Instrukcja obsługi Hitachi C 5YC

Hitachi Maszyna do piłowania C 5YC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hitachi C 5YC (12 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
Dustless Circular Saw
Model C 5YC
Handling Instructions
Note:
Before using this Electric Power Tool, carefully read through these
HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is
recommended that these INSTRUCTIONS be kept readily available
as an important reference when using this power tool.
2
GENERAL OPERATIONAL PRECAUTIONS
WARNING! When using electric tools, basic safety
precautions should always be followed to reduce the
risk of fire, electric shock and personal injury, including
the following.
Read all these instructions before operating this product
and save these instructions.
For safe operations:
1. Keep work area clean. Cluttered areas and benches
invite injuries.
2. Consider work area environment. Do not expose
power tools to rain. Do not use power tools in
damp or wet locations. Keep work area well lit.
Do not use power tools where there is risk to cause
fire or explosion.
3. Guard against electric shock. Avoid body contact
with earthed or grounded surfaces. (e.g. pipes,
radiators, ranges, refrigerators).
4. Keep children and infirm persons away. Do not let
visitors touch the tool or extension cord. All visitors
should be kept away from work area.
5. Store idle tools. When not in use, tools should be
stored in a dry, high or locked up place, out of reach
of children and infirm persons.
6. Do not force the tool. It will do the job better and
safer at the rate for which it was intended.
7. Use the right tool. Do not force small tools or
attachments to do the job of a heavy duty tool. Do
not use tools for purposes not intended; for example,
do not use circular saw to cut tree limbs or logs.
8. Dress properly. Do not wear loose clothing or
jewelry, they can be caught in moving parts. Rubber
gloves and non-skid footwear are recommended
when working outdoors. Wear protecting hair
covering to contain long hair.
9. Use eye protection. Also use face or dust mask if
the cutting operation is dusty.
10. Connect dust extraction equipment.
If devices are provided for the connection of dust
extraction and collection facilities ensure these are
connected and properly used.
11. Do not abuse the cord. Never carry the tool by the
cord or yank it to disconnect it from the receptacle.
Keep the cord away from heat, oil and sharp edges.
12. Secure work. Use clamps or a vise to hold the work.
It is safer than using your hand and it frees both
hands to operate tool.
13. Do not overreach. Keep proper footing and balance
at all times.
14. Maintain tools with care. Keep cutting tools sharp
and clean for better and safer performance. Follow
instructions for lubrication and changing
accessories. Inspect tool cords periodically and if
damaged, have it repaired by authorized service
center. Inspect extension cords periodically and
replace, if damaged. Keep handles dry, clean, and
free from oil and grease.
15. Disconnect tools. When not in use, before servicing,
and when changing accessories such as blades,
bits and cutters.
16. Remove adjusting keys and wrenches. Form the
habit of checking to see that keys and adjusting
wrenches are removed from the tool before turning
it on.
17. Avoid unintentional starting. Do not carry a plugged-
in tool with a finger on the switch. Ensure switch is
off when plugging in.
18. Use outdoor extension leads. When tool is used
outdoors, use only extension cords intended for
outdoor use.
19. Stay alert. Watch what you are doing. Use common
sense. Do not operate tool when you are tired.
20. Check damaged parts. Before further use of the
tool, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function. Check
for alignment of moving parts, free running of
moving parts, breakage of parts, mounting and any
other conditions that may affect its operation. A
guard or other part that is damaged should be
properly repaired or replaced by an authorized
service center unless otherwise indicated in this
handling instructions. Have defective switches
replaced by an authorized service center. Do not
use the tool if the switch does not turn it on and off.
21. Warning
The use of any accessory or attachment, other than
those recommended in this handling instructions,
may present a risk of personal injury.
22. Have your tool repaired by a qualified person.
This electric tool is in accordance with the relevant
safety requirements. Repairs should only be carried
out by qualified persons using original spare parts.
Otherwise this may result in considerable danger
to the user.
PRECAUTIONS ON USING CIRCULAR SAW
1. Do not use saw blades which are deformed or
cracked.
2. Do not use saw blades made of high speed steel.
3. Do not use saw blades which do not comply with
the characteristics specified in these instructions.
4. Do not stop the saw blades by lateral pressure on
the side surface of disc.
5. Always keep the saw blade sharp.
6. Ensure that the lower guard moves smoothly and
freely.
7. Never use the circular saw with its lower guard
fixed in the open position.
8. Ensure that the retraction mechanism of the guard
system operates accurately.
9. Never operate the circular saw with grasping the
saw blade upside down or to the lateral direction.
10. Ensure that the material is free of foreign matters
such as nails.
11. For model C5YC, the saw blade’s diameters which
can be mounted are 125 mm or less.
12. Be careful of brake kickbac.
This circular saw incorporates an electric brake that
functions when the switch is released. As there is
some kickback when the brake functions, be sure to
hold the main body securely.
3
NAME OF PARTS
SPECIFICATIONS
Voltage (by areas)* (230 V, 240 V)
Cutting Depth 35 mm Max.
Power Input* 1010 W
Capacity 125 mm Max. Hole diam. 20 mm
Full Load Amp.* 4.7 A, 4.6 A
Dimensions (Length × Height × Width) 284 mm × 208 mm × 320 mm
No Load Speed 9600/min
Weight (without cord) 2.9 Kg
STANDARD ACCESSORIES
(1) Box wrench ............................................................... 1
(2) Guide .......................................................................... 1
(3) Dust bag .................................................................... 1
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES (sold separately)
䡬Carbide Tipped Saw Blade (Dia. 125 mm) for the
gypsum board.
Optional accessories are subject to change without
notice.
Handle
Switch
Saw cover
Lever
Lower guard
Saw blade
Slide cover
Guide
Bevel piece
Inclined gauge
Wing bolt
Lock lever
Motor
Housing
Name plate
Gear cover
Brush holder
Brush cap
Clamp lever
Link
Wing bolt
Base
* Be sure to check the nameplate on product as it is subject to change by areas.

Specyfikacje produktu

Marka: Hitachi
Kategoria: Maszyna do piłowania
Model: C 5YC

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hitachi C 5YC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do piłowania Hitachi

Hitachi

Hitachi C 7MFA(LA) Instrukcja

10 Października 2024
Hitachi

Hitachi CM4SB2 Instrukcja

4 Października 2024
Hitachi

Hitachi C10RJ Instrukcja

26 Września 2024
Hitachi

Hitachi CJ160V Instrukcja

26 Września 2024
Hitachi

Hitachi 752138 Instrukcja

26 Września 2024
Hitachi

Hitachi C7SB2 Instrukcja

25 Września 2024
Hitachi

Hitachi C10FSBP4 Instrukcja

25 Września 2024
Hitachi

Hitachi C10FCH2 Instrukcja

25 Września 2024
Hitachi

Hitachi UU240F Instrukcja

25 Września 2024
Hitachi

Hitachi C10FCG Instrukcja

25 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Makita

Makita 5603 Instrukcja

15 Października 2024
MSW

MSW -TAS287 Instrukcja

15 Października 2024
MSW

MSW T-SAW300 Instrukcja

15 Października 2024
Black & Decker

Black & Decker KS650 Instrukcja

14 Października 2024
Black & Decker

Black & Decker GKC3630L20 Instrukcja

14 Października 2024
Ferm

Ferm FKS-165 Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCBS-1650 Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCBS-1650.1ECO Instrukcja

14 Października 2024
Husqvarna

Husqvarna 365H Instrukcja

13 Października 2024
Makita

Makita DJV181Z Instrukcja

12 Października 2024