Instrukcja obsługi Hikvision NS-0109P-60

Hikvision przełącznik NS-0109P-60

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hikvision NS-0109P-60 (2 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
2
3
Applicable Models
This manual is applicable to NS-0105P and NS-0109P series 100M long-range PoE switch.
Symbol Convenons
The symbols that may be found in this document are defined as follows.
·
·During the installaon and ulizaon of the device, please strictly conform to electrical
safety rules in different naons and regions.
·Ensure to use the aached power adaptor only and not to change the adaptor randomly.
Please refer to specificaon table for specific requirements of power adaptor.
·If the product does not work properly, please contact your dealer or the nearest service
center. Never aempt to disassemble the camera yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or maintenance.)
·The device must be installed in machine room only, and only maintenance staff or
qualified person should access to the device.
·Do not touch the upper cover area of the device that may be overheated.
·Power must be shut down during cable connecon, device installaon and
dismantlement.
·You shall acknowledge that the use of the device with Internet access might be under
network security risks, please strengthen protecon for your personal informaon and
data security. If you find the device might be under network security risks, please contact
with us.
·Proper configuraon of all passports and other security sengs is the responsibility of
the installer, and you shall keep user name and passports properly.
·Please keep all original packing materials properly. If the product does not work
properly, pack the switch in its original packing materials for shipping. We shall not assume
any responsibility for damages caused by improper packing materials during shipping.
·Ensure that your devices powered via the PoE port have their shells protected and
fire-proofed, because the switches are not compliant with the Limited Power Source (LPS)
standard.
·This is a class A product and may cause radio interference in which case the user may be
required to take adequate measures.
45
Device Connecon
Connect your devices according to your actual networking requirements.
Interfaces
Rear Panel
Grounding Terminal
Power Interface
DIP Switch
On: Extend model is on, connecng PoE port 1-4 (4 ports), 1-8 (8 ports).
Off: Extend model is off.
Grounding Terminal
The grounding terminal connects with ground cable in case of lightning.
Power Port
Connect power port of the switch with power socket with power cord
to provide power to the switch.
Front Panel
Packing List
1
Switch x 1 Quick Start Guide x 1
Power Adapter x 1
DC 48V
DIP Switch
PoE Ports
100M PoE ports connect to other PoE devices with network cable.
UPLINK
100M network port connects to other switches with network cable.
PWR Indicator
Solid means powered up normally. Unlit means no power supply
connected or power supply is abnormal.
PoE-MAX Indicator
Solid/flashing means the output power of the switch will reach the
upper limit, and the power supply may be abnormal if more devices
are connected. Unlit means power supplying is normal.
NS-0105P Series：
NS-0109P Series：
1 2 3 54
LINK/ACT Indicator
PoE Indicator
PoE-MAX Indicator
PWR
Indicator PoE Ports UPLINK
1 2 3 5 6 7 94 8
PoE-MAX Indicator
PWR
Indicator
LINK/ACT Indicator PoE Indicator
PoE Ports UPLINK
Up to 250 m
Camera
100M PoE Switch
Convergence Switch NVR Monitor
Indicates a hazard with a high level of risk, which if
not avoided, will result in death or serious injury.
Symbol Descripon
Provides addional informaon to emphasize or
supplement important points of the main text.
Indicates a potenally hazardous situaon, which if not
avoided, could result in equipment damage, data loss,
performance degradaon, or unexpected results.
4/8-Port 100M Long-Range PoE Switch
Quick Start Guide
Power-On Checking Regulatory Informaon
FCC Informaon
Please take aenon that changes or modificaon not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protecon against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instrucon
manual, may cause harmful interference to radio communicaons. Operaon of this
equipment in a residenal area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two
condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operaon.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed
under the EMC Direcve 2014/30/EU, the LVD Direcve 2014/35/EU,
the RoHS Direcve 2011/65/EU.
2012/19/EU (WEEE direcve): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collecon points.
For more informaon see: www.recyclethis.info
2006/66/EC (baery direcve): This product contains a baery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentaon for specific baery informaon. The baery is marked with this
symbol, which may include leering to indicate cadmium (Cd), lead (Pb),
or mercury (Hg). For proper recycling, return the baery to your supplier or to a designated
collecon point. For more informaon see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
See the following table and check whether your devices are correctly
connected. Aer proper connecon, you can use your switch without
doing any sengs.
Indicator Status Descripon
PWR
Solid
Unlit
Solid
Unlit
Flashing
The switch is powered on normally.
No power supply connected or power
supply is abnormal.
Link/Act
The port is connected.
The port is transming data.
The port is disconnected or connecon
is abnormal.
Please use the aached power cord in package to power up the switch.
The switch supports auto MDI/MDIX of ports, you can use
straight-through cable or crossover cable to connect the switch
and opposite Ethernet devices.
UD15463B
678
PoE Solid
Unlit
The switch provides power supply to PD
normally.
The switch is disconnected to PD, or
provides power supply to PD abnormally.
PoE-MAX
Solid
/Flashing
Unlit
The output power of the switch will reach
the upper limit. The power supply may be
abnormal if more devices are connected.
The switch provides power supply to PD
normally.
Quick Start Guide
COPYRIGHT ©2019 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all informaon, including, among others, wordings, pictures, graphs are the
properes of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinaer
referred to be “Hikvision”). This user manual (hereinaer referred to be “the Manual”)
cannot be reproduced, changed, translated, or distributed, parally or wholly, by any
means, without the prior wrien permission of Hikvision. Unless otherwise spulated,
Hikvision does not make any warranes, guarantees or representaons, express or implied,
regarding to the Manual.
About this Manual
This Manual is applicable to NS-0105P and NS-0109P series 100M long-range PoE switch.
The Manual includes instrucons for using and managing the product. Pictures, charts,
images and all other informaon hereinaer are for descripon and explanaon only. The
informaon contained in the Manual is subject to change, without noce, due to firmware
updates or other reasons. Please find the latest version in the company website
( ). hp://overseas.hikvision.com/en/
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properes of Hikvision in
various jurisdicons. Other trademarks and logos menoned below are the properes of
their respecve owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED,
WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS
AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A
PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL
HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY
SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG
OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS
OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN
IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE
WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE
CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT
THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS.

Specyfikacje produktu

Marka: Hikvision
Kategoria: przełącznik
Model: NS-0109P-60

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hikvision NS-0109P-60, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje przełącznik Hikvision

Hikvision

Hikvision DS-3E0516P-O Instrukcja

3 Października 2024
Hikvision

Hikvision NS-0106P-35 Instrukcja

15 Września 2024
Hikvision

Hikvision NS-0326P-230 Instrukcja

13 Września 2024
Hikvision

Hikvision NS-0318P-130 Instrukcja

4 Września 2024
Hikvision

Hikvision NS-0109P-60 Instrukcja

27 Sierpnia 2024

Instrukcje przełącznik

Najnowsze instrukcje dla przełącznik

Netgear

Netgear GS110TPP Instrukcja

15 Października 2024
ZyXEL

ZyXEL SFP-LHX1310-40-D Instrukcja

14 Października 2024
Tripp Lite

Tripp Lite B005-DPUA4 Instrukcja

11 Października 2024
Lancom

Lancom CS-8132F Instrukcja

9 Października 2024
Lancom

Lancom YS-7154CF Instrukcja

9 Października 2024
TP-Link

TP-Link Festa FS328G Instrukcja

9 Października 2024
Totolink

Totolink SW24DM Instrukcja

9 Października 2024
Totolink

Totolink SW1008P Instrukcja

9 Października 2024
Totolink

Totolink SW24G2 Instrukcja

9 Października 2024
Cudy

Cudy FS1006P Instrukcja

9 Października 2024