Instrukcja obsługi Hikvision DS-3E1326P-E

Hikvision przełącznik DS-3E1326P-E

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hikvision DS-3E1326P-E (86 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/86
DS-3E1310P-E/DS- -E/DS- -E 3E1318P 3E1326P
User Manual
UD.6L0202D2008A01
COPYRIGHT ©2016 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the
properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter
referred to be “Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot
be reproduced, changed, translated, or distributed, partially or wholly, by any means, without
the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not
make any warranties, guarantees or representations, express or implied, regarding to the
Manual.
About this Manual
This Manual is applicable to DS-3E1310P 3E1318P 3E1326P- -E/DS - -E/DS -E.
The Manual includes instructions for using and managing the product. Pictures, charts,
images and all other information hereinafter are for description and explanation only. The
information contained in the Manual is subject to change, without notice, due to firmware
updates or other reasons. Please find the latest version in the company website
( http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their
respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS
IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY
SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,
AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH
THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
- i -
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT
SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY
RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER
DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION,
OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT
LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO
ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL
NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE
PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE
LAW, THE LATER PREVAILS.
- - ii
Regulatory Information
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. (2) To avoid unnecessary radiation
interference, it is recommended to use a shielded RJ45 cable.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment.
Caution!
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. (2) To avoid unnecessary radiation
interference, it is recommended to use a shielded RJ45 cable.
IC
CAN ICES-3 A -3 A （ ）/NMB （ ）
- - iii
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid
danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Warnings
● Proper configuration of all passwords and other security settings is the responsibility of
the installer and/or end-user.
● In the use of the product, you must be in strict compliance with the electrical safety
regulations of the nation and region. Please refer to technical specifications for detailed
information.
● Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited
Power Source with 100~240 VAC or 12 VDC according to the IEC60950 1 standard. -
Please refer to technical specifications for detailed information.
● Do not connect several devices to one power adapter as adapter overload may cause
over-heating or a fire hazard.
● Please make sure that the plug is firmly connected to the power socket.
● If smoke, odor or noise rise from the device, turn off the power at once and unplug the
power cable, and then please contact the service center.
Warnings Follow
these safeguards to
prevent serious injury or death.
Cautions
Follow these precautions to
prevent potential injury or material damage.
- - iv
Thank you for purchasing our product. If there is any question or request, please do not
hesitate to contact dealer.
The figures in the manual are for reference only.
This manual is applicable to the models listed in the following table.
Model Description
DS Switch- -E 3E1310P 8+2G Web Smart PoE
DS- -E 3E1318P 16+2G Web Smart PoE Switch
DS- -E 3E1326P 24+2G Web Smart PoE Switch
Conventions
Typographical conventions in this User Manual:
Item Presentation Example
Button Shade “Click the Save button” can be simplified as “Click
Save ”.
Menu Bold “The menu Basic” can be simplified as Basic.
Continuous Steps > Click Wireless > Basic
Symbols in this User Manual:
Item Meaning
Note
This format is used to highlight information of importance or special interest.
Ignoring this type of note may result in ineffective configurations, loss of data
or damage to device.
Tip This format is used to highlight a procedure that will save time or resources.
- - vi
7.3 ONE KEY VLAN ........................................................................................................ 38
7.3.1 Configuration Wizard ........................................................................................... 39
7.3.2 ONE KEY VLAN .................................................................................................. 39
7.4 802.1Q VLAN ............................................................................................................ 40
7.4.1 Configuration Wizard ........................................................................................... 40
7.4.2 802.1Q VLAN Configuration ................................................................................ 41
7.4.3 Application Scenarios .......................................................................................... 46
8 Device Management ...................................................................................................... 49
8.1 MAC Binding ............................................................................................................. 49
8.1.1 Overview ............................................................................................................. 49
8.1.2 Configuring MAC Binding .................................................................................... 50
8.1.3 Application Scenarios .......................................................................................... 51
8.2 QoS ........................................................................................................................... 54
8.2.1 Overview ............................................................................................................. 54
8.2.2 Configuring QoS .................................................................................................. 55
8.3 STP ........................................................................................................................... 57
8.3.1 Global setting of STP .......................................................................................... 61
8.3.2 Port setting .......................................................................................................... 64
8.4 IGSP .......................................................................................................................... 66
8.5 SNMP ........................................................................................................................ 68
8.5.1 Overview ............................................................................................................. 68
8.5.2 Configure the SNMP ........................................................................................... 69
8.5.3 Application Scenarios .......................................................................................... 74
9 Configuration Management .......................................................................................... 77
9 .1 Backup Settings......................................................................................................... 77
9 .2 Restore Previous Settings ......................................................................................... 77
- - viii
1 Device Login
1.1 Login
The switch has the function of Web administration. Based on the function, administrators
could manage and maintain it in an intuitive way.
The first access to the switch allows you to enter the Web administration page through a
web browser by the default login info. The default info of Web login includes:
Login info Default settings
IP address 192.168.0.1
Username admin
Password admin
Log in to the Web administration page: (suppose that the login info is default)
1. Use an Ethernet cable to connect a computer and the RJ45 port of the switch;
2. Set the local IP address as “192.168.0.X” (X is 2~254), sharing the same network
segment with but different from the IP address of the switch. Subnet mask is set as
255.255.255.0;
3. Launch browser a web , input IP address of the switch “192.168.0.1”, and then tap Enter
on the keyboard;
- 1 -

Specyfikacje produktu

Marka: Hikvision
Kategoria: przełącznik
Model: DS-3E1326P-E

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hikvision DS-3E1326P-E, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje przełącznik Hikvision

Hikvision

Hikvision DS-3E0516P-O Instrukcja

3 Października 2024
Hikvision

Hikvision NS-0106P-35 Instrukcja

15 Września 2024
Hikvision

Hikvision NS-0326P-230 Instrukcja

13 Września 2024
Hikvision

Hikvision DS-3E1326P-E Instrukcja

7 Września 2024
Hikvision

Hikvision NS-0318P-130 Instrukcja

4 Września 2024
Hikvision

Hikvision NS-0105P-35 Instrukcja

3 Września 2024
Hikvision

Hikvision NS-0310P-60 Instrukcja

29 Sierpnia 2024
Hikvision

Hikvision NS-0109P-60 Instrukcja

27 Sierpnia 2024

Instrukcje przełącznik

Najnowsze instrukcje dla przełącznik

Intermatic

Intermatic P1101 Instrukcja

20 Marca 2025
AirLive

AirLive IG-641RPOE Instrukcja

12 Marca 2025
AirLive

AirLive IGM-1082RBT Instrukcja

12 Marca 2025
APC

APC AP7532 Instrukcja

10 Marca 2025
Lancom

Lancom GS-3628XP Instrukcja

10 Marca 2025
Advantech

Advantech EKI-9510E-2GMPW-B Instrukcja

10 Marca 2025
Theben

Theben ELPA 9 Instrukcja

5 Marca 2025
Digitus

Digitus DN-80113-2 Instrukcja

27 Lutego 2025
Leviton

Leviton 47611-C6B Instrukcja

25 Lutego 2025
Yamaha

Yamaha SWX2322P-16MT Instrukcja

22 Lutego 2025