Instrukcja obsługi Hikvision DS-PS1-I-WE

Hikvision detektor DS-PS1-I-WE

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hikvision DS-PS1-I-WE (4 stron) w kategorii detektor. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
DS-PS1-I-WE
Wireless Internal Sounder
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and all other informaon hereinaer are for descripon and explanaon only. The informaon contained in the Manual is subject to change,
without noce, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (hps://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporng the Product.
and other Hikvision's trademarks and logos are the properes of Hikvision in various jurisdicons. Other trademarks and logos menoned are the properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL
HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF
SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM
CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS
PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU
SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY
ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Appearance
1
2Indicaon
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable harmonized
European standards listed under the RE Direcve 2014/53/EU, the RoHS
Direcve 2011/65/EU.
replacement of a baery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium
baery types);
– disposal of a baery into fire or a hot oven, or mechanically crushing or cung of a baery, that can result in an
explosion;
– leaving a baery in an extremely high temperature surrounding environment that can
result in an explosion or the leakage of flammable liquid or gas; and
– a baery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid
or gas.
LED Indicaon Descripon
Buzzer
2012/19/EU (WEEE direcve): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the European
Union. For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collecon points. For more informaon see:
www.recyclethis.info
2006/66/EC (baery direcve): This product contains a baery that cannot be disposed of as unsorted municipal
waste in the European Union. See the product documentaon for specific baery informaon. The baery is marked
with this symbol, which may include leering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper
recycling, return the baery to your supplier or to a designated collecon point. For more informaon see:www.recy-
clethis.info
Armed
Operaons
Green LED flashes 7 mes.
Enrolled
Red LED flashes 3 mes.
Formaed
Red LED flashes twice.
Disarmed
Red LED flashes once.
Display Signal Strength
indicator turns red for 3 s.
indicator flashes red for 3 s.
Disconnected
Week Signal
indicator turns orange for 3 s
Medium Signal
indicator turns green for 3 s.Strong Signal
Check signal strength and select installaon place
Enter the signal checking mode by operang on the AX PRO.
Zone Alarm
Note:
-You can sign in web client “Device - Sounder - Sengs” or the
mobile client “wireless Device” to adjust the volume of buzzer.
-The zone alarm buzzer in volume level 3 compliants with EN
cerficaon.
Two beeps.
Disarmed
One beep.Armed
Fire bell.Fire Alarm
High and low frequency alternated
impulsive sound.
Panic Alarm
Rapid high frequency impulsive sound.
1
ON
OF F
Indicator Buzzer Set Screw Tamper
Screw Hole
Tamper Buon Power Switch
EN 50131-1:2006+A2:2017
EN 50131-4:2019
EN 50131-5-3:2017
Security Grade(SG) 2
Environmental Class(EC) II
Cerfied by Teleficaon
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
4Enrollment
5Installaon
1. Remove the screw on the boom of the sounder, and disassemble the peripheral and remove the rear panel.
Note:
for re-enrollment, you need to hold the tamper buon while powering the peripheral on simultaneously.
For power on again, push the power swith to ON at least 5 s aer power off.
2.Loosen the set screw at the boom of the sounder and remove the front panel.
-The addional force shall be equal to three mes the weight of the equipment but not
less than 50N. The equipment and its associated mounng means shall remain secure
during the installaon. Aer the installaon, the equipment, including any associated
mounng plate, shall not be damaged.
-Install the device on the place with nonflammable surface, such as concrete wall.
!
2
ON
OF F
ON
OFF
Enroll the Peripheral Locally
Enroll the Peripheral with APP
1. In the APP, tap the "Enrollment Mode" buon on the control panel page to make the control panel enter the enroll-
ment status.
2. Push the power switch of the peripheral to on, and it will be automacally enrolled to the control panel.
1. In the APP, tap the icon "+"and scan the QR code on the peripheral or enter the serial No. (Last 5 digit) of the peripheral.
2. Push the power switch of the peripheral to on, and it will be automacally enrolled to the control panel.
2. Log in to the APP Store, download and install App.
3. Power on the security control panel.
4. Log in the APP and tap the icon "+" . Scan the QR code or input the control panel serial No. (Last 5 digit) to add the
control panel.
5. Enroll the peripheral locally, with OR code, or with serial No..
1. Check signal strength and select installaon place
Enter the signal checking mode by operang on the control panel.
Signal indicator turns green for 3 s: Strong.
Signal indicator turns orange for 3 s: Medium.
Signal indicator turns red for 3 s: Weak.
Signal indicator flashes red for 3 s: Lost.
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Operaon
6
Formang
3.Secure the sounder with other three screws.
4.Fix the front panel on the sounder body. Tighten the set screw to complete the installaon.
Hold the tamper buon, and push the power switch to ON simultaneously. Release the tamper buon aer 8 s, and the
device will starts formang. While the formang is completed, the red LED flashes 3 mes.
3
ON
OF F
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

Specyfikacje produktu

Marka: Hikvision
Kategoria: detektor
Model: DS-PS1-I-WE

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hikvision DS-PS1-I-WE, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje detektor Hikvision

Hikvision

Hikvision DS-PI-T250 Instrukcja

8 Grudnia 2024
Hikvision

Hikvision DS-PI-D40 Instrukcja

8 Grudnia 2024
Hikvision

Hikvision DS-2FM2466 Instrukcja

2 Października 2024
Hikvision

Hikvision DS-TPS100 Instrukcja

2 Września 2024
Hikvision

Hikvision IDS-TP40-04L Instrukcja

29 Sierpnia 2024
Hikvision

Hikvision DS-PT1-WE Instrukcja

28 Sierpnia 2024
Hikvision

Hikvision DS-PDBG8-EG2-WB Instrukcja

19 Sierpnia 2024
Hikvision

Hikvision DS-PS1-I-WE Instrukcja

7 Sierpnia 2024
Hikvision

Hikvision DS-PTA-WL-433 Instrukcja

7 Sierpnia 2024

Instrukcje detektor

Najnowsze instrukcje dla detektor

Vimar

Vimar 14420.SL Instrukcja

11 Stycznia 2025
Milwaukee

Milwaukee LRD100 Instrukcja

8 Stycznia 2025
Seaward

Seaward LLT MK2 Instrukcja

3 Stycznia 2025
Sauter

Sauter SO 200K Instrukcja

30 Grudnia 2025
IFM

IFM OIP282 Instrukcja

30 Grudnia 2025
IFM

IFM O5P503 Instrukcja

30 Grudnia 2025
Toolcraft

Toolcraft LDM D30 Instrukcja

29 Grudnia 2024
Mercury

Mercury MDW-01 Instrukcja

29 Grudnia 2024
Chauvin Arnoux

Chauvin Arnoux C.A 1110 Instrukcja

28 Grudnia 2024
PCE Instruments

PCE Instruments PCE-MPC 30 Instrukcja

28 Grudnia 2024