RISK UNINTENTIONAL STARTING WHEN PLUGGING IN

THE TOOL. Always conﬁ rm that the switch is in the OFF position before

inserting the power plug into the receptacle.

15. ALWAYS USE RECOMMENDED ACCESSORIES ONLY WHEN

OPERATING THIS TOOL. Consult this instruction manual for descriptions

of recommended accessories. To avoid personal injuries, use only

recommended accessories in conjunction with this tool.

16. NEVER STAND ON THE TOOL. Prevent serious injury by not tipping the

tool and by not risking unintentional contact with the saw blade.

17. ALWAYS CHECK FOR DAMAGED PARTS BEFORE USING THE TOOL.

Always check the guard and all other components for damage before

using the tool to assure that they will function properly. Check all moving

parts for proper alignment, freedom from binding and other conditions

that might aﬀ ect proper operation. Always repair or replace any damaged

guards or other damaged components before using the tool.

18. ALWAYS CONFIRM THE ROTATION DIRECTION OF THE BLADE

BEFORE USING THE TOOL. Always feed work into the tool against the

rotation direction of the blade in order to prevent possible injury.

19. NEVER LEAVE THE TOOL RUNNING WHILE UNATTENDED. TURN

POWER OFF. Do not leave tool until it comes to a complete stop. Always

turn the power oﬀ when the tool is not in use. Always unplug the power

cord when the tool is not in use.

20. This tool was not designed to be used for mass-production applications

and should not be used in mass-production environments.

21. When servicing this tool, use only authorized replacement parts.

22. Apply 120 volts AC only to this tool. Applying the wrong voltage or applying

DC power can cause the POWER TOOL to operate improperly and cause

serious personal injury or damage to the tool.

23. Never raise the saw blade from the workpiece until it has ﬁ rst come to a

complete stop.

24. Always use outboard stands to provide support for long workpieces that

overhang the table of the slide compound miter saw.

25. Always return the carriage to the full rear position after each crosscut

operation in order to reduce the risk of injury.

26. POLARIZED PLUGS To reduce the risk of electric shock, this equipment

has a polarized plug (one blade is wider than the other). This plug will ﬁ t

in a polarized outlet only one way. If the plug does not ﬁ t fully in the outlet,

reverse the plug. If it still does not ﬁ t, contact a qualiﬁ ed electrician to

install the proper outlet. Do not change the plug in any way.

Speciﬁ c Safety Rules for Use of this Power Tool

WARNING:

The following speciﬁ c operating instructions must be observed

when using this POWER TOOL in order to avoid injury:

DO’s

ALWAYS OBSERVE THE FOLLOWING RULES TO

ASSURE SAFE USE OF THIS TOOL:

1. Review this Manual and familiarize yourself with the safety rules and

operating instructions for this POWER TOOL before attempting to use it.

2. Remove all packing materials attached or connected to the tool before

attempting to operate it.

3. Always conﬁ rm that the POWER TOOL is clean before using it.

4. Always wear snug-ﬁ tting clothing, non-skid footwear (preferably with steel

toes) and eye protection when operating the POWER TOOL.

Specyfikacje produktu

Marka:	Hitachi
Kategoria:	Maszyna do piłowania
Model:	C10FCG

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hitachi C10FCG, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna do piłowania Hitachi

Hitachi C 7MFA(LA) Instrukcja

10 Października 2024

Hitachi CM4SB2 Instrukcja

4 Października 2024

Hitachi C10RJ Instrukcja

26 Września 2024

Hitachi CJ160V Instrukcja

26 Września 2024

Hitachi 752138 Instrukcja

26 Września 2024

Hitachi C7SB2 Instrukcja

25 Września 2024

Hitachi C10FSBP4 Instrukcja

25 Września 2024

Hitachi C10FCH2 Instrukcja

25 Września 2024

Hitachi UU240F Instrukcja

25 Września 2024

Hitachi C10FCG Instrukcja

25 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Makita 5603 Instrukcja

15 Października 2024

MSW -TAS287 Instrukcja

15 Października 2024

MSW T-SAW300 Instrukcja

15 Października 2024

Black & Decker KS650 Instrukcja

14 Października 2024

Black & Decker GKC3630L20 Instrukcja

14 Października 2024

Ferm FKS-165 Instrukcja

14 Października 2024

Royal Catering RCBS-1650 Instrukcja

14 Października 2024

Royal Catering RCBS-1650.1ECO Instrukcja

14 Października 2024

Husqvarna 365H Instrukcja

13 Października 2024

Makita DJV181Z Instrukcja

12 Października 2024